Ingersoll Rand RT010A Plain Rigid Trolley | 0.25 - 1 (tons) Capacity | Fixed Lug Suspension

Ingersoll Rand RT010A Plain Rigid Beam Trolley provides a twin suspension shaft arrangement for controlled horizontal load movement. Part of the RT Series, this plain trolley accommodates hoist capacities ranging from 0.25 to 1 metric ton (550–2,200 lbs) and fits beam flange widths from 2.7 to 6 inches. Its rigid suspension arrangement provides a direct connection to compatible Ingersoll Rand MLK, MLKS, and MLKR Series air chain hoists. Universal tread wheels accommodate both flat and tapered beam flanges, allowing the trolley to travel along suitable overhead beams without requiring a powered trolley drive.

The RT010A features an all-steel construction with cast iron wheels mounted on permanently greased sealed bearings for smooth rolling movement. Integral rail sweeps, built into the side plates, help clear debris from the wheel travel path. Its 36-inch minimum turning radius allows operation on compatible curved beam sections, while the 5-inch minimum beam height and adjustable flange configuration help accommodate different overhead support arrangements. With a 31 lbs trolley weight, the unit provides a rigid mounting solution for compatible air hoists in manufacturing, assembly, and material-handling operations.

Type: Plain Rigid Beam Trolley | Model: RT010A | Series: RT Series | Capacity: 0.25–1 Metric Ton (550–2,200 lbs) | Suspension Type: Twin Suspension Shaft, Rigid | Beam Flange Width: 2.7–6 in. | Minimum Turning Radius: 36 in. | Minimum Beam Height: 5 in. | Trolley Weight: 31 lbs | Wheel Material: Cast Iron | Beam Compatibility: Flat and Tapered Flanges | Standard: ANSI B30.16

Features:

• Twin suspension shaft construction provides a rigid connection between the trolley and compatible air chain hoists.
• 0.25–1 metric ton capacity range supports compatible hoist arrangements rated from 550 to 2,200 lbs.
• Adjustable beam flange fit from 2.7 to 6 inches accommodates different overhead beam configurations.
• Universal tread wheels are suitable for both flat and tapered beam flanges.
• All-steel construction provides structural support for overhead hoist installations.
• Cast iron wheels with permanently greased sealed bearings support smooth trolley travel along the beam.
• Integral rail sweeps on the side plates help clear the rolling path during trolley movement.
• 36-inch minimum turning radius accommodates suitable curved beam tracks, and the trolley meets ANSI B30.16 hoisting requirements with a minimum 5:1 safety factor.

Applications:

• Manufacturing facilities: Supporting compatible air chain hoists for overhead movement of components between production workstations.
• Industrial assembly lines: Providing rigid trolley suspension for lifting and positioning materials during assembly operations.
• Material handling systems: Allowing suspended loads to travel horizontally along suitable flat or tapered flange beams.
• Equipment maintenance facilities: Supporting compatible hoists used for lifting and moving machinery components during service operations.
• Fabrication workshops: Providing overhead hoist travel for handling workpieces and assemblies within the rated capacity.

FAQs:

• Q: What is the load capacity of the Ingersoll Rand RT010A trolley?
  A: The RT Series trolley supports compatible hoist capacities from 0.25 to 1 metric ton, equivalent to 550–2,200 lbs. The complete lifting system must operate within the rated capacity of its lowest-rated component.
• Q: What beam flange widths are compatible with the RT010A?
  A: The trolley accommodates beam flange widths from 2.7 to 6 inches. Its universal tread wheels are suitable for both flat and tapered beam flanges.
• Q: Which Ingersoll Rand hoists can be used with the RT Series trolley?
  A: The RT Series provides a rigid connection for MLK, MLKS, and MLKR Series air chain hoists. The manufacturer also identifies RT trolleys as available with certain MLK, HLK, and Palair hoist arrangements when specified. The exact suspension configuration should be verified before ordering.
• Q: Does the RT010A require a motor or hand chain for trolley movement?
  A: No. The RT010A is a plain trolley that moves along its supporting beam without an integrated powered travel drive or geared hand-chain mechanism.
• Q: Can the RT010A operate on a curved overhead beam?
  A: Yes, provided the beam configuration is suitable and meets the manufacturer's minimum turning radius of 36 inches. Beam dimensions, loading, and installation requirements must also be verified.

Looking for more information about Ingersoll Rand Plain Rigid Trolley? Click here to view the Catalog.

For help selecting the correct Ingersoll Rand Plain Rigid Trolleys for your assembly application, call (800) 608-5210 or email info@intlairtool.com