Ingersoll Rand SLB300-15 Silver Series Lever Chain Hoist | 15' Standard Lift | 1-1/2 (metric tons) Capacity | 1 Chain Falls

Built for controlled manual lifting, pulling, positioning, and rigging, the Ingersoll Rand SLB300-15 Silver Series Lever Chain Hoist provides a 1.50 metric ton (3,300 lb) rated capacity with a 15 ft standard lift and 1 chain fall. Its high-strength, all-stamped steel construction is designed for decreased weight and better impact resistance, while the Silver Series design provides features intended for efficient operation, inspection, maintenance, and controlled load positioning. The manufacturer identifies the SLB300 as a 3,300 lb, 1.50 metric ton, single-chain-fall lever hoist.

The SLB300 requires 53 lb of pull to lift the rated load and uses a 7.1 x 21.2 mm premium-grade alloy load chain weighing 0.7 lb per foot. Encased and retained roller bearings support increased efficiency and ease of maintenance, while double-reduction gearing provides superior spotting characteristics and low handle effort. An automatic inertia brake engages when a load is applied in free-chain mode, helping minimize operator setup error. The short handle and stroke allow 360° operation for rigging in tight spaces.

Type: Lever Chain Hoist | Series: Silver Series | Model: SLB300-15 | Capacity: 1.50 Metric Tons (3,300 lb) | Standard Lift: 15 ft | Chain Falls: 1 | Pull to Lift Rated Load: 53 lb | Load Chain Size: 7.1 x 21.2 mm | Chain Weight: 0.7 lb/ft | Minimum Headroom: 15.7 in

Features:

• High-strength, all-stamped steel construction provides decreased weight and better impact resistance.
• Open-frame design facilitates cleaning and inspection.
• Encased and retained roller bearings provide increased efficiency and ease of maintenance.
• Premium-grade alloy load chain provides the specified load-chain construction.
• Hardened swivel-latch hooks provide the specified hook configuration.
• Nickel- and chrome-plated exterior and zinc-plated frame components provide increased corrosion resistance.
• Double-reduction gearing provides superior spotting characteristics and low handle effort.
• Deep lug knobs facilitate one-handed operation with or without gloves.
• Short handle and stroke allow 360° operation for rigging in tight spaces.
• Automatic inertia brake engages if a load is applied in free-chain mode, helping minimize operator setup error.
• The manufacturer identifies the Silver Series lever hoists as meeting or exceeding ANSI B30.21 requirements.

Applications:

• Manual load positioning — provides controlled lifting and positioning of loads within the 3,300 lb rated capacity.
• Maintenance and repair — suitable for positioning equipment, components, and machinery where a manual lever hoist is appropriate.
• Rigging operations — the single-chain-fall configuration provides manual lifting and positioning capability for compatible loads.
• Confined-space work — the short handle and stroke allow 360° operation where operating space is limited.
• Material handling — the 15 ft lift configuration provides additional vertical travel compared with shorter lift configurations.

FAQs:

• Q: What is the capacity of the SLB300-15?
  A: The SLB300-15 is rated for 1.50 metric tons, equivalent to 3,300 lb.
• Q: What does the 15 ft standard lift mean?
  A: It identifies this SKU as the SLB300 configuration supplied with 15 ft of lifting travel.
• Q: How many chain falls does the SLB300-15 have?
  A: The SLB300 uses 1 chain fall.
• Q: How much pull is required to lift the rated load?
  A: The manufacturer specifies 53 lb of pull to lift the rated load.
• Q: What size load chain does the SLB300 use?
  A: The manufacturer specifies a 7.1 x 21.2 mm load chain weighing 0.7 lb per foot.
• Q: What is the minimum headroom?
  A: The manufacturer specifies 15.7 in minimum headroom for the SLB300.
• Q: Can the SLB300-15 be operated in tight spaces?
  A: Yes. The short handle and stroke allow 360° operation for rigging in tight spaces.
• Q: Does the SLB300-15 have an overload clutch?
  A: The supplied catalog does not identify an overload clutch as a separate option for the SLB300. It does specify an automatic inertia brake that engages when a load is applied in free-chain mode.

Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Hoists for your assembly application, please email info@intlairtool.com or call (800) 608-5210