When small fasteners are positioned beyond the reach of a standard ratchet, the AIRCAT 808-15-25-A 1/4" Long Reach Composite Ratchet gives technicians extended access for light fastening work in tight or recessed service areas. Its 35 ft-lbs maximum torque supports small fastener removal and installation, while the 200 RPM free speed helps run hardware down faster than hand ratcheting. The 1/4" square drive fits compatible 1/4" drive sockets, making this long reach ratchet useful around brackets, covers, panels, clamps, engine-bay hardware, and compact equipment service points.
At 15.30" long and 3.10 lbs., the 808-15-25-A provides added reach without moving into a larger socket drive size. The extended drive shaft helps place the ratchet head on hard-to-reach fasteners, while the unique head anti-spread construction supports durability and consistent performance over the tool life. A low-profile forward/reverse shift knob makes direction changes easier in restricted spaces, and the ergonomic hex nut and composite handle help the tool fit comfortably in the hand while isolating against cold and absorbing vibration.
Type: Long Reach Composite Ratchet | Model: 808-15-25-A | Drive Size: 1/4" Square Drive | Free Speed: 200 RPM | Bolt Capacity: 3/8" | Max Torque: 35 ft-lbs @ 90 PSI | Weight: 3.10 lbs. | Length: 15.30" | Air Consumption: 4.0 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT
Features:
- Provides 35 ft-lbs of maximum torque for light-duty fastener removal and installation.
- 200 RPM free speed helps speed up run-down compared with manual ratcheting.
- 1/4" square drive fits compatible 1/4" drive sockets for small hardware and compact service tasks.
- Extended drive shaft provides access to hard-to-reach fasteners behind brackets, covers, panels, and surrounding components.
- Unique head anti-spread construction provides more durability and consistent performance over the tool life.
- Low-profile and large forward/reverse shift knob makes changing direction easier during close-clearance work.
- Ergonomic hex nut and composite handle comfortably fit the hand while helping isolate against cold and absorb vibration.
- 15.30" long reach body helps technicians access recessed fasteners that may be difficult to reach with a standard-length ratchet.
Applications:
- Automotive engine-bay service: Reaching small fasteners behind brackets, covers, clamps, sensors, accessory hardware, and underhood components.
- Interior and trim work: Removing and installing small panel hardware, light brackets, retainers, and fasteners where added reach helps tool placement.
- Equipment maintenance: Working on guards, access covers, compact service panels, and small mounting hardware that use 1/4" drive sockets.
- Light assembly and repair: Speeding up repetitive small-fastener run-down before final hand feel or torque verification.
- MRO and shop service: Handling small hardware on fixtures, housings, panels, brackets, and mechanical assemblies where a standard ratchet may not reach comfortably.
FAQs:
- Q: What is the AIRCAT 808-15-25-A best used for?
A: The AIRCAT 808-15-25-A is best used for small-fastener work where a 1/4" drive ratchet needs extra reach. Common uses include automotive repair, equipment service, access cover removal, light assembly, and general MRO work in recessed or obstructed areas. - Q: What is the benefit of the 15.30" long reach design?
A: The longer body and extended drive shaft help position the ratchet head on fasteners that are difficult to access with a standard-length ratchet. This is useful behind brackets, panels, guards, covers, and other surrounding components. - Q: How is the 808-15-25-A different from the AIRCAT 800?
A: The AIRCAT 800 is a standard 1/4" composite ratchet listed at 8.50" long and 320 RPM. The AIRCAT 808-15-25-A is a 1/4" long reach composite ratchet listed at 15.30" long and 200 RPM for applications where reach matters more than compact length. - Q: What air hose size should I use with the AIRCAT 808-15-25-A?
A: AIRCAT lists a 3/8" recommended hose size and a 1/4" NPT air inlet for this model. Using clean, regulated air helps the tool deliver proper speed and torque. - Q: Can this ratchet replace a torque wrench?
A: No. This pneumatic ratchet helps remove and run down small fasteners, but final torque should be checked with a calibrated torque wrench whenever a specific torque value is required.
| SKU | Free Speed (RPM) |
Bolt Capacity (in.) |
Square Drive (in.) |
Max. Torque (ft-lb) @90 psi |
Weight (lbs.) |
Length (in) |
Air Cons. (CFM) |
Rec. Hose Size (in.) |
Air Inlet NPT (in.) |
|---|---|---|---|---|---|---|---|---|---|
| 807-25 | 300 | 3/8 | 1/4 | 35 | 1.10 | 5.40 | 3.0 | 3/8 | 1/4 |
| 800 | 320 | 3/8 | 1/4 | 35 | 1.60 | 8.50 | 4.0 | 3/8 | 1/4 |
| 811 | 240 | 3/8 | 1/4 | 35 | 1.83 | 9.69 | 4.0 | 3/8 | 1/4 |
| 808-15-25-A | 200 | 3/8 | 1/4 | 35 | 3.10 | 15.30 | 4.0 | 3/8 | 1/4 |
Looking for more information about the Aircat Pneumatic Tools Impact Wrenches? For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
