Cleco 19TTS03Q Pneumatic Stall T-Handle Screwdriver | Trigger Start | 19 Series | 1,900 RPM | 2.1 (ft-lbs) Max Torque | 1/4" Hex Quick Change Drive

Built for controlled fastening in assembly cells, repair benches, and production workstations, the Cleco 19TTS03Q pneumatic stall T-handle screwdriver combines a compact pistol-style body with a 1/4" hex quick change drive for fast bit changes on common hex-shank screwdriver bits. It's 1,900 RPM free speed supports efficient rundown on repetitive fastening tasks, while the 2.1 ft-lbs maximum torque rating provides a light-duty torque range for small screws, trim fasteners, appliance hardware, and similar low-torque assemblies.

The stall mechanism (a torque-control style where the motor stalls when the fastener reaches resistance) gives buyers a simple pneumatic option for applications that do not require a shut-off clutch or electronic controller. A trigger start layout gives the operator direct start/stop control, while the "T" style handle, two interchangeable soft-touch grip sizes, and adjustable reverse lever support left- or right-hand operation on the line.

Type: Pneumatic Stall T-Handle Screwdriver | Series: 19 Series | Model: 19TTS03Q | Start Type: Trigger Start | Drive Size: 1/4" Hex Quick Change | Torque Range: 0 - 2.9 Nm / 0 - 2.1 ft-lbs | Free Speed: 1,900 RPM | Length: 6.1 in. | Weight: 1.19 lb / 0.54 kg | Air Consumption: 11.0 SCFM | Air Inlet Size: 1/4 in. | Rated Air Pressure: 90 PSI / 620 kPa

Features:

• 1/4" hex quick change drive allows fast bit swaps for common screwdriver bits used in production fastening.
• Trigger start gives the operator direct control over tool activation during repetitive screwdriving work.
• Stall torque-control design provides a straightforward pneumatic fastening option for low-torque assembly tasks.
• "T" style handle gives the operator a pistol-style grip shape for controlled handling at the workstation.
• Two interchangeable soft-touch grip sizes help match the tool grip to different operator hand sizes.
• Adjustable reverse lever supports true one-hand left or right operation for fastening and removal.
• Standard equipment includes operating instructions and service manual, suspension bail, and all torque springs required to meet the indicated torque.

Applications:

• Light manufacturing assembly — running small screws into housings, brackets, covers, and subassemblies where a compact pneumatic screwdriver is preferred.
• Appliance and electronics production — fastening panels, small hardware, and internal components within the tool’s 2.1 ft-lbs maximum torque range.
• Automotive interior and trim work — installing light fasteners, clips, trim screws, and interior hardware during assembly or service operations.
• Aerospace and precision assembly support — repetitive low-torque fastening where quick bit changes and controlled handling are important.
• Maintenance benches and repair stations — removing and reinstalling small screws during component service, rebuilds, and inspection work.

FAQs:

• Q: What does “stall” mean on this Cleco screwdriver?
  A: A stall screwdriver uses motor stall as the torque-control method. When the fastener reaches resistance, the tool stalls instead of using a shut-off clutch, making it a simple option for low-torque assembly work.
• Q: What bits fit the 19TTS03Q?
  A: This model uses a 1/4" hex quick change drive, which accepts compatible 1/4" hex-shank screwdriver bits. Bit style and length should be selected for the screw type and work access requirements.
• Q: Is this the right tool for high-torque screws or bolts?
  A: No. The 19TTS03Q is rated up to 2.1 ft-lbs, so it is intended for small fasteners and light assembly work. For higher torque requirements, choose a larger Cleco screwdriver or nutrunner with the appropriate torque range.
• Q: What air pressure is required?
  A: Tool performance is rated at 90 PSI / 620 kPa. Use a properly regulated air supply to keep speed and torque output consistent during production use.
• Q: What is included with the tool?
  A: Standard equipment includes the operating instructions and service manual, suspension bail, and all torque springs required to meet the indicated torque range.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com