Ingersoll Rand KL075V-15 KL Kinetic Series Lever Chain Hoist | 0.75 Ton Capacity | 15 ft Lift | 1 Chain Falls | Overload Protection

Designed for controlled manual lifting, pulling, positioning, and rigging, the Ingersoll Rand KL075V-15 Kinetic Series Lever Chain Hoist provides a 0.75 metric ton (1,650 lb) rated capacity with a 15 ft lift, 1 chain fall, and the V overload-clutch option. All-steel construction, full bearing support on the load sprocket and pinion shaft, and a compact design make this hoist suitable for manual lifting applications where reduced pull effort and maneuverability are important.

The KL075 requires 48.3 lb of pull to lift the rated load and uses premium-grade 100 electro-galvanized load chain weighing 0.47 lb per foot. A reinforced double-pawl brake with large-diameter pawl springs provides the specified brake system, while heavy-duty cast hook latches, an ergonomic handle grip, and a compact design support practical operation. The manufacturer identifies the overload clutch as an optional Kinetic Series feature, with the V designation used to specify that option.

Type: Lever Chain Hoist | Series: Kinetic Series | Model: KL075V-15 | Capacity: 0.75 Metric Tons (1,650 lb) | Lift: 15 ft | Chain Falls: 1 | Overload Protection: Overload Clutch | Pull to Lift Rated Load: 48.3 lb | Load Chain Type: Premium Grade 100 Electro-Galvanized | Chain Weight: 0.47 lb/ft | Shipping Weight with 10' Lift: 13.4 lb

Features:

• All-steel construction provides the specified Kinetic Series construction.
• Reinforced double-pawl brake with large-diameter pawl springs provides a highly dependable brake system.
• Full bearing construction on the load sprocket and pinion shaft reduces pull effort and supports longer service life.
• Premium-grade 100 electro-galvanized chain provides corrosion resistance and increased durability.
• Heavy-duty cast hook latches are designed for less latch replacement.
• Corrosion-resistant finish provides additional durability.
• Ergonomic handle grip helps reduce operator fatigue during manual operation.
• Single chain fall provides the specified lifting configuration for the 0.75 metric ton KL075.
• V overload clutch provides the specified overload-protection option for this configuration.
• Compact design accommodates applications where available operating space is limited.
• CE-certified construction meets or exceeds regional requirements including ASME B30.16 and HST-2M, according to the manufacturer catalog.

Applications:

• Manual load positioning — provides controlled lifting and positioning for loads within the 1,650 lb rated capacity.
• Maintenance and repair — suitable for positioning equipment, components, and machinery where a compact manual lever hoist is appropriate.
• Rigging operations — the single-chain-fall configuration provides the specified lifting arrangement for this capacity.
• Extended-lift material handling — the 15 ft lift provides additional vertical travel for applications requiring more lift than shorter KL075 configurations.
• Manual lifting with overload protection — the V configuration adds the specified overload-clutch option for applications where that option is required.

FAQs:

• Q: What is the capacity of the KL075V-15?
  A: The KL075V-15 is rated for 0.75 metric ton, equivalent to 1,650 lb.
• Q: What does the “V” in KL075V-15 indicate?
  A: The V identifies the optional overload clutch in the Kinetic Series ordering system.
• Q: What does the 15 ft lift indicate?
  A: The 15 in the SKU identifies this KL075 configuration with a 15 ft lift.
• Q: How many chain falls does the KL075V-15 have?
  A: The KL075 uses 1 chain fall.
• Q: How much pull is required to lift the rated load?
  A: The manufacturer specifies 48.3 lb of pull to lift the rated load.
• Q: What type of load chain does the KL075 use?
  A: The Kinetic Series uses premium-grade 100 electro-galvanized load chain designed for corrosion resistance and increased durability.
• Q: What is the chain weight?
  A: The manufacturer lists the KL075 load chain at 0.47 lb per foot.
• Q: Does the KL075V-15 include overload protection?
  A: Yes. The V designation specifies the optional overload clutch.
• Q: What is the shipping weight of the KL075V-15?
  A: The manufacturer lists 13.4 lb shipping weight with 10 ft of lift for the KL075. The catalog does not provide a separate shipping-weight figure for the 15 ft configuration.

Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Hoists for your assembly application, please email info@intlairtool.com or call (800) 608-5210