Ingersoll Rand KL075-20 KL Kinetic Series Lever Chain Hoist | 0.75 Ton Capacity | 20 ft Lift | 1 Chain Falls

Designed for controlled manual lifting, pulling, positioning, and rigging, the Ingersoll Rand KL075-20 Kinetic Series Lever Chain Hoist provides a 0.75 metric ton (1,650 lb) rated capacity with a 20 ft lift and 1 chain fall. All-steel construction, a compact design, and bearing-supported operation make this hoist suitable for manual lifting applications where extended vertical travel and maneuverability are important.

The KL075 requires 48.3 lb of pull to lift the rated load and uses premium-grade 100 electro-galvanized load chain weighing 0.47 lb per foot. Full bearing construction on the load sprocket and pinion shaft helps reduce chain pull effort and supports longer service life, while the fused brake disc provides the specified braking design. Heavy-duty cast hook latches, an ergonomic handle grip, and a compact housing further support practical operation in space-limited lifting applications.

Type: Lever Chain Hoist | Series: Kinetic Series | Model: KL075-20 | Capacity: 0.75 Metric Tons (1,650 lb) | Lift: 20 ft | Chain Falls: 1 | Pull to Lift Rated Load: 48.3 lb | Load Chain Type: Premium Grade 100 Electro-Galvanized | Chain Weight: 0.47 lb/ft | Shipping Weight with 10' Lift: 13.4 lb

Features:

• All-steel construction provides the specified Kinetic Series construction.
• Heavy-duty cast hook latches are designed to reduce the need for latch replacement.
• Corrosion-resistant finish provides additional durability.
• Ergonomic handle grip helps reduce operator fatigue during manual operation.
• Single chain fall provides the specified lifting configuration for the 0.75 metric ton KL075.
• Full bearing construction on the load sprocket and pinion shaft reduces chain pull effort and supports longer service life.
• Fused brake disc provides the specified brake design for extended brake life.
• Premium-grade 100 electro-galvanized chain provides the specified corrosion-resistant load-chain construction.
• Compact design accommodates applications where available operating space is limited.
• Overload clutch is available as an option on Kinetic Series capacities.
• CE-certified design meets or exceeds regional requirements identified by the manufacturer, including ASME B30.21 and HST-3M.

Applications:

• Manual load positioning — provides controlled lifting and positioning for loads within the 1,650 lb rated capacity.
• Maintenance and repair — suitable for positioning equipment, components, and machinery where a compact manual lever hoist is appropriate.
• Rigging operations — the single-chain-fall configuration provides the specified lifting arrangement for this capacity.
• Extended-lift material handling — the 20 ft lift provides additional vertical travel for applications requiring a longer lifting range.
• Confined-space work — the compact design helps accommodate applications where available operating space is limited.

FAQs:

• Q: What is the capacity of the KL075-20?
  A: The KL075-20 is rated for 0.75 metric ton, equivalent to 1,650 lb.
• Q: What does the 20 ft lift indicate?
  A: The SKU identifies the KL075 configured with a 20 ft lift.
• Q: How many chain falls does the KL075-20 have?
  A: The KL075 uses 1 chain fall.
• Q: How much pull is required to lift the rated load?
  A: The manufacturer specifies 48.3 lb of pull to lift the rated load.
• Q: What type of load chain does the KL075 use?
  A: The Kinetic Series uses premium-grade 100 electro-galvanized load chain designed for corrosion resistance and durability.
• Q: What is the chain weight?
  A: The manufacturer lists the KL075 load chain at 0.47 lb per foot.
• Q: What is the shipping weight of the KL075-20?
  A: The manufacturer lists 13.4 lb shipping weight with 10 ft of lift. The supplied catalog does not provide a separate shipping-weight figure for the 20 ft configuration.
• Q: Does the KL075-20 include an overload clutch?
  A: The manufacturer identifies the overload clutch as an option on Kinetic Series capacities. It is not identified as included with the KL075-20 designation.
• Q: Can the KL075-20 be used in tight spaces?
  A: Yes. The manufacturer describes the Kinetic Series as having a compact design for tight spaces.

Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Hoists for your assembly application, please email info@intlairtool.com or call (800) 608-5210