Ingersoll Rand TIR6600S-P00DH Plain Trolley | TIR Series | 1/4-3 (metric tons) Capacity | Hook Adapter Suspension

For overhead lifting systems that require manual load positioning across wider beam flanges, the Ingersoll Rand TIR6600S-P00DH Plain Trolley provides a beam-travel solution with a hook adapter suspension. Part of the TIR Series, this trolley is rated for 6,600 lbs (3 metric tons) and supports compatible hoist applications across the 1/4–3 metric ton capacity range. The plain trolley configuration moves along the beam by manual pushing or pulling, not a geared hand chain or powered drive. Its hook-on adapter provides a suspension connection for a suitable hoist, making this configuration useful for fabrication shops, machinery maintenance facilities, assembly stations, and industrial material handling operations.

The TIR6600S-P00DH is configured for a 6–12 inch wide beam flange range, distinguishing it from the standard-flange TIR6600 trolley models. Its cast-iron wheels use a universal tread profile suitable for properly matched flat or tapered beam flanges, while permanently greased sealed bearings support rolling movement. The trolley features all-steel construction and integral rail sweeps that help clear debris from the wheel travel path. Ingersoll Rand specifies a 42-inch minimum curve radius for the TIR6600 family, allowing use on appropriately designed curved beam systems. With a minimum 5:1 design factor under the manufacturer's stated hoisting requirements, this configuration provides an overhead suspension arrangement for appropriately rated lifting equipment when installed on a verified supporting structure.

Type: Plain Hook-On Beam Trolley | Model: TIR6600S-P00DH | Series: TIR Series | Rated Capacity: 6,600 lbs (3 Metric Tons) | Supported Hoist Capacity Range: 1/4–3 Metric Tons | Travel Type: Manual, Plain | Suspension: Hook Adapter | Beam Flange Adjustment: 6"–12" | Wheel Material: Cast Iron | Wheel Tread: Universal, Flat or Tapered Beam Flanges | Minimum Curve Radius: 42" | Hand Chain / Pendant: None | Design Factor: Minimum 5:1 | Referenced Standard: ANSI B30.16

Features:

• Plain trolley design provides manually controlled horizontal travel along a suitable overhead beam without requiring a powered travel mechanism.
• Hook adapter suspension accommodates an appropriately rated hoist with a suitable upper hook connection.
• Wide-flange configuration is designed for beam widths from 6 to 12 inches, allowing installation on beams outside the standard TIR6600 flange range.
• Standard cast-iron wheels feature a universal tread profile for use with compatible flat or tapered beam flanges.
• Permanently greased sealed wheel bearings support smooth rolling movement during overhead material handling.
• All-steel trolley construction provides the structural framework for the specified lifting capacity.
• Integral rail sweeps help clear debris from the beam travel path as the trolley moves.
• Minimum curve radius of 42 inches supports suitably designed curved overhead beam arrangements.
• Modular TIR Series construction allows different suspension and travel configurations to be specified for application requirements.
• Manufacturer-designed to meet ANSI B30.16 hoisting requirements with a minimum 5:1 design factor.

Made in USA:

Applications:

• Industrial machinery maintenance: Moving suspended motors, pumps, gearboxes, and other suitable components along a verified overhead beam.
• Manufacturing facilities: Positioning loads between assembly, installation, and service locations using a compatible hook-mounted hoist.
• Metal fabrication shops: Supporting manually controlled horizontal movement of fabricated components during material handling operations.
• Equipment installation: Providing a traveling suspension point for approved lifting arrangements on wider structural beam flanges.
• Plant maintenance and MRO: Incorporating a hook-on hoist into a beam-travel system without a separate powered trolley drive.
• Industrial lifting system upgrades: Selecting a wide-flange trolley configuration when an existing overhead beam falls outside the standard flange adjustment range.

FAQs:

• Q: What is the capacity of the Ingersoll Rand TIR6600S-P00DH?

  A: The TIR6600S-P00DH is a 6,600 lb (3 metric ton) trolley. The manufacturer's 1/4–3 metric ton range describes the various hoist capacities supported by the TIR6600 family. The allowable load for a complete lifting system is limited by the lowest-rated component, including the hoist, trolley, suspension connection, and supporting beam.

• Q: What does hook adapter suspension mean?

  A: The hook adapter provides a suspension connection for a suitably rated hoist's upper hook. The manufacturer's ordering guide identifies the H suspension code as the hook adapter arrangement for the 3 metric ton TIR6600 family. Confirm the hoist's hook geometry and correct engagement before installation.

• Q: What beam flange width is specified for this exact model?

  A: The D flange code identifies a wide adjustment range of 6–12 inches for the 3 metric ton TIR6600 trolley. This is different from the standard A flange configuration, which is listed for 3.3–6 inch beam widths. Beam shape, strength, condition, and wheel engagement must also be checked.

• Q: How does the TIR6600S-P00DH differ from the TIR6600S-P00AP?

  A: The TIR6600S-P00DH uses a hook adapter and wide-flange configuration for 6–12 inch beams. The TIR6600S-P00AP uses the standard flange arrangement and has plain suspension without a lug or hook adapter. Both are manually traversed trolley configurations from the same TIR6600 family.

• Q: Does the TIR6600S-P00DH include a geared hand chain or powered travel motor?

  A: No. The P designation identifies a plain trolley, and the 00 designation identifies no hand chain or pendant control. Horizontal travel is produced manually. The trolley does not provide powered lifting; a compatible hoist performs the lifting function.

• Q: Can this trolley be used on a curved beam?

  A: Ingersoll Rand specifies a 42-inch minimum curve radius for the TIR6600 family. The beam geometry, wheel fit, supporting structure, and complete installation must satisfy the manufacturer's requirements before use on a curved runway.

Looking for more information about Ingersoll Rand Plain Trolley? Click here to view the Catalog.

For help selecting the correct Ingersoll Rand Plain Trolleys for your assembly application, call (800) 608-5210 or email info@intlairtool.com