Ingersoll Rand PT100-12 Push Hook-On Trolley | PT Series | 10 (metric tons) Capacity

Ingersoll Rand PT100-12 Push Hook-On Trolley is a 10 metric ton (22,000 lb) capacity PT Series trolley designed to move compatible manual or powered hoists along overhead beams. Its 7–13 in. flange adjustment accommodates larger beam flanges than the lower-capacity PT models, while the 83 in. minimum curve radius defines the minimum radius for compatible curved beam travel. The push hook-on design provides manually controlled trolley movement without a separate powered drive.

The PT100-12 uses cast iron wheels with a universal tread for compatible flat or tapered beams and sealed, lubricated-for-life ball bearings for smoother rolling with reduced maintenance. Cold-formed steel side plates incorporate rail sweeps and drop stops for strength and load distribution, while rivet-locked wheel axles resist loosening. The trolley has a 10 in. minimum beam height and a manufacturer-listed 205 lb weight. Its 5:1 design factor permits use with both manual and powered hoists.

Type: Push Hook-On Trolley | Series: PT Series | Model: PT100-12 | Capacity: 10 Metric Tons (22,000 lb) | Wheel Type: Cast Iron | Flange Adjustment: 7–13 in. | Minimum Beam Height: 10 in. | Minimum Curve Radius: 83 in. | Design Factor: 5:1 | Weight: 205 lb

Features:

• The 5:1 design factor permits use with both manual and powered hoists.
• Cast iron wheels provide the standard wheel configuration for this PT100-12 trolley.
• Universal wheel tread is designed for compatible flat or tapered beams.
• Cold-formed steel side plates provide strength, durability, and even load distribution.
• Rail sweeps and drop stops are incorporated into the side-plate construction.
• Rivet-locked wheel axles are secured against loosening during trolley operation.
• Sealed, lubricated-for-life ball bearings provide smoother rolling with less effort and maintenance.
• The wide hanger shaft assembly provides the 7–13 in. flange adjustment required for this 10 metric ton trolley.
• PT Series hanger shafts are designed to accept hoists from different brands and accommodate compatible round or squared hook shapes.
• The trolley is painted black for universal coordination with compatible hoists.

Made in USA:

Applications:

• Heavy industrial material handling — moving compatible loads up to the 22,000 lb rated capacity along suitable overhead beam systems.
• Industrial maintenance and MRO — suspending and repositioning compatible manual or powered hoists for large equipment and component handling.
• Fabrication and manufacturing — moving large assemblies, machinery components, and materials along compatible overhead beams.
• Heavy equipment handling — providing manually controlled trolley travel for compatible lifting equipment within the rated capacity.
• Large-beam overhead lifting systems — using the 7–13 in. flange range where smaller PT Series trolleys do not provide the required beam adjustment.

FAQs:

• Q: What is the capacity of the PT100-12?
  A: The PT100-12 is rated for 10 metric tons, equivalent to 22,000 lb.
• Q: What beam flange width can the PT100-12 accommodate?
  A: The PT100-12 has a 7–13 in. flange adjustment range.
• Q: What type of wheels does the PT100-12 use?
  A: The standard PT100-12 uses cast iron wheels with a universal tread for compatible flat or tapered beams.
• Q: Can the PT100-12 be used with a powered hoist?
  A: Yes. The PT Series has a 5:1 design factor and is specified for use with both manual and powered hoists.
• Q: What is the minimum beam height for the PT100-12?
  A: The minimum specified beam height is 10 in.
• Q: What is the minimum curve radius?
  A: The minimum specified curve radius is 83 in.
• Q: How much does the PT100-12 weigh?
  A: The manufacturer lists the PT100-12 at 205 lb.

Looking for more information about Ingersoll Rand Push Trolley? Click here to view the Catalog

For help selecting the correct Ingersoll Rand Push Trolleys for your assembly application, call (800) 608-5210 or email info@intlairtool.com