Ingersoll Rand PT100G-12 Push Hook-On Geared Trolley | PT Series | 10 Ton Capacity

Ingersoll Rand PT100G-12 is a 10 metric ton (22,000 lb) capacity PT Series Push Hook-On Geared Trolley with a 12 ft hand chain drop. The geared configuration allows the operator to position a suspended load by pulling the hand chain rather than manually pushing the trolley. Its 7–13 in. flange adjustment accommodates compatible larger overhead beams, while the 83 in. minimum curve radius defines the minimum radius for curved beam travel.

The trolley uses cast iron wheels with a universal tread for flat or tapered beams and sealed, lubricated-for-life ball bearings for smoother rolling with reduced maintenance. Cold-formed steel side plates incorporate rail sweeps and drop stops for strength and load distribution, while rivet-locked wheel axles resist loosening. The PT100G-12 requires a 10 in. minimum beam height and has a manufacturer-listed 205 lb trolley weight. The PT Series has a 5:1 design factor and is rated for use with compatible manual or powered hoists.

Type: Push Hook-On Geared Trolley | Series: PT Series | Model: PT100G-12 | Capacity: 10 Metric Tons (22,000 lb) | Wheel Type: Cast Iron | Flange Adjustment: 7–13 in. | Minimum Beam Height: 10 in. | Minimum Curve Radius: 83 in.

Features:

• The geared trolley configuration provides controlled manual positioning of suspended loads along the overhead beam.
• The 5:1 design factor allows the PT Series to be used with both manual and powered hoists.
• Cold-formed steel side plates provide strength, durability, and even load distribution.
• Rail sweeps and drop stops are incorporated into the side-plate construction.
• Rivet-locked wheel axles are secured against loosening during trolley operation.
• Cast iron wheels use a universal tread suitable for flat or tapered beams.
• Sealed, lubricated-for-life ball bearings provide smoother rolling with less effort and maintenance.
• Wide hanger shaft assemblies provide the 7–13 in. flange adjustment required for this trolley configuration.
• PT Series hanger shafts are designed to accept compatible hoists from different brands and accommodate round or squared hook shapes.
• The trolley is painted black for coordination with compatible hoists.

Made in USA:

Applications:

• Heavy industrial material handling — positioning compatible loads up to 22,000 lb along suitable overhead beam systems.
• Industrial maintenance and MRO — controlling the movement of large suspended equipment and components during service and installation work.
• Manufacturing and fabrication — positioning large assemblies and machinery components along compatible overhead beams.
• Heavy equipment handling — using the hand-geared trolley mechanism when controlled manual travel is preferred.
• Overhead lifting systems — pairing the trolley with a compatible manual or powered hoist where the 7–13 in. flange range and 10 metric ton capacity are suitable.

FAQs:

• Q: What is the capacity of the PT100G-12?
  A: The PT100G-12 is rated for 10 metric tons, equivalent to 22,000 lb.
• Q: Is the PT100G-12 part of the PT Series?
  A: Yes. The PT100G-12 is a PT Series Push Hook-On Geared Trolley. It should not be reclassified as a GT Series trolley.
• Q: What does the G in PT100G-12 indicate?
  A: The G identifies the geared configuration, which uses a hand chain to control trolley travel along the beam.
• Q: What does the 12 indicate?
  A: The PT100G-12 configuration has a 12 ft hand chain drop.
• Q: What beam flange width can the PT100G-12 accommodate?
  A: The specified flange adjustment is 7–13 in.
• Q: What type of wheels does the PT100G-12 use?
  A: The standard configuration uses cast iron wheels with a universal tread for flat or tapered beams.
• Q: What is the minimum curve radius?
  A: The minimum specified curve radius is 83 in.

Looking for more information about Ingersoll Rand Push Trolley? Click here to view the Catalog

For help selecting the correct Ingersoll Rand Push Trolleys for your assembly application, call (800) 608-5210 or email info@intlairtool.com