Chicago Pneumatic Reversible Pistol Grip Air Drill | CP1114R05 ATEX | 500 RPM | 1/2" Chuck

Built for drilling, tapping, and reaming in potentially explosive atmospheres, the Chicago Pneumatic CP1114R05 ATEX reversible pistol grip drill combines low-speed control with ATEX-area suitability. Its 500 RPM free speed helps keep larger bits, taps, and reamers under control, while the 1/2" / 13 mm keyed Jacobs industrial chuck secures larger shank tooling for accurate drilling in aluminum, steel, stainless steel, and plant maintenance materials. The 0.55 HP / 410 W pneumatic motor gives the drill usable power for production and MRO work, and the 18.6 ft-lbf / 25.2 Nm stall torque supports higher-resistance drilling where smaller, faster drills may be harder to manage.

The ATEX configuration adds a protected chuck to help reduce spark risk by preventing the chuck from touching surrounding objects. ATEX refers to European directives for equipment used in explosive atmospheres, and Chicago Pneumatic lists the CP1114R ATEX range as certified EX II 2 G and Ex h IIB T6 Gb X for approved use in Zone 2 gas and Zone 22 dust areas. A progressive teasing trigger provides gradual speed control, while the CP Ergo Wing body, adjustable side handle, built-in silencer, and low-vibration gearbox support safer, steadier handling during controlled drilling operations.

Type: ATEX Reversible Pistol Grip Pneumatic Drill | Model: CP1114R05 ATEX | SKU: 6151580380 | Free Speed: 500 RPM | Max Power: 0.55 HP / 410 W | Chuck Capacity: 1/2" / 13 mm | Chuck Type: Keyed Jacobs Industrial Chuck | Stall Torque: 18.6 ft-lbf / 25.2 Nm | ATEX Marking: EX II 2 G and Ex h IIB T6 Gb X | Approved Areas Listed by CP: Zone 2 Gas and Zone 22 Dust | Air Consumption at Load: 25 CFM / 12 l/s | Air Consumption at Free Speed: 31 CFM / 15 l/s | Air Inlet: 1/4" NPT | Working Pressure: 90 PSI / 6.3 bar | Min. Hose Diameter: 0.38" / 10 mm | Length: 10.95" / 278.1 mm | Height: 5.97" / 151.7 mm | Width: 2.26" / 57.4 mm | Weight: 4.41 lb / 2 kg | Sound Pressure: 82 dB(A) | Sound Power: 93 dB(A) | Vibration Level: 2.6 m/s² / 8.5 ft/s² | Vibration Uncertainty K: 1.1 m/s² / 3.6 ft/s² | Main Material: Aluminum | Handle Type: Pistol | Starting System: Trigger | Trigger Type: Progressive

Features:

• ATEX model for drilling, tapping, and reaming operations in potentially explosive atmospheres.
• Protected chuck helps reduce spark risk by preventing chuck contact with surrounding objects.
• 500 RPM free speed provides low-speed control for larger bits, harder materials, and threaded operations.
• High power 0.5 HP class motor with excellent control through the teasing throttle handle.
• Jacobs industrial keyed chuck supports accurate, hard drilling with 3/8" to 1/2" capacity tooling.
• Forward/reverse switch and adjustable side handle support drilling, reaming, tapping, and bit extraction tasks.
• Strong and precise gearbox uses a high-durability design for reduced vibration during aggressive drilling.
• Built-in silencer reduces operating noise, while CP Ergo Wing geometry supports wrist and tool alignment.

Applications:

• Oil and gas maintenance: controlled drilling, reaming, and tapping in areas where ATEX-rated tools are required by site safety procedures.
• Petrochemical plants: maintenance drilling on brackets, panels, guards, and equipment supports in classified work zones.
• Mining operations: repair and fabrication tasks where pneumatic power and spark-risk reduction are preferred over standard electric drills.
• Industrial MRO: low-speed drilling and bit extraction on production equipment, fixtures, and plant infrastructure.
• Metal fabrication in controlled areas: drilling aluminum, steel, and stainless steel with a 1/2" keyed chuck and progressive speed control.

FAQs:

• Q: What does ATEX mean on the CP1114R05 ATEX drill?
  A: ATEX refers to European directives covering equipment used in potentially explosive atmospheres. Chicago Pneumatic lists the CP1114R ATEX range for drilling, tapping, and reaming operations in approved classified areas.
• Q: What classified areas does Chicago Pneumatic list for this ATEX drill?
  A: Chicago Pneumatic lists the CP1114R ATEX range as certified EX II 2 G and Ex h IIB T6 Gb X and approved for jobs in Zone 2 gas and Zone 22 dust areas. Always confirm site-specific safety requirements before use.
• Q: Why choose the 500 RPM CP1114R05 ATEX instead of a faster model?
  A: The 500 RPM version is the better choice when the job needs slower speed, higher control, and steadier torque handling. It is especially useful for larger bits, reaming, and tapping compared with higher-speed drill models.
• Q: What air supply does the CP1114R05 ATEX require?
  A: Chicago Pneumatic lists 25 CFM air consumption at load and 31 CFM at free speed. Use an air system that can maintain 90 PSI / 6.3 bar at the tool with a minimum 0.38" / 10 mm hose diameter.
• Q: What is the protected chuck used for?
  A: The protected chuck is intended to reduce spark risk by preventing the chuck from contacting surrounding objects. This feature is specific to the ATEX models in the CP1114R and CP1117 drill ranges.

Looking for more information about Chicago Pneumatic Drill? Click here to view the Catalog.

For help selecting the correct Chicago Pneumatic Drills for your assembly application, call (800) 608-5210 or email info@intlairtool.com