Ingersoll Rand SMB030-30-28V Silver Series Manual Chain Hoist is designed for controlled manual lifting of loads up to 3 metric tons (6,600 lb). This configuration provides a 30 ft standard lift, 28 ft hand chain drop, and 1 chain fall. The Silver Series uses high-strength, all-stamped steel construction for reduced weight and improved impact resistance, along with roller bearings on the input shaft for easier lifting. It is suited to demanding manual lifting applications where the specified capacity and extended lift are required.
The SMB030 uses a 10 x 30 mm load chain and requires 100 lb of pull to lift the rated load. The manufacturer specifies 116 ft of hand-chain overhaul per 1 ft of load lift and a 2.1 lb/ft load-chain weight for the SMB030. The Silver Series also features a self-adjusting mechanical load brake, hardened swivel-latch hooks, and overload protection in which the clutch slips in the lifting direction only. The 30 ft lift and 28 ft hand-chain drop identify the specific configuration represented by SKU SMB030-30-28V.
Type: Manual Chain Hoist | Series: Silver Series | Model: SMB030-30-28V | Capacity: 3 Metric Tons (6,600 lb) | Standard Lift: 30 ft | Hand Chain Drop: 28 ft | Chain Falls: 1 | Load Chain Size: 10 x 30 mm | Pull to Lift Rated Load: 100 lb | Hand Chain Overhaul: 116 ft per 1 ft of Load Lift | Load Chain Weight: 2.1 lb/ft | Overload Protection: Slip Clutch | Minimum Headroom: 20.9 in
Features:
- High-strength, all-stamped steel construction provides decreased weight and improved impact resistance.
- Single chain fall provides the specified lifting arrangement for the 3 metric ton SMB030 capacity.
- Encased and retained roller bearings on the input shaft support efficient operation and ease of maintenance.
- Self-adjusting disc-type double-pawl mechanical load brake provides controlled load holding.
- Overload protection is provided by a clutch that slips in the lifting direction only.
- Nickel/chrome-plated exterior and zinc-plated frame components provide increased corrosion resistance.
- Double hand-chain guides help provide smooth operation when pulling excess hand chain.
- Open-frame construction allows easier cleaning and inspection.
- Hardened swivel-latch hooks provide the specified hook configuration for the Silver Series.
- CE-certified hoists meet or exceed regional requirements including ASME B30.16 and HST-2M.
Applications:
- Construction and jobsite lifting — raising and positioning equipment and materials within the 3 metric ton rated capacity.
- Industrial maintenance — lifting machinery components and equipment during repair and service operations.
- Rigging applications — controlled manual lifting using the single-chain-fall configuration.
- Material handling — positioning loads in industrial facilities and workshops where a 30 ft lift is required.
FAQs:
- Q: What is the capacity of the SMB030-30-28V?
A: The hoist is rated for 3 metric tons, equivalent to 6,600 lb, when operated according to manufacturer specifications and proper lifting procedures. - Q: What does the 30 ft standard lift mean?
A: The 30 ft lift identifies the vertical load-travel configuration for this model. - Q: What does the 28 ft hand chain drop mean?
A: The 28 ft hand-chain drop identifies the operating hand-chain configuration specified for this SKU. - Q: How many chain falls does the SMB030-30-28V use?
A: It uses 1 chain fall. The Silver Series uses a single chain fall through the 3 metric ton capacity. - Q: What type of overload protection does this model have?
A: The Silver Series uses an overload clutch that slips in the lifting direction only. - Q: What size load chain does the SMB030 use?
A: The SMB030 uses a 10 x 30 mm load chain. - Q: How much pull is required to lift the rated load?
A: The specified pull to lift the rated 3 metric ton load is 100 lb. - Q: What is the minimum headroom for the SMB030?
A: The manufacturer specifies 20.9 in minimum headroom for the SMB030.
| SKU | CAPACITY | # FALLS | PULL TO LIFT RATED LOAD |
CHAIN O'HAULED TO LIFT LOAD 1 FT |
CHAIN SIZE MM |
CHAIN WEIGHT PER FOOT |
SHIPPING WEIGHT WITH 10' OF LIFT |
|||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LB | METRIC TONS | LB | KG | FT | M | LB | KG | LB | KG | |||
| SMB005 | 1,100 | 0.50 | 1 | 55 | 25 | 25 | 7.6 | 5 x 15 | 0.6 | 0.3 | 23.5 | 10.68 |
| SMB010 | 2,200 | 1 | 1 | 64 | 29.1 | 39 | 11.9 | 6 x 18 | 0.6 | 0.3 | 26.8 | 12.18 |
| SMB015 | 3,300 | 1.50 | 1 | 69 | 31.4 | 58 | 17.7 | 7 x 21 | 1 | 0.5 | 38.5 | 17.5 |
| SMB020 | 4,400 | 2 | 1 | 77 | 35 | 75 | 22.9 | 8 x 24.6 | 1.1 | 0.5 | 42.4 | 19.27 |
| SMB030 | 6,600 | 3 | 1 | 100 | 45.5 | 116 | 35.4 | 10 x 30 | 2.1 | 1 | 70.4 | 32 |
| SMB050 | 11,000 | 5 | 2 | 83 | 37.7 | 187 | 57 | 9 x 27 | 2.4 | 1.1 | 90.2 | 41 |
Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog
For help choosing the proper Ingersoll Rand Hoists for your assembly application, please email info@intlairtool.com or call (800) 608-5210
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
