Designed for manual lifting, pulling, positioning, and rigging applications, the Ingersoll Rand SLB300-F Silver Series Lever Chain Hoist provides a 1.50 metric ton (3,300 lb) rated capacity in a hoist without a load chain configuration. The SLB300 Silver Series features high-strength, all-stamped steel construction for decreased weight and better impact resistance, along with a compact design suited to demanding lifting applications.
The SLB300 is specified with a 53 lb pull to lift the rated load and a 7.1 x 21.2 mm load chain when equipped with its specified chain. Encased and retained roller bearings support efficiency and maintenance, while double-reduction gearing provides controlled spotting and low handle effort. An automatic inertia brake engages when a load is applied in free-chain mode, helping minimize operator setup error. The short handle and stroke allow 360° operation for rigging in tight spaces.
Type: Lever Chain Hoist | Series: Silver Series | Model: SLB300-F | Capacity: 1.50 Metric Tons (3,300 lb) | Load Chain: Not Included | Chain Falls: 1 | Pull to Lift Rated Load: 53 lb | Specified Load Chain Size: 7.1 x 21.2 mm | Chain Weight: 0.7 lb/ft | Minimum Headroom: 15.7 in
Features:
- Supplied without load chain, allowing compatible chain to be selected separately for the intended setup.
- High-strength, all-stamped steel construction provides decreased weight and better impact resistance.
- Open-frame design allows easier cleaning and inspection.
- Encased and retained roller bearings support increased efficiency and ease of maintenance.
- Premium-grade alloy load chain is the specified chain construction for the SLB300 when equipped with compatible chain.
- Hardened swivel-latch hooks provide the specified hook configuration.
- Nickel- and chrome-plated exterior and zinc-plated frame components provide increased corrosion resistance.
- Double-reduction gearing provides superior spotting characteristics and low handle effort.
- Deep lug knobs facilitate one-handed operation with or without gloves.
- Short handle and stroke allow 360° operation for rigging in tight spaces.
- Automatic inertia brake engages when a load is applied in free-chain mode, helping minimize operator setup error.
- The Silver Series lever chain hoist line meets or exceeds ANSI B30.21 requirements according to the manufacturer catalog.
Applications:
- Custom rigging setups — suitable where the required compatible load chain is selected separately.
- Manual load positioning — provides controlled lifting and positioning capability within the 3,300 lb rated capacity when properly equipped.
- Maintenance and repair — useful for positioning equipment, components, and machinery where a manual lever hoist is appropriate.
- Confined-space rigging — the short handle and stroke allow 360° operation where operating space is limited.
- Material handling — provides the 1.50 metric ton capacity of the SLB300 platform for compatible manual lifting applications.
FAQs:
- Q: What is the capacity of the SLB300-F?
A: The SLB300 is rated for 1.50 metric tons, equivalent to 3,300 lb. - Q: What does “without load chain” mean?
A: The SLB300-F is supplied without the load chain. A compatible load chain must be obtained separately for the intended application. - Q: What load chain size is specified for the SLB300?
A: The manufacturer specifies a 7.1 x 21.2 mm load chain for the SLB300. The SLB300-F configuration is supplied without that chain. - Q: How much pull is required to lift the rated load?
A: The manufacturer specifies 53 lb of pull to lift the rated load. - Q: How many chain falls does the SLB300 use?
A: The SLB300 is specified with 1 chain fall. - Q: What is the minimum headroom?
A: The manufacturer specifies 15.7 in minimum headroom for the SLB300. - Q: Does the SLB300-F have a specified lift length?
A: No specific lift length is established for the chainless configuration in the supplied manufacturer catalog. Lift length depends on the compatible load chain selected for the application. - Q: Does the SLB300-F include an overload clutch?
A: The supplied Silver Series catalog does not identify an overload clutch for the SLB300. It specifies an automatic inertia brake that engages when a load is applied in free-chain mode.
| SKU | CAPACITY | # FALLS | PULL TO LIFT RATED LOAD |
CHAIN SIZE MM |
CHAIN WEIGHT PER FOOT |
SHIPPING WEIGHT WITH 10' OF LIFT |
||||
|---|---|---|---|---|---|---|---|---|---|---|
| LB | METRIC TONS | LB | KG | LB | KG | LB | KG | |||
| SLB150 | 1,650 | 0.75 | 1 | 41 | 18.6 | 6 x 18 | 0.5 | 0.2 | 16 | 7.3 |
| SLB200 | 2,200 | 1 | 1 | 60 | 27.3 | 6 x 18 | 0.5 | 0.2 | 16 | 7.3 |
| SLB300 | 3,300 | 1.50 | 1 | 53 | 24.1 | 7.1 x 21.2 | 0.7 | 0.3 | 26 | 11.8 |
| SLB600 | 6,600 | 3 | 1 | 53 | 24.1 | 10 x 30 | 1.5 | 0.7 | 46 | 20.9 |
| SLB1200 | 13,200 | 6 | 2 | 57 | 25.9 | 10 x 30 | 2.9 | 1.3 | 69 | 31.4 |
Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog
For help choosing the proper Ingersoll Rand Hoists for your assembly application, please email info@intlairtool.com or call (800) 608-5210
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
