Built for controlled manual lifting, pulling, positioning, and rigging, the Ingersoll Rand SLB200-10 Silver Series Lever Chain Hoist provides a 1 metric ton (2,200 lb) rated capacity with a 10 ft standard lift and 1 chain fall. Its high-strength, all-stamped steel construction provides decreased weight and improved impact resistance, while the compact lever-hoist design is suited to lifting applications where controlled manual operation is required.
The SLB200 requires 60 lb of pull to lift the rated load and uses a 6 x 18 mm load chain weighing 0.5 lb per foot. Encased and retained roller bearings support operating efficiency and ease of maintenance, while double-reduction gearing provides controlled spotting and low handle effort. The short handle and stroke allow 360° operation for rigging in tight spaces, and double hand-chain guides provide smooth operation when pulling excess hand chain. The manufacturer specifies a 16 lb shipping weight with 10 ft of lift for the SLB200.
Type: Lever Chain Hoist | Series: Silver Series | Model: SLB200-10 | Capacity: 1 Metric Ton (2,200 lb) | Standard Lift: 10 ft | Chain Falls: 1 | Pull to Lift Rated Load: 60 lb | Load Chain Size: 6 x 18 mm | Chain Weight: 0.5 lb/ft | Minimum Headroom: 14.4 in | Shipping Weight with 10 ft Lift: 16 lb
Features:
- High-strength, all-stamped steel construction provides decreased weight and better impact resistance.
- Open-frame design makes cleaning and inspection easier.
- Encased and retained roller bearings provide increased efficiency and ease of maintenance.
- Premium-grade alloy load chain provides the specified load-chain construction.
- Hardened swivel-latch hooks provide the specified hook configuration.
- Nickel- and chrome-plated exterior and zinc-plated frame components provide increased corrosion resistance.
- Double-reduction gearing provides controlled spotting characteristics and low handle effort.
- Double hand-chain guides provide smooth operation when pulling excess hand chain.
- Deep lug knobs facilitate one-handed operation with or without gloves.
- Short handle and stroke allow 360° operation for rigging in tight spaces.
- Overload protection is provided by a clutch that slips in the lifting direction only.
- Silver Series lever chain hoists meet or exceed ANSI B30.21 standards according to the manufacturer catalog.
Applications:
- Manual load positioning — provides controlled lifting and positioning of loads within the 2,200 lb rated capacity.
- Maintenance and repair — useful for positioning equipment, components, and machinery where a manual lever hoist is appropriate.
- Confined-space rigging — the short handle and stroke support 360° operation where operating space is limited.
- Material handling — the 10 ft lift configuration provides standard vertical travel for general lifting and positioning tasks.
FAQs:
- Q: What is the capacity of the SLB200-10?
A: The SLB200-10 is rated for 1 metric ton, equivalent to 2,200 lb. - Q: What does the 10 ft standard lift mean?
A: It identifies this SKU as the SLB200 configuration supplied with 10 ft of lifting travel. - Q: How many chain falls does the SLB200-10 have?
A: The SLB200 uses 1 chain fall. - Q: How much pull is required to lift the rated load?
A: The manufacturer specifies 60 lb of pull to lift the rated load. - Q: What size load chain does the SLB200 use?
A: The SLB200 uses a 6 x 18 mm load chain with a listed weight of 0.5 lb per foot. - Q: What is the minimum headroom?
A: The manufacturer specifies 14.4 in minimum headroom for the SLB200. - Q: Does the SLB200 have overload protection?
A: Yes. The manufacturer specifies overload protection through a clutch that slips in the lifting direction only. - Q: Can the SLB200-10 be operated in tight spaces?
A: Yes. Its short handle and stroke allow 360° operation for rigging in tight spaces.
| SKU | CAPACITY | # FALLS | PULL TO LIFT RATED LOAD |
CHAIN SIZE MM |
CHAIN WEIGHT PER FOOT |
SHIPPING WEIGHT WITH 10' OF LIFT |
||||
|---|---|---|---|---|---|---|---|---|---|---|
| LB | METRIC TONS | LB | KG | LB | KG | LB | KG | |||
| SLB150 | 1,650 | 0.75 | 1 | 41 | 18.6 | 6 x 18 | 0.5 | 0.2 | 16 | 7.3 |
| SLB200 | 2,200 | 1 | 1 | 60 | 27.3 | 6 x 18 | 0.5 | 0.2 | 16 | 7.3 |
| SLB300 | 3,300 | 1.50 | 1 | 53 | 24.1 | 7.1 x 21.2 | 0.7 | 0.3 | 26 | 11.8 |
| SLB600 | 6,600 | 3 | 1 | 53 | 24.1 | 10 x 30 | 1.5 | 0.7 | 46 | 20.9 |
| SLB1200 | 13,200 | 6 | 2 | 57 | 25.9 | 10 x 30 | 2.9 | 1.3 | 69 | 31.4 |
Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog
For help choosing the proper Ingersoll Rand Hoists for your assembly application, please email info@intlairtool.com or call (800) 608-5210
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
