Aircat Pneumatic Tools 1059-VXL Vibrotherm Drive Composite Compact Impact Wrench | 550 (ft-lbs) Max Torque | 9000 RPM | 3/8" Square Drive

When a compact impact wrench needs more control over vibration without giving up torque, the AIRCAT 1059-VXL 3/8" VIBROTHERM DRIVE Composite Compact Impact Wrench gives technicians a short-body pneumatic tool for tight automotive, fleet, and maintenance work. Its 550 ft-lbs maximum torque supports stubborn fastener removal in restricted spaces, while 750 ft-lbs of loosening torque helps break loose tight or corroded bolts before run-down. The 3/8" square drive fits common 3/8" impact sockets, and the 9,000 RPM free speed keeps repetitive fastening work moving efficiently.

At 4.40" long and 2.80 lbs., the 1059-VXL is sized for engine bays, suspension areas, underbody hardware, and compact equipment where larger impact wrenches are difficult to position. The VIBROTHERM DRIVE® mechanism (AIRCAT’s patented impact design built to reduce vibration while maintaining impact power) lowers vibration levels by 30%–40% and increases mechanism life by 50%. AIRCAT's patented muffler system keeps noise low, while the composite housing and molded grip support better handling during repeated service work.

Type: VIBROTHERM DRIVE Composite Compact Impact Wrench | Model: 1059-VXL | Drive Size: 3/8" Square Drive | Free Speed: 9,000 RPM | Bolt Capacity: 9/16" | Impacts Per Minute: 1,700 IPM | Max Torque: 550 ft-lbs 90 PSI | Loosening Torque: 750 ft-lbs | Weight: 2.80 lbs. | Length: 4.40" | Air Consumption: 8 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT

Features:

• Provides 550 ft-lbs of maximum torque and 750 ft-lbs of loosening torque for compact fastening and removal work.
• VIBROTHERM DRIVE impact wrench mechanism incorporates AIRCAT's patented impact design.
• Patented VIBROTHERM DRIVE hammer mechanism reduces vibration levels by 30% - 40% and increases the life of the tool by 50%.
• Patented AIRCAT muffler system helps provide low noise output during pneumatic impact operation.
• Composite housing keeps the tool weight to 2.80 lbs. for improved handling in repeated service tasks.
• Patented grip design supports controlled handling when working in compact or awkward tool positions.
• Triple injection molding process supports AIRCAT's distinctive composite body design.

Applications:

• Automotive repair: Removing and installing fasteners around engines, brackets, suspension components, brake hardware, and underbody areas where clearance is limited.
• Fleet maintenance: Servicing compact chassis fasteners, panels, guards, mounts, and smaller shop hardware on vans, trucks, trailers, and service equipment.
• Body shops and collision repair: Handling bumper brackets, panel hardware, support brackets, and tight-access fasteners where a shorter impact body improves control.
• Industrial maintenance and MRO: Running down and removing bolts on machinery covers, fixtures, equipment frames, access panels, and repair benches.
• DIY garage and restoration work: Useful for experienced home mechanics working on compact automotive projects, rusted hardware, and tight repair areas with a properly sized air supply.

FAQs:

• Q: What is VIBROTHERM DRIVE on the AIRCAT 1059-VXL?
  A: VIBROTHERM DRIVE® is AIRCAT's patented impact mechanism design for this compact impact wrench. It is intended to reduce vibration levels by 30%-40% while increasing the life of the mechanism by 50%.
• Q: How is the 1059-VXL different from a standard compact impact wrench?
  A: The key difference is the VIBROTHERM DRIVE mechanism, which focuses on reducing vibration while maintaining compact impact power. This makes the 1059-VXL a strong choice when technicians want 3/8" drive access, 550 ft-lbs maximum torque, and lower vibration in the same tool category.
• Q: What air hose size should I use with this impact wrench?
  A: AIRCAT lists a 3/8" recommended hose size for the 1059-VXL. Using the recommended hose helps maintain air volume so the tool can deliver proper speed and torque under load.
• Q: Can I use chrome hand sockets with this tool?
  A: No. Use impact-rated 3/8" drive sockets only. Chrome hand sockets are not made for repeated impact loads and can crack or fail when used with pneumatic impact tools.
• Q: Is this tool suitable for lug nuts?
  A: The 1059-VXL may remove some passenger-vehicle lug nuts when the fastener condition and torque requirement are within the tool's capability. For frequent tire service, larger vehicles, or heavily corroded wheel hardware, a 1/2" drive impact wrench is usually the better primary tool. Final tightening should always be checked with a calibrated torque wrench.

Looking for more information about the Aircat Pneumatic Impact Wrenches? Click here to view the Catalog.

For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com