Ingersoll Rand SLB1200-F Silver Series Lever Chain Hoist | 6 (metric tons) Capacity | Hoist Without Load Chain

Designed for controlled manual lifting, pulling, positioning, and rigging, the Ingersoll Rand SLB1200-F Silver Series Lever Chain Hoist provides a 6 metric ton (13,200 lb) rated capacity in a hoist without load chain configuration. High-strength, all-stamped steel construction provides decreased weight and better impact resistance, while the Silver Series design incorporates features intended to support efficient operation, cleaning, inspection, and maintenance.

The SLB1200 requires 57 lb of pull to lift the rated load and is specified for a 10 x 30 mm load chain weighing 2.9 lb per foot when equipped with compatible chain. Encased and retained roller bearings support increased efficiency and ease of maintenance, while double-reduction gearing provides superior spotting characteristics and low handle effort. An automatic inertia brake engages if a load is applied in free-chain mode, helping minimize operator setup error. The short handle and stroke allow 360° operation for rigging in tight spaces.

Type: Lever Chain Hoist | Series: Silver Series | Model: SLB1200-F | Capacity: 6 Metric Tons (13,200 lb) | Load Chain: Not Included | Chain Falls: 2 | Pull to Lift Rated Load: 57 lb | Specified Load Chain Size: 10 x 30 mm | Chain Weight: 2.9 lb/ft | Minimum Headroom: 25.2 in

Features:

• Supplied without load chain, allowing compatible chain to be selected separately for the intended setup.
• High-strength, all-stamped steel construction provides decreased weight and better impact resistance.
• Open-frame design facilitates cleaning and inspection.
• Encased and retained roller bearings support increased efficiency and ease of maintenance.
• Premium-grade alloy load chain is the specified chain construction for the SLB1200 when equipped with compatible chain.
• Hardened swivel-latch hooks provide the specified hook configuration.
• Nickel- and chrome-plated exterior and zinc-plated frame components provide increased corrosion resistance.
• Double-reduction gearing provides superior spotting characteristics and low handle effort.
• Deep lug knobs facilitate one-handed operation with or without gloves.
• Short handle and stroke allow 360° operation for rigging in tight spaces.
• Automatic inertia brake engages when a load is applied in free-chain mode, helping minimize operator setup error.
• Two chain falls provide the specified lifting configuration for the 6 metric ton SLB1200.
• Silver Series lever chain hoists are CE certified and meet or exceed applicable requirements identified by the manufacturer, including ASME B30.21 and HST-3M.

Applications:

• Heavy manual load positioning — provides controlled lifting and positioning capability within the 13,200 lb rated capacity when properly equipped with compatible load chain.
• Maintenance and repair — suitable for positioning heavy equipment, components, and machinery where a manual lever hoist is appropriate.
• Rigging operations — the two-chain-fall configuration supports the specified 6 metric ton lifting capacity.
• Custom hoist configurations — the chainless version allows compatible load chain to be selected separately for the intended application.
• Confined-space rigging — the short handle and stroke allow 360° operation where operating space is limited.

FAQs:

• Q: What is the capacity of the SLB1200-F?
  A: The SLB1200-F is rated for 6 metric tons, equivalent to 13,200 lb.
• Q: What does “without load chain” mean?
  A: The SLB1200-F is supplied without load chain. A compatible load chain must be obtained separately for the intended application.
• Q: How many chain falls does the SLB1200 use?
  A: The SLB1200 is specified with 2 chain falls.
• Q: What size load chain is specified for the SLB1200?
  A: The manufacturer specifies a 10 x 30 mm load chain for the SLB1200. The SLB1200-F does not include that chain.
• Q: How much pull is required to lift the rated load?
  A: The manufacturer specifies 57 lb of pull to lift the rated load.
• Q: What is the minimum headroom?
  A: The manufacturer specifies 25.2 in minimum headroom for the SLB1200.
• Q: Does the SLB1200-F have a specified lift length?
  A: No specific lift length is established for this chainless configuration in the supplied manufacturer catalog. The catalog provides lift options for configured SLB1200 hoists, while the F configuration is identified as a hoist without load chain.
• Q: Does the SLB1200 have overload protection?
  A: The manufacturer describes overload protection as a standard Silver Series feature, with the clutch slipping in the lifting direction only.

Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Hoists for your assembly application please email info@intlairtool.com or call (800) 608-5210