Ingersoll Rand SLB200-F Silver Series Lever Chain Hoist | 1 (metric tons) Capacity | Hoist Without Load Chain

Built for manual lifting, pulling, positioning, and rigging applications, the Ingersoll Rand SLB200-F Silver Series Lever Chain Hoist provides a 1 metric ton (2,200 lb) rated capacity in a configuration supplied without load chain. The chainless configuration is intended for applications where the compatible load chain is sourced separately. The Silver Series design combines high-strength, all-stamped steel construction with a compact lever-hoist format for controlled manual operation.

The SLB200 has a specified 60 lb pull to lift the rated load and uses a 6 x 18 mm load chain when equipped with its specified chain. Encased and retained roller bearings support efficient operation and maintenance, while double-reduction gearing provides low handle effort and controlled spotting. An automatic inertia brake engages when a load is applied in free-chain mode, helping minimize operator setup error. The short handle and stroke allow 360° operation for rigging in tight spaces.

Type: Lever Chain Hoist | Series: Silver Series | Model: SLB200-F | Capacity: 1 Metric Ton (2,200 lb) | Load Chain: Not Included | Chain Falls: 1 | Pull to Lift Rated Load: 60 lb | Load Chain Size: 6 x 18 mm | Chain Weight: 0.5 lb/ft | Minimum Headroom: 14.4 in

Features:

• Chainless configuration allows the load chain to be supplied separately for the intended lifting setup.
• High-strength, all-stamped steel construction provides decreased weight and better impact resistance.
• Open-frame design facilitates cleaning and inspection.
• Encased and retained roller bearings provide increased efficiency and ease of maintenance.
• Premium-grade alloy load chain is the specified chain construction when the hoist is equipped with compatible load chain.
• Hardened swivel-latch hooks provide the specified hook configuration.
• Nickel- and chrome-plated exterior and zinc-plated frame components provide increased corrosion resistance.
• Double-reduction gearing provides superior spotting characteristics and low handle effort.
• Double hand-chain guides provide smooth operation when pulling excess hand chain.
• Deep lug knobs facilitate one-handed operation with or without gloves.
• Short handle and stroke allow 360° operation for rigging in tight spaces.
• Automatic inertia brake engages if a load is applied in free-chain mode, helping minimize operator setup error.
• Silver Series lever chain hoists meet or exceed ANSI B30.21 standards according to the manufacturer catalog.

Applications:

• Custom rigging setups — suitable where compatible load chain is selected separately for the intended configuration.
• Maintenance and repair — provides manual lifting and positioning capability within the 2,200 lb rated capacity when properly equipped.
• Confined-space rigging — the short handle and stroke allow 360° operation where operating space is limited.
• Material positioning — useful for controlled manual lifting and positioning when the appropriate load chain is supplied separately.

FAQs:

• Q: What is the capacity of the SLB200-F?
  A: The SLB200 is rated for 1 metric ton, equivalent to 2,200 lb.
• Q: What does “without load chain” mean?
  A: The SLB200-F is supplied without the load chain. A compatible load chain must be provided separately for the intended lifting application.
• Q: What load-chain size is specified for the SLB200?
  A: The manufacturer specifies a 6 x 18 mm load chain for the SLB200. The SLB200-F configuration is supplied without that chain.
• Q: How much pull is required to lift the rated load?
  A: The manufacturer specifies 60 lb of pull to lift the rated load.
• Q: What is the minimum headroom for the SLB200?
  A: The manufacturer specifies 14.4 in minimum headroom for the SLB200.
• Q: Does the SLB200-F have a specified lift length?
  A: No lift length is assigned to the chainless configuration because the supplied product does not include load chain. The lift length depends on the compatible chain supplied for the application.
• Q: Does the SLB200-F include a load chain?
  A: No. The product configuration is a hoist without load chain.
• Q: Does the SLB200-F have an overload clutch?
  A: The supplied Silver Series lever-hoist catalog does not identify an overload clutch as a standard feature of the SLB200. It specifies an automatic inertia brake that engages when a load is applied while the hoist is in free-chain mode.

Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Hoists for your assembly application, please email info@intlairtool.com or call (800) 608-5210