Cleco mPro400GCD-SH Hybrid Secondary Global Controller | 400 Series

Built for Cleco fastening systems that need secondary controller expansion, the Cleco mPro400GCD-SH Hybrid Secondary Global Controller supports production stations using NeoTek 30/50/70 Series, 18/48/17/47/67 Series, and Conventional BB Spindles. As part of the 400 Series, this controller helps assembly teams manage corded and cordless Cleco tools in torque-controlled fastening environments where repeatability, station integration, and tightening data access are critical.

The mPro400GCD-SH is a transducer controlled controller, meaning it works with tool systems that measure fastening output through a sensing device instead of relying only on time or motor behavior. It can control up to 16 corded or cordless tools, making it useful for multi-tool cells, line expansions, and fastening stations that need a secondary controller tied into a larger Cleco mPro400GCD setup. The interactive screen, CompactFlash storage, remote programming capability, and Industry 4.0-ready architecture help production teams review tightening data, adjust parameters, and support connected manufacturing requirements.

Type: Hybrid Secondary Global Controller | Series: 400 Series | Model: mPro400GCD-SH | Control Type: Transducer Controlled | Tool Capacity: Up to 16 corded or cordless tools | Depth: 11.34 in. | Height: 15 in. | Width: 10.5 in. | Weight: 28.2 lb

Features:

• Supports NeoTek 30/50/70 Series, 18/48/17/47/67 Series, and Conventional BB Spindles for Cleco-controlled fastening stations.
• Transducer Controlled architecture supports torque monitoring and process control in safety-critical assembly applications.
• Controls up to 16 corded or cordless tools, helping plants expand multi-tool fastening stations without adding unrelated controller platforms.
• User-friendly 8.5” interactive screen enables simple programming and quick access to tightening data.
• Standard CompactFlash memory card stores up to 10,000 run downs and can be switched between controllers with a reboot time under one minute.
• Remote programming software enables production process control from another location for better line supervision and setup management.
• Future-proof software and hardware architecture delivers Industry 4.0 capabilities for connected manufacturing environments.
• Quick mount bracket helps simplify installation and supports cleaner controller placement at the workstation.

Made in USA:

Applications:

• Automotive and EV assembly: expanding controlled fastening stations that use Cleco NeoTek or legacy corded tool platforms.
• Aerospace and defense production: supporting fastening operations where tool compatibility, torque traceability, and process documentation matter.
• Industrial assembly lines: managing multiple Cleco tools in production cells, repair stations, and rework areas.
• Heavy truck and equipment manufacturing: integrating secondary controller capacity for multi-spindle or multi-tool tightening processes.
• Plant engineering and controls teams: standardizing Cleco controller infrastructure during line upgrades, controller replacements, or station expansion projects.

FAQs:

• Q: What does “secondary” mean on the mPro400GCD-SH?
  A: “Secondary” identifies this unit as a controller used as part of a larger Cleco controller system rather than the main primary control point. It is typically selected when a station needs additional tool capacity or support for compatible Cleco tool families.
• Q: Which tools are compatible with the mPro400GCD-SH?
  A: Listed compatibility includes NeoTek 30/50/70 Series tools, 18/48/17/47/67 Series tools, and Conventional BB Spindles. Final compatibility should be verified against the exact tool model, cable, software version, and plant controller configuration.
• Q: How many tools can this controller manage?
  A: The mPro400GCD-SH can control up to 16 corded or cordless tools, depending on the system setup and compatible Cleco tool configuration.
• Q: What does transducer controlled mean?
  A: A transducer controlled fastening system measures torque or fastening output through a sensor. This helps manufacturers verify tightening results and maintain better process control than time-only or non-measured fastening methods.
• Q: Is this controller a good choice for a small repair shop?
  A: No. This controller is intended for Cleco precision fastening systems in production assembly environments. It is best suited for manufacturing plants, engineered workstations, tool control programs, and assembly lines that already use compatible Cleco tools.

Looking for more information about Cleco Controller? Click here to view the Catalog.

Need help selecting the correct Cleco Controllers for your application? Please call (800) 608-5210 or email info@intlairtool.com