Cleco A8R310M A8 Series Reversible Axial Piston Air Motor | 2.7 HP | 765 RPM | 64 (ft-lbs) Stall Torque | Rear Exhaust

When equipment needs more torque than a direct-speed air motor but still requires controlled rotary speed, the Cleco A8R310M A8 Series Reversible Axial Piston Air Motor provides 2.7 HP, 765 RPM free speed, and 64 ft-lbs of stall torque for powering driven machinery from compressed air. Its axial piston design (pistons arranged parallel to the motor shaft to produce smooth rotary output) gives machine builders and maintenance teams a compact pneumatic drive option for conveyors, mixers, turntables, winches, and custom equipment.

The 3.4-1 gear ratio lowers output speed while increasing usable torque compared with the 1-1 A8 model, making this motor better suited for applications where load control matters more than top-end speed. Reversible operation supports clockwise or counterclockwise rotation when installed with the proper pneumatic control setup, while rear exhaust routes spent air away from the driven component and helps simplify installation in guarded or enclosed machine layouts.

Type: Air Motor | Series: A8 Series | Motor Configuration: Axial Piston | Control: Reversible | Power: 2.7 HP / 2.01 kW | RPM at Max HP: 375 RPM | Free Speed: 765 RPM | Stall Torque: 64 ft-lbs / 87 Nm | Mount: Face Mounting | Spindle Type: 1/8" Keyed Spindle | Gear Ratio: 3.4-1 | Length: 17.5" / 445 mm | Weight: 2.1 lb / 0.95 kg | Air Consumption: 112 SCFM | Air Inlet: 1/2" NPTF | Exhaust: Rear

Features:

• Axial piston air motor configuration delivers pneumatic rotary power for machinery, fixtures, and equipment drives.
• Reversible control allows the motor to operate in either direction when paired with the correct air control arrangement.
• 3.4-1 gear ratio reduces output speed and increases torque availability for slower, higher-load machine functions.
• Rear exhaust helps direct spent air away from the work area, driven component, or guarded equipment enclosure.
• Face mounting supports fixed installation on machine frames, brackets, production equipment, and custom-built assemblies.
• Keyed spindle provides positive mechanical engagement with compatible couplings, pulleys, sprockets, or other drive components.
• Air motor operation supports stall-tolerant performance in applications where pneumatic power is preferred over electric drive components.

Made in USA:

Applications:

• Machine building and automation — driving rotary tables, indexing fixtures, and equipment functions requiring reversible pneumatic motion.
• Material handling systems — powering conveyor sections, rollers, and controlled movement mechanisms where compressed air is already available.
• Mixing and agitation equipment — supplying moderate-speed, higher-torque output for compatible mixer and agitator assemblies.
• Industrial MRO and repair — replacing an existing A8 Series air motor or specifying a pneumatic drive during machine rebuilds.
• Custom pneumatic equipment — integrating into winch, lift-assist, packaging, and fixture designs that require compact rotary power.

FAQs:

• Q: What makes the A8R310M different from the A8R309M?
  A: The A8R310M uses a 3.4-1 gear ratio, giving it a lower 765 RPM free speed and higher 64 ft-lbs stall torque. The A8R309M is a faster 1-1 model with 2,600 RPM free speed and lower stall torque.
• Q: What does “stall torque” mean on this air motor?
  A: Stall torque is the torque available when the motor stops under load. For this model, 64 ft-lbs helps compare the motor’s load-holding and low-speed capability against the torque requirement of the driven equipment.
• Q: Can this motor run forward and reverse?
  A: Yes. The A8R310M is listed as reversible, so it can provide rotation in either direction when installed with the appropriate pneumatic controls.
• Q: What air supply does the A8R310M require?
  A: The catalog lists a 1/2" NPTF air inlet and 112 SCFM in the model table. The air compressor, piping, valves, and FRL should be sized to maintain adequate airflow at the motor during loaded operation.
• Q: Is this motor a direct replacement for an electric motor?
  A: It may be used in place of an electric motor when the machine’s speed, torque, mounting, shaft connection, air supply, and control requirements match. Final fit should be confirmed against the equipment design before ordering.

Looking for more information about Cleco Air Motor? Click here to view the Catalog

Need help selecting the correct Cleco Air Motors for your application? Please call (800) 608-5210 or email info@intlairtool.com