When technicians need high ratchet torque and extra reach in a 1/2" drive format, the AIRCAT 805-HT-22-5 1/2" High Torque Long Reach Ratchet gives automotive, equipment, assembly, and MRO teams a long-body pneumatic tool for recessed fastener service. Its 130 ft-lbs maximum torque supports stubborn small-to-medium fastener removal and installation, while the 200 RPM free speed provides controlled run-down for higher-load ratchet applications. The 1/2" square drive fits compatible 1/2" drive sockets for brackets, covers, guards, mounts, panels, service hardware, and repair fasteners within the tools torque range.
At 21.60" long and 5.15 lbs., the 805-HT-22-5 is built for reach where a standard-length ratchet may not place the head far enough into the work area. The long reach body helps technicians access fasteners behind brackets, guards, panels, covers, and surrounding components without changing to a lower-torque tool. With 4.0 CFM air consumption, a 3/8" recommended hose size, and a 1/4" NPT air inlet, this ratchet fits common shop air setups when supplied with clean, regulated air.
Type: High Torque Long Reach Ratchet | Model: 805-HT-22-5 | Drive Size: 1/2" Square Drive | Free Speed: 200 RPM | Bolt Capacity: 5/8" | Max Torque: 130 ft-lbs @ 90 PSI | Weight: 5.15 lbs. | Length: 21.60" | Air Consumption: 4.0 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT
Features:
- Provides 130 ft-lbs of maximum torque for higher-output 1/2" drive ratchet applications.
- 200 RPM free speed supports controlled run-down on small-to-medium fasteners.
- 1/2" square drive fits compatible 1/2" drive sockets for common service, repair, and maintenance work.
- 21.60" long reach body helps technicians access recessed fasteners that may be difficult to reach with a standard-length ratchet.
- Long body format helps reach fasteners behind brackets, panels, covers, guards, and surrounding components.
- 5/8" bolt capacity supports larger ratchet-service fasteners within the tools rated range.
- 3/8" recommended air hose and 1/4" NPT air inlet support use with common shop air systems.
- Also available in a 3/8" drive version as model 805-HT-22.
Applications:
- Automotive repair: Reaching fasteners behind brackets, covers, clamps, sensors, accessory hardware, and other underhood components where added reach and 1/2" drive sockets are useful.
- Equipment maintenance: Working on guards, access covers, compact service panels, light mounts, housings, and repair hardware positioned away from the operator.
- MRO and shop service: Removing and installing hardware on fixtures, panels, brackets, covers, and light mechanical assemblies where a shorter ratchet may not reach comfortably.
- Assembly and repair benches: Running down small-to-medium fasteners before final hand feel or torque verification where a specified torque value is required.
- Confined or recessed fastener service: Supporting jobs where technicians need both high ratchet torque and extended reach without switching to a full-size impact wrench.
FAQs:
- Q: What is the AIRCAT 805-HT-22-5 best used for?
A: The AIRCAT 805-HT-22-5 is best used for 1/2" drive fastening where technicians need high ratchet torque and extended reach. Common uses include automotive repair, equipment maintenance, access panel work, light assembly, and general MRO tasks. - Q: How is the AIRCAT 805-HT-22-5 different from the AIRCAT 805-HT-5?
A: The AIRCAT 805-HT-5 is the standard-length 1/2" high torque ratchet listed at 12.45" long. The AIRCAT 805-HT-22-5 is the long reach version listed at 21.60" long, giving technicians added access while keeping the 1/2" square drive and 130 ft-lbs maximum torque rating. - Q: How is the 805-HT-22-5 different from the 805-HT-22?
A: The 805-HT-22-5 has a 1/2" square drive, while the 805-HT-22 has a 3/8" square drive. Both are long reach high torque ratchets listed with 130 ft-lbs maximum torque and 200 RPM free speed. - Q: What air hose size should I use with the AIRCAT 805-HT-22-5?
A: AIRCAT lists a 3/8" recommended hose size and a 1/4" NPT air inlet for this model. Using clean, regulated air helps the tool deliver proper speed, torque, and service life. - Q: Can this long reach ratchet replace a torque wrench?
A: No. The 805-HT-22-5 helps remove and run down fasteners quickly, but final torque should be checked with a calibrated torque wrench whenever a specific torque value is required.
| SKU | Free Speed (RPM) |
Bolt Capacity (in.) |
Square Drive (in.) |
Max. Torque (ft-lb) @90 psi |
Weight (lbs.) |
Length (in) |
Air Cons. (CFM) |
Rec. Hose Size (in.) |
Air Inlet NPT (in.) |
|---|---|---|---|---|---|---|---|---|---|
| 802-5 | 280 | 3/8 | 1/2 | 70 | 2.75 | 10.50 | 4.0 | 3/8 | 1/4 |
| 805-HT-5 | 180 | 5/8 | 1/2 | 130 | 3.30 | 12.45 | 6.0 | 3/8 | 1/4 |
| 805-HT-22-5 | 200 | 5/8 | 1/2 | 130 | 5.15 | 21.60 | 4.0 | 3/8 | 1/4 |
Looking for more information about the Aircat Pneumatic Tools Impact Wrenches? For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
