Chicago Pneumatic Direct Drive Pistol Air Screwdriver | CP2811 | 750 RPM | 8.9 (ft-lbs) Max Torque | 1/4" Hex Drive

Built for assembly fastening, fixture work, and maintenance screwdriving, the Chicago Pneumatic CP2811 Direct Drive Pistol Air Screwdriver delivers controlled pneumatic fastening in a compact pistol-grip format. Its 750 RPM free speed gives operators a slower, more controlled rundown than high-speed screwdriver models, while the 8.9 ft-lbs maximum working torque provides the tightening force needed for larger screws, bolts, and threaded fasteners within the tool's range. The 1/4" hex quick-change drive accepts standard compatible screwdriver bits and bit holders, helping operators change tooling quickly between fastening tasks.

The CP2811 uses a direct drive clutch type, meaning torque is delivered directly through the tool rather than through a shut-off clutch system. This makes it a practical choice for users who want simple trigger-controlled fastening with forward and reverse operation. The aluminum body, steel clutch housing, progressive trigger, and one-hand reverse button support frequent shop use while keeping the tool light enough for repeated fastening at benches, fixtures, and service stations.

Type: Direct Drive Pistol Air Screwdriver | Model: CP2811 | SKU: 6151630060 | Series: CP28 Series | Clutch Type: Direct Drive | Torque Control System: None | Max Torque in Forward: 8.9 ft-lbs / 12 Nm | Free Speed: 750 RPM | Output Drive Size: 1/4" | Output Drive Type: Hex | Output Retainer Type: Quick Change | Handle Type: Pistol | Starting System: Trigger | Reversible: Yes | Air Consumption at Free Speed: 11.9 CFM / 5.6 l/s | Air Inlet: 1/4" BSP | Max Dynamic Air Working Pressure: 90 PSI / 6.3 bar | Minimum Hose Diameter: 5/16" / 8 mm | Body: Aluminum | Clutch Housing: Steel | Length: 8.0" / 204 mm | Height: 6.3" / 160 mm | Width: 1.9" / 49 mm | Weight: 2.0 lb / 0.9 kg | Sound Pressure: 83 dB(A) | Sound Power: 94 dB(A) | Vibration: <2.5 m/s²

Features:

• Direct drive clutch type provides straightforward trigger-controlled fastening for applications where a shut-off clutch is not required.
• 750 RPM free speed supports controlled rundown on larger fasteners and threaded assemblies.
• 1/4" hex quick-change output drive allows fast bit changes when switching between screw sizes or fastening tasks.
• Maximum forward torque of 8.9 ft-lbs / 12 Nm gives the tool useful tightening capacity for assembly, maintenance, and repair work.
• Progressive trigger helps the operator feather speed during start-up and final seating.
• One-hand reverse button allows quick direction changes without repositioning the tool.
• Aluminum body and steel clutch housing balance low tool weight with durability for repeated use.

Applications:

• Industrial assembly - fastening screws, bolts, and threaded hardware at benches, fixtures, and light production stations.
• Maintenance and MRO - removing and installing fasteners on guards, brackets, covers, panels, and serviceable equipment parts.
• Fabrication shops - controlled fastening during small assembly builds, repair jobs, and fixture setup.
• Automotive and fleet service - interior, trim, accessory, and general shop fastening where pneumatic screwdriver control is useful.
• Garage and workshop use - repeat screwdriving tasks where a compact air screwdriver is preferred over a hand tool or cordless driver.

FAQs:

• Q: What does direct drive mean on the CP2811?
  A: Direct drive means the tool delivers torque directly through the drive system rather than using an automatic shut-off clutch. The operator controls the fastening process with the trigger and by monitoring the fastener as it seats.
• Q: Is the CP2811 a torque shut-off screwdriver?
  A: No. Manufacturer data lists the torque control system as none. If the application requires repeatable torque shut-off, choose a shut-off clutch screwdriver or a controlled assembly tool matched to the required torque range.
• Q: What bits fit the CP2811?
  A: The CP2811 uses a 1/4" hex quick-change output drive. Use compatible 1/4" hex screwdriver bits, bit holders, or adapters that match the fastener and are suitable for pneumatic screwdriver use.
• Q: What air supply does this screwdriver require?
  A: Chicago Pneumatic specifies 90 PSI / 6.3 bar maximum dynamic working pressure, a 1/4" BSP air inlet, and a minimum 5/16" / 8 mm hose diameter for a 16 ft / 5 m hose length.
• Q: When should I choose the CP2811 instead of a faster screwdriver?
  A: Choose the CP2811 when you need more torque and slower rundown speed for controlled fastening. Faster screwdriver models are better for small screws and high-cycle light assembly work, while the CP2811 is better suited to higher-torque fastening within its rated range.

Looking for more information about Chicago Pneumatic Screwdriver? Click here to view the Catalog.

For help selecting the correct Chicago Pneumatic Screwdrivers for your assembly application, call (800) 608-5210 or email info@intlairtool.com