Aircat Pneumatic Tools 802-5 Composite Ratchet | 70 (ft-lbs) Max Torque | 280 RPM | 1/2" Square Drive

When technicians prefer a 1/2" drive ratchet for small-to-medium fastener work, the AIRCAT 802-5 1/2" Composite Ratchet provides pneumatic run-down speed in a manageable composite-body tool. Its 70 ft-lbs maximum torque supports fastener removal and installation on brackets, covers, guards, panels, clamps, service hardware, and light mounts, while the 280 RPM free speed helps speed up repetitive work compared with hand ratcheting. The 1/2" square drive fits compatible 1/2" drive sockets where that socket size is preferred for shop, automotive, equipment, assembly, and MRO tasks.

The 802-5 uses a durable twin pawl mechanism (a ratchet design that uses two pawls to help distribute load and improve drive engagement), giving technicians added ratchet strength for 1/2" drive service work. At 2.75 lbs. and 10.50" long, it matches the same general size as the 3/8" drive AIRCAT 802 while offering a larger square drive. AIRCAT’s patented quiet tuned exhaust reduces sound output to 82 dBA, and the feather trigger helps the operator control speed during fastener start, run-down, and removal.

Type: Composite Ratchet | Model: 802-5 | Drive Size: 1/2" Square Drive | Free Speed: 280 RPM | Bolt Capacity: 3/8" | Max Torque: 70 ft-lbs @ 90 PSI | Weight: 2.75 lbs. | Length: 10.50" | Air Consumption: 4.0 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT | Noise Level: 82 dBA

Features:

• Provides 70 ft-lbs of maximum torque for small-to-medium fastener removal and installation.
• 280 RPM free speed helps speed up fastener run-down compared with manual ratcheting.
• 1/2" square drive fits compatible 1/2" drive sockets for common service, repair, and maintenance work.
• Durable twin pawl mechanism supports stronger drive engagement during repeated ratchet use.
• Patented quiet tuned exhaust reduces operating noise to 82 dBA.
• Feather trigger gives the operator control over speed during fastener start, run-down, and removal.
• Ergonomically designed housing supports comfortable handling during automotive, equipment, assembly, and MRO applications.
• Trigger lever design supports comfortable operation during repeated fastening tasks.

Applications:

• Automotive repair: Removing and installing brackets, covers, clamps, accessory hardware, service fasteners, and light underhood components within the tool’s torque range.
• Equipment maintenance: Working on guards, access panels, small mounts, housings, covers, and repair hardware where 1/2" drive sockets are used.
• Body and interior service: Speeding up removal and installation of panel hardware, retainers, trim-area fasteners, and light brackets.
• Light assembly work: Running down repetitive fasteners before final hand feel or torque verification where a specified torque value is required.
• MRO and shop maintenance: Handling fasteners on fixtures, panels, brackets, housings, and light mechanical assemblies in general maintenance environments.

FAQs:

• Q: What is the AIRCAT 802-5 best used for?
  A: The AIRCAT 802-5 is best used for 1/2" drive ratchet work where technicians need 70 ft-lbs of torque and controlled pneumatic run-down. Common uses include automotive repair, equipment service, light assembly, access panel work, and general MRO tasks.
• Q: How is the AIRCAT 802-5 different from the AIRCAT 802?
  A: The AIRCAT 802-5 has a 1/2" square drive, while the AIRCAT 802 has a 3/8" square drive. Both models are listed with 70 ft-lbs maximum torque, 280 RPM free speed, 2.75 lb. weight, and 10.50" length.
• Q: What is a twin pawl mechanism?
  A: A twin pawl mechanism uses two pawls to engage the ratchet gear, helping distribute load and support stronger drive engagement than a single pawl layout.
• Q: What air hose size should I use with the AIRCAT 802-5?
  A: AIRCAT lists a 3/8" recommended hose size and a 1/4" NPT air inlet for this model. Using clean, regulated air helps the tool deliver proper speed, torque, and service life.
• Q: Can this ratchet replace a torque wrench?
  A: No. The 802-5 helps remove and run down fasteners quickly, but final torque should be checked with a calibrated torque wrench whenever a specific torque value is required.

Looking for more information about the Aircat Pneumatic Tools Impact Wrenches? Click here to view the Catalog.

For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com