Cleco 135DPV-7B-50 Pistol Drill Non-Reversible Variable Speed | 135DPV Series | 600 RPM | 1/2" Chuck | Rear Exhaust

Built for low-speed, higher-capacity hole drilling in production, fabrication, and maintenance settings, the Cleco 135DPV-7B-50 Non-Reversible Variable Speed Pistol Drill delivers 0.7 HP with a 600 RPM free speed for controlled drilling with larger bits. The 1/2" chuck expands bit capacity compared with smaller 3/8" drill models, while the pistol grip format gives operators a familiar hand position for bench work, fixture drilling, and general shop drilling tasks.

The 135DPV Series uses variable speed operation with calibrated governed speed control, which means the tool speed can be managed within a defined range instead of depending only on trigger pressure. That makes this drill useful when starting holes, working with larger drill diameters, or matching drilling speed to the material. Its rear exhaust routes spent air away from the drilling point to help reduce chip disturbance around the work surface.

Type: Non-Reversible Variable Speed Pistol Drill | Series: 135DPV Series | Model: 135DPV-7B-50 | Power: 0.7 HP / 0.52 kW | Free Speed: 600 RPM | Governed Speed Range: 150–550 RPM | Chuck Capacity: 1/2" Heavy Duty | Housing: Aluminum | Length: 9.6" / 244 mm | Weight: 3.6 lbs / 1.63 kg | Air Inlet: 1/4" NPT | Minimum Hose Size: 1/4" / 6 mm | Exhaust: Rear

Features:

• Variable speed operation allows the user to adjust drilling speed for bit size, hole starting, and material conditions.
• Calibrated governed speed control supports more consistent speed management during repeated drilling work.
• 600 RPM free speed provides controlled cutting action for larger bits and lower-speed drilling tasks.
• 0.7 HP motor output supplies practical power for production drilling, shop fabrication, and maintenance work.
• 1/2" heavy duty chuck accepts larger shank drill bits than comparable 3/8" chuck models in the same family.
• Non-reversible configuration keeps the tool focused on forward drilling applications.
• Rear exhaust helps move air discharge away from the hole location and operator sightline.
• Aluminum housing keeps the tool at 3.6 lbs for manageable handling during repeated drilling cycles.

Applications:

• Fabrication and metalworking shops — drilling holes in brackets, plates, frames, and fixture components.
• Production assembly areas — repeated drilling where a 1/2" chuck and governed speed range help standardize workstation output.
• Industrial maintenance and MRO — repair drilling, rework, field modification, and replacement-part preparation.
• Fixture, jig, and tooling work — controlled hole-making through guides, templates, and bench-mounted workpieces.
• General shop drilling — air-powered drilling tasks where a pistol grip tool is preferred over an electric drill for continuous compressed-air use.

FAQs:

• Q: What is the difference between the 135DPV-7B-50 and 135DPV-7B-43?
  A: The 135DPV-7B-50 is the 1/2" chuck version, while the 135DPV-7B-43 is listed with a 3/8" heavy duty chuck. Choose the 1/2" model when your drill bits or application require the larger chuck capacity.
• Q: Is this Cleco pistol drill reversible?
  A: No. This model is listed as non-reversible, so it is intended for forward drilling rather than reversing bits or backing out fasteners.
• Q: Why choose a 600 RPM air drill instead of a faster model?
  A: Lower-speed drills are often preferred for larger bits and more controlled hole-making. The slower speed helps reduce grabbing and can improve control when starting holes or drilling tougher materials.
• Q: What does variable speed mean on this drill?
  A: Variable speed allows the operator to adjust how fast the drill runs, rather than operating at a single fixed output. On this model, the governed speed range helps keep speed control more consistent during repetitive work.
• Q: What air setup should be used with this tool?
  A: The listed connection data includes a 1/4" NPT air inlet and 1/4" minimum hose size. Use clean, regulated, lubricated compressed air and size the supply for the tool’s duty cycle.

Looking for more information about Cleco Drill? Click here to view the Catalog.

Need help selecting the correct Cleco Drills for your application? Please call (800) 608-5210 or email info@intlairtool.com