Ingersoll Rand KL100-15 KL Kinetic Series Lever Chain Hoist | 1 Ton Capacity | 15 ft Lift | 1 Chain Falls

Built for controlled manual lifting, pulling, positioning, and rigging, the Ingersoll Rand KL100-15 Kinetic Series Lever Chain Hoist provides a 1 metric ton (2,200 lb) rated capacity with a 15 ft lift and 1 chain fall. All-steel construction, extensive use of bearings, and a compact design make this hoist suitable for manual lifting applications where reduced pull effort and maneuverability are important.

The KL100 requires 66.1 lb of pull to lift the rated load and uses premium-grade 100 electro-galvanized load chain weighing 0.5 lb per foot. Full bearing construction on the load sprocket and pinion shaft helps reduce pull effort and support longer service life, while the reinforced double-pawl brake with large-diameter pawl springs provides a dependable braking system. Heavy-duty cast hook latches, an ergonomic design, and a compact housing further support practical operation in demanding and space-limited lifting applications.

Type: Lever Chain Hoist | Series: Kinetic Series | Model: KL100-15 | Capacity: 1 Metric Ton (2,200 lb) | Lift: 15 ft | Chain Falls: 1 | Pull to Lift Rated Load: 66.1 lb | Load Chain Type: Premium Grade 100 Electro-Galvanized | Chain Weight: 0.5 lb/ft | Shipping Weight with 10' Lift: 13.9 lb

Features:

• All-steel construction provides exceptional durability and light weight.
• Reinforced double-pawl brake with large-diameter pawl springs provides a dependable brake system.
• Full bearing construction on the load sprocket and pinion shaft reduces pull effort and supports longer service life.
• Premium-grade 100 electro-galvanized chain is designed for corrosion resistance and increased durability.
• Heavy-duty cast hook latches are designed to reduce the need for latch replacement.
• Single chain fall provides the specified lifting configuration for the 1 metric ton KL100.
• Compact design accommodates applications where available operating space is limited.
• The Kinetic Series uses an ergonomic design intended to make manual operation more user-friendly.
• Overload clutch is available as an option on all Kinetic Series capacities.
• CE-certified construction meets or exceeds regional requirements including ASME B30.16 and HST-2M, according to the manufacturer catalog.

Applications:

• Manual load positioning — provides controlled lifting and positioning for loads within the 2,200 lb rated capacity.
• Maintenance and repair — suitable for positioning equipment, components, and machinery where a manual lever hoist is appropriate.
• Rigging operations — the single-chain-fall configuration provides the specified lifting arrangement for this capacity.
• Extended-lift material handling — the 15 ft lift provides additional vertical travel for applications requiring more lift than shorter KL100 configurations.
• Confined-space work — the compact Kinetic Series design accommodates applications where available operating space is limited.

FAQs:

• Q: What is the capacity of the KL100-15?
  A: The KL100-15 is rated for 1 metric ton, equivalent to 2,200 lb.
• Q: What does the 15 ft lift indicate?
  A: The 15 in the SKU identifies this KL100 configuration with a 15 ft lift.
• Q: How many chain falls does the KL100-15 have?
  A: The KL100 uses 1 chain fall.
• Q: How much pull is required to lift the rated load?
  A: The manufacturer specifies 66.1 lb of pull to lift the rated load.
• Q: What type of load chain does the KL100-15 use?
  A: The Kinetic Series uses premium-grade 100 electro-galvanized load chain designed for corrosion resistance and increased durability.
• Q: What is the load-chain weight?
  A: The manufacturer lists the KL100 load chain at 0.5 lb per foot.
• Q: What is the shipping weight of the KL100-15?
  A: The manufacturer lists 13.9 lb shipping weight with 10 ft of lift. A separate shipping-weight figure for the 15 ft configuration is not provided in the catalog.
• Q: Does the KL100-15 include an overload clutch?
  A: The manufacturer identifies the overload clutch as an option on all Kinetic Series capacities. The KL100-15 designation does not identify the optional V configuration.
• Q: Can the KL100-15 be used in tight spaces?
  A: Yes. The manufacturer describes the Kinetic Series as compact and suitable for applications where operating space is limited.

Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Hoists for your assembly application, please email info@intlairtool.com or call (800) 608-5210