Aircat Pneumatic Tools 6295 115° Angle Die Grinder With Spindle Lock | 0.6 HP | 18000 RPM | 1/4" Collet Size | Rear Exhaust

When tight-access grinding, deburring, and finishing work needs a head angle between a straight grinder and a conventional 90° angle grinder, the AIRCAT 6295 115° Angle Die Grinder with Spindle Lock gives technicians a compact pneumatic tool for controlled material removal around brackets, housings, panels, castings, fixtures, and service cavities. Its 0.6 HP motor and 18,000 RPM free speed support work with compatible mounted stones, carbide burrs, sanding accessories, and other properly rated rotary accessories. The 1/4" collet size accepts matching 1/4" shank accessories for edge cleanup, burr removal, gasket-surface preparation, weld-detail blending, smoothing, and general shop finishing.

The 115° head angle helps position the accessory in areas where a straight die grinder may not line up cleanly and a 90° angle grinder may feel too tight or upright. At 1.65 lbs. and 7.80" long, the 6295 offers a manageable body size for close-quarter work, while the spindle lock feature helps make accessory changes easier. AIRCAT also lists this model with an ergonomic composite over-mold grip, a speed control switch located at the top of the tool for added control, bevel gearing, and rear exhaust to direct air away from the work area.

Type: 115° Angle Die Grinder with Spindle Lock | Model: 6295 | Motor: 0.6 HP | Free Speed: 18,000 RPM | Collet Size: 1/4" | Gears: Bevel | Exhaust: Rear | Weight: 1.65 lbs. | Length: 7.80" | Air Consumption: 6.0 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT

Features:

• 0.6 HP motor and 18,000 RPM free speed support grinding, deburring, smoothing, and finishing work.
• 1/4" collet accepts compatible 1/4" shank mounted stones, carbide burrs, sanding accessories, and rotary accessories when accessory speed ratings match the tool.
• 115° angle head helps improve access and tool positioning in tight or awkward work areas.
• Spindle lock feature helps make accessory changes easier during shop, repair, and maintenance work.
• Speed control switch located at the top of the tool gives the operator added control during surface blending and material cleanup.
• Ergonomic composite over-mold grip provides comfort during repeated grinding and finishing tasks.
• Bevel gearing transfers power through the angled head for compact die grinder applications.
• Rear exhaust directs air away from the immediate work point to help keep exhaust flow off the grinding area.

Applications:

• Automotive repair: Cleaning edges, removing burrs, preparing gasket surfaces, and performing small-area finishing around engine, brake, exhaust, and body components.
• Metal fabrication: Blending small weld details, smoothing cut edges, cleaning holes, and touching up metal features after cutting, drilling, or machining.
• Manufacturing maintenance: Finishing fixtures, housings, brackets, panels, light assemblies, and production support components with properly rated 1/4" shank accessories.
• Equipment service: Working around mounts, guards, covers, frames, service cavities, and compact repair areas where a 115° head angle improves access.
• MRO and shop finishing: Supporting controlled burr removal, surface preparation, edge conditioning, and detail cleanup in confined work areas.

FAQs:

• Q: What is the AIRCAT 6295 best used for?
  A: The AIRCAT 6295 is best used for grinding, deburring, smoothing, edge cleanup, and finishing where the 115° angle head helps reach the work surface. Common uses include automotive repair, fabrication cleanup, manufacturing work, equipment service, and general MRO finishing.
• Q: What is the benefit of a 115° angle die grinder?
  A: A 115° angle die grinder places the working end at a shallower angle than a conventional 90° angle grinder. This can help the operator reach into spaces where a straight grinder does not align well and a standard right-angle tool may feel too steep.
• Q: What does the spindle lock do?
  A: The spindle lock helps hold the spindle during accessory changes, making it easier to change compatible mounted stones, carbide burrs, sanding accessories, and other 1/4" shank rotary accessories.
• Q: What accessories can I use with this die grinder?
  A: Use compatible mounted stones, carbide burrs, sanding accessories, and rotary accessories with the correct 1/4" shank size and a speed rating suitable for 18,000 RPM operation. Always follow the accessory manufacturer's safety and speed instructions.
• Q: What air hose size should I use with the AIRCAT 6295?
  A: AIRCAT lists a 3/8" recommended hose size and a 1/4" NPT air inlet for this model. Using clean, regulated air helps the grinder maintain proper speed, performance, and service life.
• Q: Should I disconnect the air supply before changing accessories?
  A: Yes. Disconnect the air supply and air hose before changing mounted stones, carbide burrs, sanding accessories, collets, or other accessories. This helps prevent accidental starts while the tool is being adjusted.

Looking for more information about the Aircat Pneumatic Angle Die Grinders? Click here to view the Catalog.

For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com