Cleco 216GLSB-135A-D3T4 Extended Head Right Angle Grinder | 216 Series | 0.6 HP | 13,500 RPM | Aluminum Housing | Side Exhaust

When grinding access is limited by frames, channels, weldments, or recessed assemblies, the Cleco 216GLSB-135A-D3T4 extended head right-angle grinder gives operators added reach while keeping the tool compact enough for controlled handling. Its 0.6 HP pneumatic motor and 13,500 RPM free speed support fast material removal with compatible 4" Type 27 depressed center wheels, which are grinding wheels with a recessed hub area that helps provide clearance around the mounting hardware.

Part of Cleco’s 216 Series Heritage grinder family, this model combines an aluminum housing, side exhaust, and 3/8"-24 external spindle for metal fabrication, weld cleanup, equipment repair, and plant maintenance work. The extended right-angle head improves reach into tight work zones, while the lock-off lever helps reduce the chance of unintended throttle activation during handling or repositioning.

Type: Extended Head Right Angle Grinder | Series: 216 Series | Model: 216GLSB-135A-D3T4 | Power: 0.6 HP / 0.4 kW | Free Speed: 13,500 RPM | Abrasive Capacity: 4" / 100 mm Type 27 | Spindle Size: 3/8"-24 External Thread | Housing: Aluminum | Exhaust: Side | Overall Length: 9.1" / 231 mm | Weight: 2.4 lb / 1.1 kg | Head Height: 2.2" | Air Inlet: 1/4" NPT | Air Consumption: 25 CFM

Features:

• An extended head improves reach and accessibility in recessed or obstructed work areas.
• Right-angle configuration helps position the abrasive wheel against welds, edges, corners, and fabricated assemblies.
• 0.6 HP pneumatic motor provides compact grinding power for controlled material removal.
• 13,500 RPM free speed supports efficient grinding when used with properly rated 4" Type 27 wheels.
• Rugged aluminum housing helps reduce tool weight while supporting shop and maintenance use.
• Side exhaust directs air away from the front of the tool and helps reduce disturbance around the grinding point.
• Lock-off lever supports safer operation by helping prevent accidental throttle activation.
• Standard equipment includes wheel guard, wheel adapter, spindle wrench, operating instructions, and service manual.

Made in USA:

Applications:

• Metal fabrication — grinding weld beads, edge profiles, brackets, and formed components where added head reach improves access.
• Welding repair — cleaning and blending around joints, frames, pipe sections, and fabricated assemblies.
• Industrial maintenance — removing material from machine guards, fixtures, worn components, and plant equipment during repair work.
• Transportation and equipment service — working around trailer frames, vehicle structures, equipment housings, and other tight metal repair areas.
• Shop and garage use — suitable for experienced users performing metal grinding tasks with the correct air supply, abrasive wheel, and PPE.

FAQs:

• Q: What wheel type does the Cleco 216GLSB-135A-D3T4 use?
  A: This model is specified for 4" / 100 mm Type 27 depressed center wheels. Do not substitute Type 1 cut-off wheels unless the tool and guard configuration are confirmed for that wheel type.
• Q: What is the difference between D3T4 and W3T4 versions?
  A: The D3T4 version is configured for Type 27 depressed center wheels, while the W3T4 companion model is configured for Type 1 wheels. The wheel type is a critical safety and compatibility detail when choosing abrasives.
• Q: Why choose an extended head right angle grinder?
  A: The extended head helps reach around obstructions, into corners, and across recessed surfaces where a standard right angle grinder may not fit comfortably. It is useful for fabrication and repair work where tool clearance is limited.
• Q: What air supply should be used with this grinder?
  A: The manufacturer data lists 25 CFM air consumption and a 1/4" NPT air inlet. Use a properly sized compressor and air line setup capable of maintaining tool speed under load.
• Q: Does this grinder include the wheel guard?
  A: Yes. Standard equipment listed for this model includes the wheel guard, wheel adapter, spindle wrench, operating instructions, and service manual.

Looking for more information about Cleco Grinder? Click here to view the Catalog

Need help selecting the correct Cleco Grinders for your application? Please call (800) 608-5210 or email info@intlairtool.com