Aircat Pneumatic Tools 6250 Compact Composite Angle Die Grinder | 0.3 HP | 18000 RPM | 1/4" Collet Size | Rear Exhaust

When tight-access grinding, deburring, and finishing work requires an angled head instead of a straight-body grinder, the AIRCAT 6250 1/4" Compact Composite Angle Die Grinder gives technicians a lightweight pneumatic tool for controlled material removal in confined areas. Its 0.3 HP motor and 18,000 RPM free speed support work with compatible mounted stones, carbide burrs, and properly rated rotary accessories. The 1/4" collet size accepts matching 1/4" shank accessories for edge cleanup, burr removal, gasket-surface preparation, casting cleanup, weld-detail blending, and small-area finishing.

At 1.00 lb. and 5.00" long, the 6250 is built for maneuverability where a longer straight die grinder may be harder to control. The angle-head layout helps position the accessory around brackets, panels, housings, service cavities, and close-clearance repair areas. AIRCAT lists this model with spiral bevel gearing, rear exhaust, low vibration at 2.5 m/sec², and quiet operation at 82 dBA. The variable speed trigger with safety lock-off helps the operator control the tool while reducing the chance of accidental starts during handling and setup.

Type: Compact Composite Angle Die Grinder | Model: 6250 | Motor: 0.3 HP | Free Speed: 18,000 RPM | Collet Size: 1/4" | Gears: Spiral Bevel | Exhaust: Rear | Weight: 1.00 lb. | Length: 5.00" | Air Consumption: 4.0 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT | Noise Level: 82 dBA | Vibration: 2.5 m/sec²

Features:

• 0.3 HP motor and 18,000 RPM free speed support compact grinding, deburring, edge cleanup, and finishing work.
• 1/4" collet accepts compatible 1/4" shank mounted stones, carbide burrs, and rotary accessories when accessory speed ratings match the tool.
• Angle-head design helps technicians reach tight spaces where a straight die grinder may not align comfortably with the work surface.
• Spiral bevel gearing supports right-angle power transfer for compact die grinder applications.
• Low weight 5.00" body improves maneuverability around brackets, housings, panels, guards, and repair cavities.
• Patented quiet tuned exhaust reduces operating noise to 82 dBA.
• Variable speed trigger with safety lock-off helps improve control and reduce accidental starts.
• Ergonomically designed composite over-mold housing supports comfort during repeated shop use.
• Unique side trigger design helps keep the operator's finger elevated away from the work surface.

Applications:

• Automotive repair: Cleaning edges, removing burrs, preparing gasket surfaces, and performing small-area finishing around engine, brake, exhaust, and body components.
• Metal fabrication: Deburring cut edges, blending small weld details, cleaning drilled holes, and touching up metal features after cutting or machining.
• Equipment service: Working around brackets, mounts, covers, guards, housings, and compact repair areas where angled access is helpful.
• Manufacturing maintenance: Finishing fixtures, panels, service parts, light assemblies, and production support components with properly rated 1/4" shank accessories.
• MRO and shop finishing: Supporting controlled burr removal, surface preparation, and edge conditioning in confined or close-clearance work areas.

FAQs:

• Q: What is the AIRCAT 6250 best used for?
  A: The AIRCAT 6250 is best used for compact grinding, deburring, edge cleanup, and finishing work where a right-angle grinder head provides better access than a straight die grinder. Common uses include automotive repair, fabrication cleanup, equipment service, manufacturing maintenance, and MRO finishing.
• Q: How is an angle die grinder different from a straight die grinder?
  A: An angle die grinder places the collet at a right angle to the tool body, helping the operator reach surfaces where a straight tool may not align well. A straight die grinder is often preferred for direct in-line access, while an angle grinder is helpful around panels, brackets, housings, and tight service areas.
• Q: What accessories can I use with this die grinder?
  A: Use compatible mounted stones, carbide burrs, and rotary accessories with the correct 1/4" shank size and a speed rating suitable for 18,000 RPM operation. Always follow the accessory manufacturer's safety and speed instructions.
• Q: What air hose size should I use with the AIRCAT 6250?
  A: AIRCAT lists a 3/8" recommended hose size and a 1/4" NPT air inlet for this model. Using clean, regulated air helps the grinder maintain proper speed, performance, and service life.
• Q: Should I disconnect the air supply before changing accessories?
  A: Yes. Disconnect the air supply and air hose before changing mounted stones, carbide burrs, collets, or other accessories. This helps prevent accidental starts while the tool is being adjusted.

Looking for more information about the Aircat Pneumatic Angle Die Grinders? Click here to view the Catalog.

For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com