Ingersoll Rand W9691 20V High Torque Cordless Impact Wrench | 1" Square Drive | 3000 (ft-lbs) Nut-Busting Torque | (Bare Tool Only, Battery Not Included)

Removing deeply recessed fasteners on heavy trucks, construction equipment, and large industrial machinery requires both substantial torque and sufficient reach. The Ingersoll Rand W9691 High Torque Cordless Impact Wrench combines 3,000 ft-lbs of nut-busting torque (maximum breakaway force for loosening stubborn fasteners) with a 1-inch square drive and 6-inch extended anvil to access fasteners positioned deeper within wheel assemblies and machinery components. Part of the W9000 Series IQV20 cordless platform, the W9691 also delivers 2,200 ft-lbs of maximum fastening torque and operates at up to 890 RPM, making it suitable for high-torque bolting operations in commercial fleet service, heavy equipment maintenance, and industrial repair facilities. Its extended-anvil configuration provides additional reach without requiring an air compressor, pneumatic hose, or external electrical connection during operation.

The W9691 operates with two 20V IQV20 lithium-ion batteries installed simultaneously and features the IQV Power Control System, which offers four selectable modes for different fastening requirements. Snug Mode and Mid-Power Mode provide automatic shutoff near their respective torque settings, helping technicians control preliminary tightening before final torque verification. The D-handle design incorporates a 360-degree adjustable auxiliary handle for positioning and control during high-torque work, while the protected battery configuration keeps both batteries positioned within the tool's frame. Measuring 26.1 inches in overall length and weighing 25.9 lbs without batteries, this model prioritizes access to recessed fasteners over the shorter profile of the standard-anvil W9491. Its IP56-rated construction provides additional protection against dust and water jets encountered in maintenance environments.

*Note: This product is supplied as a bare tool only. Batteries and charger are not included and must be purchased separately. The W9691 requires two compatible IQV20 batteries installed simultaneously for operation. Please confirm battery and charger availability before ordering.

Type: High Torque Cordless Impact Wrench | Series: W9000 / IQV20 | Model: W9691 | Configuration: Bare Tool Only | Drive Size: 1" | Drive Type: Square, Socket Retainer Ring and Thru-Hole | Anvil: 6" Extended | Nut-Busting Torque: 3,000 ft-lbs (4,067 Nm) | Maximum Fastening Torque: 2,200 ft-lbs (3,000 Nm) | Maximum Reverse Torque: 2,200 ft-lbs (3,000 Nm) | Maximum Free Speed: 890 RPM | Blows Per Minute: 1,170 BPM | Battery System: IQV20 | Required Batteries: 2 x 20V | Specified Battery Model: BL2022 | Length: 26.1" (664 mm) | Weight Without Batteries: 25.9 lbs (11.75 kg) | Weight With Batteries: 29.1 lbs (13.2 kg) | Protection Rating: IP56 | Fasteners Per Charge: Up to 250

Features:

• Delivers 3,000 ft-lbs of nut-busting torque for loosening large, stubborn fasteners encountered during commercial vehicle and heavy machinery maintenance.
• 6-inch extended anvil provides additional reach for recessed wheel nuts and difficult-to-access fastening locations.
• 1-inch square drive with socket retainer ring and thru-hole supports secure attachment of appropriately rated impact sockets.
• IQV Power Control System provides Full Power Reverse, Snug Mode, Mid-Power Mode, and Full Power Forward for selecting the appropriate operating setting.
• Snug and Mid-Power modes feature automatic shutoff near 180 ft-lbs and 400 ft-lbs, respectively, to assist with preliminary fastener tightening.
• D-handle configuration with 360-degree adjustable auxiliary handle provides multiple gripping positions for improved handling around large equipment.
• IP56-rated protection helps resist dust intrusion and water jets, while impact- and chemical-resistant composite housing supports operation around common maintenance-shop fluids.
• IQV20 battery platform provides up to 250 fasteners per charge under manufacturer test conditions when equipped with the specified battery configuration.

Applications:

• Commercial truck and trailer service: Removing recessed wheel fasteners and servicing large bolted assemblies on heavy commercial vehicles.
• Construction equipment maintenance: Loosening and installing large fasteners on excavators, loaders, and earthmoving machinery where extended reach is beneficial.
• Rail equipment maintenance: Accessing large mechanical fasteners during rail vehicle and infrastructure equipment service, subject to applicable maintenance procedures.
• Industrial machinery repair: Performing equipment disassembly and high-torque fastening tasks around large mechanical assemblies without compressed air infrastructure.
• Mobile equipment and fleet repair: Carrying out cordless fastener removal at roadside service locations and remote work sites where conventional pneumatic tools are inconvenient.

FAQs:

• Q: Does the Ingersoll Rand W9691 come with batteries or a charger?
  A: No. The W9691 is supplied as a bare tool without batteries or a charger. It requires two compatible IQV20 batteries installed simultaneously. Buyers needing a complete battery package can consider the W9691-K2E or W9691-K4E kits, which include batteries and a dual-bay charger.
• Q: What is the advantage of the W9691's 6-inch extended anvil?
  A: The extended anvil provides additional reach into recessed fastening areas, including deep wheel assemblies and locations obstructed by surrounding machinery components. It is particularly useful where a standard-anvil impact wrench cannot conveniently reach the fastener.
• Q: How does the W9691 compare with the W9491 cordless impact wrench?
  A: The W9691 provides 3,000 ft-lbs of nut-busting torque and a 6-inch extended anvil, compared with 2,600 ft-lbs and a standard anvil on the W9491. Both models deliver 2,200 ft-lbs of maximum fastening torque and operate at up to 890 RPM. The W9691 is better suited to recessed fasteners, while the W9491 offers a shorter tool configuration.
• Q: What batteries does the W9691 require?
  A: Ingersoll Rand specifies two BL2022 IQV20 20V lithium-ion batteries for operation. The tool belongs to the IQV20 battery platform, but both battery positions must be populated with compatible batteries. Batteries are purchased separately with this bare-tool configuration.
• Q: Can the W9691 be used to tighten commercial truck wheel nuts?
  A: Yes, provided the fastener requirements are within the tool's operating capabilities and suitable impact-rated sockets are used. Its 2,200 ft-lbs maximum fastening torque supports large-fastener installation. Always verify the final tightening torque with a calibrated torque wrench according to the vehicle manufacturer's instructions.

Looking for more information about Ingersoll Rand Impact Wrench? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Impact Wrenches, please call (800) 608-5210 or email info@intlairtool.com