Ingersoll Rand SMB010-20-8V Silver Series Manual Chain Hoist | 20' Standard Lift | 1 (metric tons) Capacity | 1 Chain Falls

Ingersoll Rand SMB010-20-8V Silver Series Manual Chain Hoist is a 1 metric ton (2,200 lb) capacity hand-operated hoist configured with a 20 ft standard lift, 8 ft hand chain drop, and 1 chain fall. The Silver Series uses an all-steel construction with roller bearings on the input shaft, a self-adjusting mechanical load brake, and standard overload protection for controlled manual lifting. The manufacturer catalog identifies the Silver Series as covering 0.50 to 5 metric ton capacities and specifies a single chain fall through 3 tons.

The SMB010 model uses a 6 x 18 mm load chain and requires 64 lb of pull to lift the rated load. The Silver Series overload clutch slips in the lifting direction only. For this particular SKU, the 8 ft hand-chain drop is important: the manufacturer catalog explains that the ordering format is base model, lift, and hand-chain drop, so the SMB010-20-8V designation represents the 20 ft lift and 8 ft hand-chain configuration.

Type: Manual Chain Hoist | Series: Silver Series | Model: SMB010-20-8V | Capacity: 1 Metric Ton (2,200 lb) | Standard Lift: 20 ft | Hand Chain Drop: 8 ft | Chain Falls: 1 | Load Chain Size: 6 x 18 mm | Pull to Lift Rated Load: 64 lb | Overload Protection: Slip Clutch | Minimum Headroom: 13.8 in

Features:

• All-steel construction provides a durable and lightweight manual hoist design.
• Encased and retained roller bearings support efficient operation and easier maintenance.
• Self-adjusting disc-type double-pawl mechanical load brake provides controlled load holding.
• Overload protection is provided by a clutch that slips in the lifting direction only.
• Nickel/chrome-plated exterior and zinc-plated frame components provide corrosion resistance.
• Double hand-chain guides help provide smooth operation when pulling excess hand chain.
• Open-frame construction allows easier cleaning and inspection.
• Hardened swivel-latch hooks provide the specified hook configuration for the Silver Series.
• CE certification and compliance with regional requirements including ASME B30.16 and HST-2M are specified for the Silver Series in the manufacturer catalog.

Applications:

• Construction — manually lifting and positioning equipment and materials where a 1 metric ton chain hoist is appropriate.
• Industrial maintenance — raising machinery components and equipment during repair and service operations.
• Rigging — controlled manual lifting using a single-chain-fall configuration.
• Material handling — positioning loads in workshops, maintenance areas, and industrial facilities.

FAQs:

• Q: What is the capacity of the SMB010-20-8V?
  A: The SMB010-20-8V is rated for 1 metric ton, equivalent to 2,200 lb, when operated according to manufacturer specifications and proper lifting procedures.
• Q: What does the 20 ft standard lift mean?
  A: It identifies the load travel configuration as a 20 ft lift. The hand-chain drop is specified separately in the model number.
• Q: Why does this model have an 8 ft hand chain drop?
  A: The 8 ft hand-chain drop is part of the specific SKU configuration. It should not be replaced with the 18 ft drop of the separate SMB010-20-18V model.
• Q: How many chain falls does the SMB010-20-8V use?
  A: It uses 1 chain fall.
• Q: What type of overload protection does this model have?
  A: The V configuration uses a slip clutch. The manufacturer specifies that the clutch slips in the lifting direction only.
• Q: What size load chain is used?
  A: The SMB010 uses a 6 x 18 mm load chain.

Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Hoists for your assembly application, please email info@intlairtool.com or call (800) 608-5210