Ingersoll Rand SLB150-F Silver Series Lever Chain Hoist | 3/4 (metric tons) Capacity | Hoist Without Load Chain

For manual lifting, pulling, positioning, and rigging applications, the Ingersoll Rand SLB150-F Silver Series Lever Chain Hoist provides a 3/4 metric ton (1,650 lb) rated capacity in a configuration supplied without load chain. This chainless configuration allows the hoist body to be paired with the appropriate load chain separately. The SLB150 design uses all-steel construction, a compact lever mechanism, and a low required handle force for controlled manual operation.

The SLB150-F requires 41 lb of pull to lift the rated load and is designed around a 6 x 18 mm load-chain specification when equipped with its standard load chain. Its encased and retained roller bearings support efficient operation, while double-reduction gearing provides low handle effort and controlled spotting. A short handle and stroke allow 360° operation for rigging in tight spaces, and the Silver Series free-chain system incorporates an automatic brake action when a load is applied in free-chain mode. The manufacturer catalog does not assign a lift length to the SLB150-F because it is supplied without load chain.

Type: Lever Chain Hoist | Series: Silver Series | Model: SLB150-F | Capacity: 3/4 Metric Ton (1,650 lb) | Load Chain: Not Included | Pull to Lift Rated Load: 41 lb | Standard Chain Size: 6 x 18 mm | Chain Falls: 1 | Minimum Headroom: 13 in

Features:

• Supplied without load chain for applications where the chain is selected separately.
• All-steel construction provides the specified Silver Series construction.
• Open-frame design makes inspection, cleaning, and maintenance easier.
• Encased and retained roller bearings support efficient operation and ease of maintenance.
• Double-reduction gearing provides controlled spotting characteristics and low handle effort.
• Deep lug knobs facilitate one-handed operation with or without gloves.
• Short handle and stroke allow 360° operation for rigging in tight spaces.
• Hardened swivel-latch hooks provide secure hook engagement when the hoist is properly equipped and used.
• Nickel- and chrome-plated exterior and zinc-plated frame components provide increased corrosion resistance.
• The Silver Series free-chain system provides quick chain positioning, with the brake engaging when a load is applied in free-chain mode.
• The manufacturer states that Silver Series lever chain hoists meet or exceed ANSI B30.21 requirements.

Applications:

• Custom rigging applications — useful where the load chain is selected and installed separately for the intended setup.
• Maintenance and repair — provides manual lifting and positioning capability within the 1,650 lb rated capacity.
• Confined-space rigging — the short handle and stroke support 360° operation where operating room is limited.
• Material positioning — suitable for controlled manual lifting, pulling, and positioning when the appropriate load chain is supplied separately.

FAQs:

• Q: What is the capacity of the SLB150-F?
  A: The SLB150-F is rated for 3/4 metric ton, equivalent to 1,650 lb.
• Q: What does “without load chain” mean?
  A: The SLB150-F is supplied as the hoist body without load chain. A compatible load chain must be selected separately for the intended application.
• Q: What load-chain size is specified for the SLB150?
  A: The manufacturer specifies a 6 x 18 mm load chain for the SLB150. The SLB150-F itself is supplied without that chain.
• Q: How much pull is required to lift the rated load?
  A: The manufacturer specifies 41 lb of pull to lift the rated load.
• Q: What is the minimum headroom?
  A: The SLB150 dimensional data specifies 13 in minimum headroom.
• Q: Does the SLB150-F include a load chain?
  A: No. The “F” configuration is the hoist without load chain.
• Q: Does the SLB150-F have a specified lift length?
  A: No specific lift length is assigned to the F configuration because it is supplied without load chain. Lift length depends on the separately supplied compatible chain.
• Q: Does the SLB150-F have an overload clutch?
  A: No overload clutch is identified as a standard SLB150 feature in the supplied manufacturer catalog. The Silver Series documentation instead specifies its brake/free-chain system and other operating features.

Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Hoists for your assembly application, please email info@intlairtool.com or call (800) 608-5210