Aircat Pneumatic Tools 6275-A Inside Cut-Off Tool With Spindle Lock | 4 HP | 14000 RPM | 4" Wheel Size | Rear Exhaust

When cut-off work requires access into inside corners, recessed repair areas, and tight metal-cutting locations, the AIRCAT 6275-A 4" Inside Cut-Off Tool with Spindle Lock gives technicians a compact pneumatic cutter for sheet metal, rolled steel, brackets, clamps, fasteners, panels, and repair hardware. Its 1.0 HP motor and 14,000 RPM free speed support use with compatible properly rated 4" cut-off wheels. The close-coupled wheel layout helps the operator reach into inside corners where a conventional cut-off tool may not position the wheel effectively.

AIRCAT lists the 6275-A with a 3/4" rolled steel / 18 gauge cutting capacity, giving automotive, fabrication, body shop, equipment service, and MRO teams a controlled option for metal cutting and repair preparation. At 3.75 lbs. and 15.50" long, this inside cut-off tool provides added reach for corner and recessed-area cutting tasks. AIRCAT also lists a compact tapered gear housing, close-coupled grinding wheel, spindle lock for easier wheel changes, and an 11-position rotational guard to help the operator adjust the guard position for access and protection.

Type: Inside Cut-Off Tool with Spindle Lock | Model: 6275-A | Motor: 1.0 HP | Free Speed: 14,000 RPM | Wheel Size: 4" | Wheel Compatibility: 4" x 1/16" x 3/8" and 4" x 1/8" x 3/8" Cut-Off Wheels | Gears: Direct Drive | Cutting Capacity: 3/4" Rolled Steel / 18 Gauge | Exhaust: Rear | Weight: 3.75 lbs. | Length: 15.50" | Air Consumption: 6.0 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT

Features:

• 1.0 HP motor and 14,000 RPM free speed support compact metal cutting, repair preparation, and inside-corner cut-off work.
• 4" wheel size provides added cutting reach compared with smaller 3" cut-off tools.
• Compact tapered gear housing with close-coupled wheel layout helps reach inside corners and recessed cutting areas.
• Reaches inside corners as small as 30° with a 4" wheel, according to AIRCAT source data.
• Spindle lock helps make wheel changes easier during shop, repair, fabrication, and maintenance work.
• 11-position rotational guard allows the guard position to be adjusted for access and operator protection.
• Superior steel grade internal gears support longer service life during repeated cutting applications.
• Direct drive design provides straightforward power transfer for inside cut-off tool operation.
• Rear exhaust directs air away from the immediate cutting area to help keep exhaust flow off the work surface.

Applications:

• Automotive repair: Cutting brackets, clamps, exhaust hardware, fasteners, body repair sections, and tight-access metal areas where an inside cut-off tool improves wheel placement.
• Body shop work: Making controlled cuts in compatible sheet metal before fitting, sanding, grinding, welding, or replacement work.
• Fabrication tasks: Cutting light metal stock, trimming small sections, and reaching inside corners during repair or preparation work.
• Equipment service: Removing damaged guards, covers, mounts, clamps, brackets, and compact service hardware during repair and maintenance work.
• MRO and shop maintenance: Supporting cut-off work on fixtures, housings, panels, repair parts, and general maintenance components where corner access is important.

FAQs:

• Q: What is the AIRCAT 6275-A best used for?
  A: The AIRCAT 6275-A is best used for 4" cut-off work where the operator needs to reach inside corners, recessed repair areas, and tight metal-cutting locations. Common uses include automotive repair, body shop cutting, fabrication cleanup, equipment service, and MRO cutting tasks.
• Q: What does "inside cut-off tool" mean?
  A: An inside cut-off tool is shaped to help position the wheel into inside corners and confined areas. On the 6275-A, AIRCAT lists a compact tapered gear housing with a close-coupled wheel layout that reaches inside corners as small as 30° with a 4" wheel.
• Q: What does the spindle lock do?
  A: The spindle lock helps hold the spindle during wheel changes, making it easier to remove and install compatible 4" cut-off wheels.
• Q: What wheels can I use with this cut-off tool?
  A: AIRCAT lists 4" cut-off wheel sizes of 4" x 1/16" x 3/8" and 4" x 1/8" x 3/8". Always use compatible properly rated wheels that match the tool"s 14,000 RPM free speed and follow the wheel manufacturer"s mounting, speed, and safety instructions.
• Q: What cutting capacity does AIRCAT list for the 6275-A?
  A: AIRCAT lists the 6275-A with a cutting capacity of 3/4" rolled steel / 18 gauge. Actual cutting performance depends on the wheel, material, air supply, operator technique, and tool condition.
• Q: What air hose size should I use with the AIRCAT 6275-A?
  A: AIRCAT lists a 3/8" recommended hose size and a 1/4" NPT air inlet for this model. Clean, regulated air helps the cut-off tool maintain proper speed, cutting performance, and service life.
• Q: Should I disconnect the air supply before changing wheels or adjusting the guard?
  A: Yes. Disconnect the air supply and air hose before changing cut-off wheels, adjusting the guard, or servicing the tool. This helps prevent accidental starts while the tool is being adjusted.

Looking for more information about the Aircat Pneumatic Cut-Off Tools? Click here to view the Catalog.

For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com