Cleco 216GLSB-135A-W3T4 Extended Head Angle Grinder | 216 Series | 0.6 HP | 13,500 RPM | Aluminum Housing | Side Exhaust

When recessed welds, pipe sections, and tight fabrication areas leave limited working room, the Cleco 216GLSB-135A-W3T4 extended-head right-angle grinder gives technicians added reach without stepping up to a larger tool body. It's a 0.6 HP pneumatic motor and 13,500 RPM free speed support fast cutting and grinding with compatible 4" Type 1 abrasive wheels, while the right-angle head helps position the wheel where inline tools cannot maintain proper access.

Part of Cleco’s 216 Series, this model combines an aluminum housing, side exhaust, and 3/8"-24 external spindle for material removal work in metal fabrication, welding, transportation equipment repair, and general industrial MRO. The extended head improves reach into corners, channels, and assemblies where clearance is limited, while the lock-off lever helps reduce unintended starts during handling.

Type: Extended Head Right Angle Grinder | Series: 216 Series | Model: 216GLSB-135A-W3T4 | Power: 0.6 HP / 0.4 kW | Free Speed: 13,500 RPM | Abrasive Capacity: 4" / 100 mm Type 1 | Housing: Aluminum | Spindle Size: 3/8"-24 External Thread | Exhaust: Side | Weight: 2.43 lb | Length: 9.1" | Head Height: 2.20" | Air Inlet: 1/4" | Minimum Hose I.D.: 5/16" / 7.9 mm | Performance Rating: 90 PSI / 620 kPa

Features:

• Extended head reaches into tighter or recessed areas where a standard right angle grinder may not provide enough clearance.
• Rugged and durable aluminum housing helps keep the tool body light while supporting regular use in fabrication and repair environments.
• 13,500 RPM free speed supports efficient cutting and grinding when paired with properly rated 4" Type 1 abrasive wheels.
• Side exhaust directs air away from the work area and helps reduce debris disturbance compared with forward exhaust layouts.
• 3/8"-24 external spindle matches the specified wheel mounting configuration for this grinder model.
• Lock-off lever adds a safety-focused start control to help prevent accidental throttle activation.
• Standard equipment includes wheel guard, wheel adapter, spindle wrench, operating instructions, and service manual.

Made in USA:

Applications:

• Metal fabrication shops — cutting and grinding around frames, weldments, brackets, and structural components where added head reach improves access.
• Welding and repair work — cleaning, trimming, and grinding near weld beads, pipe joints, and fabricated assemblies.
• Transportation equipment maintenance — working around vehicle frames, trailers, equipment panels, and service areas with restricted tool clearance.
• Industrial MRO — maintaining machinery, fixtures, guards, and plant equipment that require controlled grinding access in confined spots.
• Garage and shop repair — use by experienced operators for metal repair tasks when the compressor, abrasive wheel, and safety equipment match the tool requirements.

FAQs:

• Q: What abrasive wheels fit the Cleco 216GLSB-135A-W3T4?
  A: This model is specified for 4" / 100 mm Type 1 abrasive wheels. Always confirm that the wheel is compatible with the 3/8"-24 external spindle and is rated at or above 13,500 RPM.
• Q: What does the extended head help with?
  A: The extended head moves the working end farther from the grip area, giving the operator better reach into corners, channels, and recessed assemblies. This is useful when a standard right angle grinder cannot reach the work without interference.
• Q: Is this the same as the Type 27 version?
  A: No. The 216GLSB-135A-W3T4 is listed for 4" Type 1 wheels. Cleco’s D3T4 variation in this same extended-head family is the Type 27 version, so wheel type should be checked carefully before ordering accessories.
• Q: What air supply does this grinder require?
  A: Cleco rates this tool’s performance at 90 PSI / 620 kPa and specifies a 5/16" / 7.9 mm minimum hose I.D. Use a properly sized compressor and FRL to maintain speed under load.
• Q: Does this grinder include the wheel guard and mounting hardware?
  A: Yes. The catalog lists standard equipment as wheel guard, wheel adapter, spindle wrench, operating instructions, and service manual.

Looking for more information about Cleco Grinder? Click here to view the Catalog

Need help selecting the correct Cleco Grinders for your application? Please call (800) 608-5210 or email info@intlairtool.com