When small fasteners are tucked into tight service areas, the AIRCAT 807-25 1/4" Mini Palm Ratchet gives technicians a compact pneumatic ratchet for controlled run-down and removal work. Its 35 ft-lbs maximum torque supports light-duty fastening tasks, while the 300 RPM free speed helps run fasteners down faster than hand ratcheting. The 1/4" square drive fits compatible 1/4" drive sockets, making this palm ratchet a useful choice for small hardware around radiators, engine compartments, interior panels, light brackets, and other confined spaces.
At only 5.40" long and 1.10 lbs., the 807-25 is built for access where a longer air ratchet may be difficult to position. The ergonomic composite over-mold grip helps improve comfort during repeated use, while the palm-style body keeps the tool compact for close-quarter work. With 3.0 CFM air consumption, a 3/8" recommended hose size, and a 1/4" NPT air inlet, this mini ratchet is easy to integrate into common shop air setups for small-fastener service.
Type: Mini Palm Ratchet | Model: 807-25 | Drive Size: 1/4" Square Drive | Free Speed: 300 RPM | Bolt Capacity: 3/8" | Max Torque: 35 ft-lbs @ 90 PSI | Weight: 1.10 lbs. | Length: 5.40" | Air Consumption: 3.0 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT
Features:
- Provides 35 ft-lbs of maximum torque for small fastener removal and installation.
- 300 RPM free speed helps speed up run-down compared with manual ratcheting.
- 1/4" square drive fits compatible 1/4" drive sockets for light-duty service work.
- Ergonomic composite over-mold grip provides comfort during repeated small-fastener tasks.
- Compact 5.40" length helps the tool fit around radiators and other confined work areas.
- Light 1.10 lb. tool weight helps reduce hand fatigue during close-quarter use.
- 3.0 CFM air consumption supports use with common shop air systems when supplied with clean, regulated air.
Applications:
- Automotive engine bays: Running down and removing small fasteners around radiators, brackets, covers, clamps, and tight accessory areas.
- Interior and trim work: Servicing light hardware where a compact 1/4" drive ratchet helps reduce tool bulk around panels and close-clearance locations.
- Light assembly work: Speeding up repetitive small-fastener installation before final hand feel or torque verification.
- Equipment service: Working on guards, light covers, access panels, brackets, and compact service points that use smaller fasteners.
- MRO and shop maintenance: Handling small hardware on fixtures, housings, panels, and light mechanical assemblies in confined areas.
FAQs:
- Q: What is the AIRCAT 807-25 best used for?
A: The AIRCAT 807-25 is best used for small-fastener work in confined spaces. Common uses include work around radiators, engine compartments, access panels, light brackets, covers, and other areas where a longer ratchet may be difficult to position. - Q: Is this a 1/4" drive or 3/8" drive ratchet?
A: The 807-25 has a 1/4" square drive. AIRCAT lists a separate 807 model as the related 3/8" mini palm ratchet. - Q: What does 300 RPM mean on this palm ratchet?
A: RPM is the free-speed rating of the tool. On this model, 300 RPM helps run fasteners down quickly, but final tightening should still be controlled to match the fastener and application. - Q: What air hose size should I use with the AIRCAT 807-25?
A: AIRCAT lists a 3/8" recommended hose size and a 1/4" NPT air inlet for this model. Using clean, regulated air helps the tool deliver proper speed and torque. - Q: Can this ratchet replace a torque wrench?
A: No. This pneumatic ratchet helps remove and run down small fasteners, but final torque should be verified with a calibrated torque wrench when a specific torque value is required.
| SKU | Free Speed (RPM) |
Bolt Capacity (in.) |
Square Drive (in.) |
Max. Torque (ft-lb) @90 psi |
Weight (lbs.) |
Length (in) |
Air Cons. (CFM) |
Rec. Hose Size (in.) |
Air Inlet NPT (in.) |
|---|---|---|---|---|---|---|---|---|---|
| 807-25 | 300 | 3/8 | 1/4 | 35 | 1.10 | 5.40 | 3.0 | 3/8 | 1/4 |
| 800 | 320 | 3/8 | 1/4 | 35 | 1.60 | 8.50 | 4.0 | 3/8 | 1/4 |
| 811 | 240 | 3/8 | 1/4 | 35 | 1.83 | 9.69 | 4.0 | 3/8 | 1/4 |
| 808-15-25-A | 200 | 3/8 | 1/4 | 35 | 3.10 | 15.30 | 4.0 | 3/8 | 1/4 |
Looking for more information about the Aircat Pneumatic Tools Impact Wrenches? For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
