Chicago Pneumatic Pistol Grip Air Drill | CP1117P05 ATEX | 500 RPM | 1/2" Chuck

Built for high-torque drilling in classified work areas, the Chicago Pneumatic CP1117P05 ATEX pistol grip drill delivers 500 RPM free speed for controlled hole-making with larger bits, reamers, and hard industrial materials. Its 1/2" / 13 mm keyed Jacobs industrial chuck helps secure larger shank tooling, while the 1.01 HP / 750 W pneumatic motor provides more power than the smaller CP1114R drill family. With 22.1 ft-lbf / 30 Nm stall torque, this drill is suited for slow, controlled drilling in steel, stainless steel, composites, and plant maintenance materials where bit control matters more than drilling speed.

The ATEX configuration is built for approved use in potentially explosive atmospheres, and ATEX refers to equipment intended for classified areas where explosive gases, vapors, or dust may be present. Chicago Pneumatic lists this model with II 2 G Ex h IIB T6 Gb X ATEX marking, and the ATEX version includes a protected chuck to help reduce spark risk by preventing chuck contact with surrounding objects. This model is not reversible, so it should be selected for forward drilling and reaming operations rather than jobs that require reverse for backing out taps or threaded tooling.

Type: ATEX Pistol Grip Pneumatic Drill | Model: CP1117P05 ATEX | SKU: 6151580350 | Free Speed: 500 RPM | Max Power: 1.01 HP / 750 W | Chuck Capacity: 1/2" / 13 mm | Chuck Type: Keyed Jacobs Industrial Chuck | Stall Torque: 22.1 ft-lbf / 30 Nm | ATEX Marking: II 2 G Ex h IIB T6 Gb X | Reversible: No | Air Consumption at Load: 29 CFM / 14 l/s | Air Consumption at Free Speed: 34 CFM / 16 l/s | Air Inlet: 1/4" NPT | Working Pressure: 90 PSI / 6.3 bar | Min. Hose Diameter: 0.38" / 10 mm | Length: 10.56" / 268.3 mm | Height: 5.94" / 150.9 mm | Width: 2.43" / 61.8 mm | Weight: 4.96 lb / 2.25 kg | Sound Pressure: 84 dB(A) | Sound Power: 95 dB(A) | Vibration Level: 2.7 m/s² / 8.9 ft/s² | Vibration Uncertainty K: 2 m/s² / 6.6 ft/s² | Main Material: Aluminum | Handle Type: Pistol | Starting System: Trigger | Trigger Type: Progressive

Features:

• ATEX model supports drilling work in approved potentially explosive atmospheres where classified-area tool selection is required.
• Protected chuck helps reduce the risk of sparks by preventing the chuck from contacting nearby objects during use.
• 500 RPM free speed gives the operator low-speed control for larger drill bits, reaming, and hard-material drilling.
• High power 1 HP / 750 W pneumatic motor provides strong output for industrial production and intensive-duty drilling tasks.
• Jacobs industrial keyed chuck supports accurate drilling with 1/2" / 13 mm chuck capacity.
• Progressive teasing throttle gives the operator gradual speed control for smoother starts and better bit placement.
• Compact CP Ergo Wings body supports improved hand and wrist alignment during repeated drilling work.
• Low noise, low vibration construction and built-in silencing help improve handling during daily industrial use.

Applications:

• Oil and gas maintenance: controlled drilling in classified areas where ATEX-rated pneumatic tools are required by site procedure.
• Petrochemical facilities: drilling brackets, covers, guards, panels, and repair components where spark-risk reduction is a major tool-selection factor.
• Metalworking and fabrication: slow drilling in steel, stainless steel, composites, and other materials when 1/2" chuck capacity is needed.
• Industrial maintenance and MRO: forward drilling and reaming on equipment, fixtures, and plant infrastructure in air-equipped work areas.
• Production drilling stations: repeated larger-hole drilling where pneumatic power, progressive trigger control, and ATEX configuration are required.

FAQs:

• Q: Is the CP1117P05 ATEX reversible?
  A: No. Chicago Pneumatic lists this model as non-reversible, so it is intended for forward drilling and similar operations. If reverse operation is required for tapping or backing out tooling, review the CP1114R ATEX reversible models instead.
• Q: What does ATEX mean on this drill?
  A: ATEX refers to equipment intended for use in potentially explosive atmospheres. This model is part of Chicago Pneumatic's ATEX drill range and should be matched to the site's classified-area requirements before use.
• Q: What chuck size does the CP1117P05 ATEX use?
  A: This drill uses a 1/2" / 13 mm keyed Jacobs industrial chuck. A keyed chuck tightens with a chuck key, helping secure larger drill bits during higher-torque drilling.
• Q: How does the CP1117P05 ATEX compare with the CP1114R05 ATEX?
  A: The CP1117P05 ATEX has a 1.01 HP / 750 W motor and 22.1 ft-lbf / 30 Nm stall torque, giving it more power and torque than the CP1114R05 ATEX. The CP1114R05 ATEX is reversible, while this CP1117P05 ATEX model is not.
• Q: What air supply does this drill require?
  A: Chicago Pneumatic lists 29 CFM / 14 l/s air consumption at load and 34 CFM / 16 l/s at free speed. Use an air system capable of maintaining 90 PSI / 6.3 bar at the tool through a minimum 0.38" / 10 mm hose.

Looking for more information about Chicago Pneumatic Drill? Click here to view the Catalog.

For help selecting the correct Chicago Pneumatic Drills for your assembly application, call (800) 608-5210 or email info@intlairtool.com