Ingersoll Rand SLB300-10 Silver Series Lever Chain Hoist | 10' Standard Lift | 1-1/2 (metric tons) Capacity | 1 Chain Falls

Built for controlled manual lifting, pulling, positioning, and rigging, the Ingersoll Rand SLB300-10 Silver Series Lever Chain Hoist provides a 1-1/2 metric ton (3,300 lb) rated capacity with a 10 ft standard lift and 1 chain fall. Its high-strength, all-stamped steel construction provides decreased weight and better impact resistance, while the compact lever-hoist design supports controlled manual operation in demanding lifting applications. The exact SLB300-10 configuration is listed by Intl Air Tool as a 10 ft, 1-1/2-ton Silver Series lever chain hoist.

The SLB300 requires 53 lb of pull to lift the rated load and uses a 7.1 x 21.2 mm premium-grade alloy load chain weighing 0.7 lb per foot. Encased and retained roller bearings support increased efficiency and ease of maintenance, while double-reduction gearing provides superior spotting characteristics and low handle effort. An automatic inertia brake engages if a load is applied while the hoist is in free-chain mode, helping minimize operator setup error. Its short handle and stroke allow 360° operation for rigging in tight spaces.

Type: Lever Chain Hoist | Series: Silver Series | Model: SLB300-10 | Capacity: 1-1/2 Metric Tons (3,300 lb) | Standard Lift: 10 ft | Chain Falls: 1 | Pull to Lift Rated Load: 53 lb | Load Chain Size: 7.1 x 21.2 mm | Chain Weight: 0.7 lb/ft | Minimum Headroom: 15.7 in | Shipping Weight with 10 ft Lift: 26 lb

Features:

• High-strength, all-stamped steel construction provides decreased weight and better impact resistance.
• Open-frame design makes cleaning and inspection easier.
• Encased and retained roller bearings support increased efficiency and ease of maintenance.
• Premium-grade alloy load chain provides the specified load-chain construction.
• Hardened swivel-latch hooks provide secure hook engagement during lifting operations.
• Nickel- and chrome-plated exterior and zinc-plated frame components provide increased corrosion resistance.
• Double-reduction gearing provides superior spotting characteristics and low handle effort.
• Deep lug knobs facilitate one-handed operation with or without gloves.
• Short handle and stroke allow 360° operation for rigging in tight spaces.
• Automatic inertia brake engages if a load is applied while the hoist is in free-chain mode, helping minimize operator setup error.
• Double hand-chain guides provide proper load-chain tracking and smooth operation around the load sheave.
• Silver Series lever chain hoists meet or exceed ANSI B30.21 standards according to the manufacturer catalog.

Applications:

• Manual load positioning — provides controlled lifting and positioning of loads within the 3,300 lb rated capacity.
• Maintenance and repair — suitable for positioning equipment, components, and machinery where a manual lever hoist is appropriate.
• Rigging — provides a single-chain-fall configuration for controlled manual lifting and positioning.
• Confined-space work — the short handle and stroke allow 360° operation where operating space is limited.
• Construction and material handling — the 10 ft standard lift provides vertical travel for general lifting and positioning tasks.

FAQs:

• Q: What is the capacity of the SLB300-10?
  A: The SLB300-10 is rated for 1-1/2 metric tons, equivalent to 3,300 lb.
• Q: What does the 10 ft standard lift mean?
  A: It identifies this SKU as the SLB300 configuration supplied with 10 ft of lifting travel.
• Q: How many chain falls does the SLB300-10 have?
  A: The SLB300 uses 1 chain fall.
• Q: How much pull is required to lift the rated load?
  A: The manufacturer specifies 53 lb of pull to lift the rated load.
• Q: What size load chain does the SLB300 use?
  A: The SLB300 uses a 7.1 x 21.2 mm load chain with a listed chain weight of 0.7 lb per foot.
• Q: What is the minimum headroom?
  A: The manufacturer specifies 15.7 in minimum headroom for the SLB300.
• Q: What is the shipping weight of the SLB300-10?
  A: The manufacturer catalog lists 26 lb shipping weight for the SLB300 with 10 ft of lift.
• Q: Can the SLB300-10 be operated in tight spaces?
  A: Yes. The short handle and stroke allow 360° operation for rigging in tight spaces.
• Q: Does the SLB300-10 have an overload clutch?
  A: The supplied catalog does not identify a separate overload-clutch option for the SLB300. It specifies an automatic inertia brake that engages when a load is applied in free-chain mode.

Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Hoists for your assembly application, please email info@intlairtool.com or call (800) 608-5210