Ingersoll Rand SMB020-20-18V Silver Series Manual Chain Hoist | 20' Standard Lift | 2 (metric tons) Capacity | 1 Chain Falls

Ingersoll Rand SMB020-20-18V Silver Series Manual Chain Hoist is designed for controlled manual lifting of loads up to 2 metric tons (4,400 lb). This configuration provides a 20-ft standard lift, an 18-ft hand-chain drop, and 1 chain fall. The Silver Series combines all-steel, low-headroom construction with a self-adjusting mechanical load brake, hardened roller bearings, and overload protection for construction, maintenance, rigging, and general material-handling applications.

The SMB020-20-18V uses an 8 x 24.6 mm load chain and requires 77 lb of pull to lift the rated load. Its single-chain-fall configuration provides the specified 2 metric ton lifting capacity, while the overload protection is designed to help reduce downtime and repair costs resulting from abusive loading conditions. The 20 ft lift and 18 ft hand-chain drop identify the specific configuration represented by this SKU.

Type: Manual Chain Hoist | Series: Silver Series | Model: SMB020-20-18V | Capacity: 2 Metric Tons (4,400 lb) | Standard Lift: 20 ft | Hand Chain Drop: 18 ft | Chain Falls: 1 | Load Chain Size: 8 x 24.6 mm | Pull to Lift Rated Load: 77 lb | Overload Protection: Slip Clutch | Minimum Headroom: 18.2 in | Chain Weight: 1.1 lb/ft

Features:

• All-steel, low-headroom construction provides a compact configuration for manual lifting applications.
• Single chain fall provides the specified lifting arrangement for the 2 metric ton SMB020 capacity.
• Self-adjusting disc-type double-pawl mechanical load brake provides controlled load holding.
• Hardened roller bearings support efficient operation and durability.
• Overload protection helps reduce downtime and repair costs resulting from abusive loading conditions.
• Four-layer nickel, copper, nickel, and chrome finish provides the specified exterior corrosion-resistant finish.
• Hardened swivel-latch hooks provide the specified hook configuration for the Silver Series.
• Low-headroom design provides an 18.2 in minimum headroom specification for the SMB020 model.
• The Silver Series is designed for construction and rental applications as well as maintenance, rigging, and industrial material handling.

Applications:

• Construction and rental — raising and positioning equipment and materials within the 2 metric ton rated capacity.
• Industrial maintenance — lifting machinery components and equipment during repair and service operations.
• Rigging — controlled manual lifting using the single-chain-fall configuration.
• Material handling — positioning loads in workshops, facilities, and industrial environments where a 20 ft lift is required.
• Plant and utility work — supporting manual lifting tasks where compact, low-headroom equipment is required.

FAQs:

• Q: What is the capacity of the SMB020-20-18V?
  A: The hoist is rated for 2 metric tons, equivalent to 4,400 lb, when operated according to manufacturer specifications and proper lifting procedures.
• Q: What does the 20 ft standard lift mean?
  A: The 20 ft lift identifies the vertical load-travel configuration for this model.
• Q: What does the 18 ft hand chain drop mean?
  A: The 18 ft hand-chain drop identifies the operating hand-chain configuration supplied with this SKU.
• Q: How many chain falls does the SMB020-20-18V use?
  A: It uses 1 chain fall.
• Q: What type of overload protection does this model have?
  A: The V configuration uses a slip clutch for overload protection. The Silver Series design uses the clutch to help protect against abusive loading conditions.
• Q: What size load chain does the SMB020 use?
  A: The SMB020 uses an 8 x 24.6 mm load chain.
• Q: How much pull is required to lift the rated load?
  A: The specified pull to lift the rated 2 metric ton load is 77 lb.
• Q: What is the minimum headroom for the SMB020?
  A: The specified minimum headroom is 18.2 in.

Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Hoists for your assembly application, please email info@intlairtool.com or call (800) 608-5210