Ingersoll Rand SMB010-30-28V Silver Series Manual Chain Hoist | 30' Standard Lift | 1 (metric tons) Capacity | 1 Chain Falls

Ingersoll Rand SMB010-30-28V Silver Series Manual Chain Hoist is configured for a 1 metric ton (2,200 lb) capacity, 30 ft standard lift, 28 ft hand chain drop, and 1 chain fall. The Silver Series uses high-strength stamped steel construction, roller bearings on the input shaft, a self-adjusting mechanical load brake, and an overload clutch that slips in the lifting direction. This configuration is suited to manual lifting and positioning applications where a longer load travel is required.

The SMB010 model uses a 6 x 18 mm load chain and requires 64 lb of pull to lift the rated load. The manufacturer specifies 39 ft of hand-chain overhaul for each 1 ft of load lift on the 1 metric ton model. The V designation identifies the overload-clutch configuration, while the model format specifies the lift and hand-chain drop separately. The 30 ft / 28 ft configuration therefore should not be confused with the 20 ft / 18 ft SMB010 model.

Type: Manual Chain Hoist | Series: Silver Series | Model: SMB010-30-28V | Capacity: 1 Metric Ton (2,200 lb) | Standard Lift: 30 ft | Hand Chain Drop: 28 ft | Chain Falls: 1 | Load Chain Size: 6 x 18 mm | Pull to Lift Rated Load: 64 lb | Chain Overhaul per 1 ft of Lift: 39 ft | Overload Protection: Slip Clutch

Features:

• High-strength, all-stamped steel construction provides impact resistance while keeping the hoist relatively lightweight.
• One chain fall is used for the 1 metric ton SMB010 capacity.
• Encased and retained roller bearings on the input shaft support efficient lifting and ease of maintenance.
• Self-adjusting disc-type double-pawl mechanical load brake provides controlled load holding.
• Overload protection is provided by a clutch that slips in the lifting direction only.
• Nickel/chrome-plated exterior and zinc-plated frame components provide increased corrosion resistance.
• Double hand-chain guides help provide smooth operation when pulling excess hand chain.
• Open-frame construction allows easier cleaning and inspection.
• Hardened swivel-latch hooks provide the specified hook configuration for the Silver Series.
• CE-certified Silver Series hoists meet or exceed regional requirements including ASME B30.16 and HST-2M.

Applications:

• Construction and jobsite lifting — raising and positioning equipment or materials where a 1 metric ton manual hoist is appropriate.
• Industrial maintenance — lifting machinery components and equipment during repair and service work.
• Rigging operations — controlled manual lifting with a single-chain-fall configuration.
• Material handling — positioning loads in industrial, maintenance, and workshop environments where extended lift is required.

FAQs:

• Q: What is the capacity of the SMB010-30-28V?
  A: The hoist has a rated capacity of 1 metric ton, equivalent to 2,200 lb.
• Q: What does the 30 ft standard lift mean?
  A: It specifies 30 ft of vertical load travel for this configuration.
• Q: Why does this model have a 28 ft hand chain drop?
  A: The 28 ft hand-chain drop is the specific operating-chain configuration identified by the SKU. The manufacturer ordering format specifies the base model, lift, and hand-chain drop separately.
• Q: How many chain falls does the SMB010-30-28V use?
  A: It uses 1 chain fall.
• Q: What type of overload protection does the V model have?
  A: The V configuration uses an overload clutch that slips in the lifting direction only.
• Q: What size load chain does the SMB010 use?
  A: The SMB010 uses a 6 x 18 mm load chain.
• Q: How much pull is required to lift the rated load?
  A: The manufacturer's specification is 64 lb of pull to lift the rated 1 metric ton load.

Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Hoists for your assembly application, please email info@intlairtool.com or call (800) 608-5210