Ingersoll Rand SLB150-6 Silver Series Lever Chain Hoist | 6' Standard Lift | 3/4 (metric tons) Capacity | 1 Chain Falls

Built for controlled manual lifting, pulling, positioning, and rigging, the Ingersoll Rand SLB150-6 Silver Series Lever Chain Hoist provides a 3/4 metric ton (1,650 lb) rated capacity with a 6 ft standard lift and 1 chain fall. Its high-strength, all-stamped steel construction is designed to provide decreased weight and better impact resistance, while the compact lever-hoist design supports operation where working space is limited. The 6 ft lift configuration is confirmed for SKU SLB150-6 by the Intl Air Tool product listing.

The SLB150 requires 41 lb of pull to lift the rated load and uses a 6 x 18 mm premium-grade alloy load chain. Encased and retained roller bearings support efficient operation and ease of maintenance, while double-reduction gearing provides low handle effort and controlled spotting. The automatic inertia brake engages if a load is applied while the hoist is in free-chain mode, helping minimize operator setup error. A short handle and stroke allow 360° operation for rigging in tight spaces.

Type: Lever Chain Hoist | Series: Silver Series | Model: SLB150-6 | Capacity: 3/4 Metric Ton (1,650 lb) | Standard Lift: 6 ft | Chain Falls: 1 | Pull to Lift Rated Load: 41 lb | Load Chain Size: 6 x 18 mm | Chain Weight: 0.5 lb/ft | Minimum Headroom: 13 in

Features:

• High-strength, all-stamped steel construction provides decreased weight and better impact resistance.
• Open-frame design makes cleaning and inspection easier.
• Encased and retained roller bearings support efficient operation and ease of maintenance.
• Premium-grade alloy load chain provides the specified load-chain construction.
• Hardened swivel-latch hooks provide the specified hook configuration.
• Nickel- and chrome-plated exterior and zinc-plated frame components provide increased corrosion resistance.
• Double-reduction gearing provides low handle effort and controlled spotting characteristics.
• Deep lug knobs support easy one-handed operation with or without gloves.
• Short handle and stroke allow 360° operation for rigging in tight spaces.
• Automatic inertia brake engages if a load is applied while the hoist is in free-chain mode, helping minimize operator setup error.
• Double hand-chain guides provide proper hand-chain tracking and smooth operation when pulling excess hand chain.
• Silver Series lever chain hoists meet or exceed ANSI B30.21 standards according to the manufacturer catalog.

Applications:

• Manual load positioning — provides controlled lifting and positioning of loads within the 1,650 lb rated capacity.
• Maintenance and repair — suitable for positioning equipment, components, and machinery where a manual lever hoist is appropriate.
• Rigging in confined areas — the short handle and stroke allow 360° operation where operating space is limited.
• Construction and material handling — provides a 6 ft lift configuration for applications requiring relatively short vertical travel.

FAQs:

• Q: What is the capacity of the SLB150-6?
  A: The SLB150-6 is rated for 3/4 metric ton, equivalent to 1,650 lb.
• Q: What does the 6 ft standard lift specify?
  A: It identifies the SLB150 configuration supplied with 6 ft of lifting travel. The 6 ft configuration is specifically listed for SKU SLB150-6.
• Q: How many chain falls does the SLB150-6 have?
  A: The SLB150 uses 1 chain fall.
• Q: How much pull is required to lift the rated load?
  A: The manufacturer specifies 41 lb of pull to lift the rated load.
• Q: What size load chain does the SLB150 use?
  A: The SLB150 uses a 6 x 18 mm load chain with a listed weight of 0.5 lb per foot.
• Q: What is the minimum headroom?
  A: The manufacturer specifies 13 in minimum headroom for the SLB150.
• Q: Can the hoist be operated in tight spaces?
  A: Yes. Its short handle and stroke allow 360° operation for rigging in tight spaces.
• Q: Does the SLB150-6 have an overload clutch?
  A: No overload clutch is identified as a separate feature for the SLB150 lever hoist in the supplied catalog. The catalog instead specifies an automatic inertia brake that engages when a load is applied in free-chain mode.

Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Hoists for your assembly application, please email info@intlairtool.com or call (800) 608-5210