Chicago Pneumatic Reversible Pistol Grip Drill | CP1114R05 | 500 RPM | 1/2" Chuck

Built for low-speed drilling, reaming, and tapping in fabrication, maintenance, and repair environments, the Chicago Pneumatic CP1114R05 pistol reversible pneumatic drill combines a 0.55 HP / 410 W air motor with 500 RPM free speed for controlled holemaking in tougher materials. Its 18.6 ft-lb / 25.2 Nm stall torque gives the drill strong twisting force before the motor stalls under load, making it well suited for larger bits, tapping work, and controlled feed applications where speed alone is not the priority. The 1/2" / 13 mm keyed Jacobs Industrial chuck provides secure bit retention for accurate, hard drilling, while the reversible function helps with backing out bits, reaming, and tapping. A teasing trigger, meaning a progressive throttle that increases speed as trigger pressure increases, gives the operator better control during starts and delicate feed adjustments. The CP Ergo Wing body helps align the wrist and tool for improved force transfer during repeated drilling operations.

Type: Pistol Reversible Pneumatic Drill | Series: CP1114R | Model: CP1114R05 | SKU: 6151580310 | Power: 0.55 HP / 410 W | Free Speed: 500 RPM | Chuck Capacity: 1/2" / 13 mm | Chuck Type: Keyed | Stall Torque: 18.6 ft-lb / 25.2 Nm | Handle Type: Pistol | Reversible: Yes | Starting System: Trigger | Trigger Type: Progressive | Main Material: Aluminum | Air Consumption at Load: 25 CFM | Air Consumption at Free Speed: 31 CFM | Air Inlet: 1/4" NPT | Min. Hose Diameter: 3/8" / 10 mm | Max Dynamic Air Working Pressure: 90 PSI / 6.3 bar | Length: 8.46" / 215 mm | Weight: 2.87 lb / 1.3 kg | Sound Pressure: 82 dB(A) | Sound Power: 93 dB(A) | Vibration: 2.6 m/s² | Vibration Uncertainty K: 1.1 m/s²

Features:

• 0.55 HP / 410 W pneumatic motor provides controlled power for low-speed drilling, reaming, and tapping.
• 500 RPM free speed supports larger bits and controlled feed work in steel, stainless steel, aluminum, and similar materials.
• 1/2" Jacobs Industrial keyed chuck helps maintain bit grip during accurate and hard drilling operations.
• Forward/reverse switch assists with backing out bits, clearing holes, and tapping applications.
• Teasing trigger provides progressive speed control for smoother starts and better feed control.
• CP Ergo Wing body supports wrist-to-tool alignment for improved force transmission during repeated use.
• Built-in silencer helps lower tool noise in shop and production environments.
• Triple full caged planetary gears and up to 800-hour service interval support planned maintenance when used according to CP instructions.

Applications:

• Metal fabrication and machine repair: Drilling, reaming, and tapping holes in brackets, fixtures, guards, and fabricated components.
• Industrial MRO and plant maintenance: Preparing mounting holes, modifying replacement parts, and supporting routine equipment repair work.
• Fleet and vehicle service: Controlled drilling and rework on frames, brackets, panels, and shop-built repair components.
• Production and assembly shops: Repetitive holemaking where a reversible 1/2" keyed-chuck air drill is preferred over electric tooling.
• Professional garage and metalworking users: Low-speed, higher-torque drilling when small cordless drills do not provide the control or stall torque needed.

FAQs:

• Q: What does stall torque mean on the CP1114R05?
  A: Stall torque is the twisting force available just before the air motor stops under load. The CP1114R05 is rated at 18.6 ft-lb / 25.2 Nm, which helps with larger bits, controlled drilling, reaming, and tapping work.
• Q: Is 500 RPM considered a fast air drill?
  A: No. The 500 RPM speed is the low-speed, higher-torque end of the CP1114R range. It is better for controlled drilling and tapping than for small, high-speed holemaking.
• Q: What size air compressor and hose does this drill need?
  A: The tool is rated for 25 CFM air consumption at load and 90 PSI maximum dynamic working pressure. Use at least a 3/8" / 10 mm air hose and an air supply capable of maintaining the required flow during use.
• Q: Does the CP1114R05 use a keyed or keyless chuck?
  A: This model uses a keyed Jacobs Industrial chuck with 1/2" / 13 mm maximum capacity. A keyed chuck is tightened with a chuck key to help secure the bit during harder drilling operations.
• Q: Is this the ATEX version of the CP1114R05?
  A: No. SKU 6151580310 is the standard CP1114R05. Chicago Pneumatic lists a separate CP1114R05 ATEX model for applications requiring ATEX-rated tooling.

Looking for more information about Chicago Pneumatic Drill? Click here to view the Catalog.

For help selecting the correct Chicago Pneumatic Drills for your assembly application, call (800) 608-5210 or email info@intlairtool.com