Ingersoll Rand KL075-15 KL Kinetic Series Lever Chain Hoist | 0.75 Ton Capacity | 15 ft Lift | 1 Chain Falls

Designed for controlled manual lifting, pulling, positioning, and rigging, the Ingersoll Rand KL075-15 Kinetic Series Lever Chain Hoist provides a 0.75 metric ton (1,650 lb) rated capacity with a 15 ft lift and 1 chain fall. All-steel construction, a compact design, and extensive bearing support make this hoist suitable for manual lifting applications where maneuverability and reduced chain pull effort are important. The manufacturer identifies the KL075 as a 0.75 metric ton, single-chain-fall Kinetic Series lever hoist.

The KL075 requires 48.3 lb of pull to lift the rated load and uses premium-grade 100 electro-galvanized load chain weighing 0.47 lb per foot. Full bearing construction on the load sprocket and pinion shaft is intended to reduce chain pull effort and extend service life, while the fused brake disc provides the specified braking design. Heavy-duty cast hook latches, an ergonomic handle grip, and a compact housing further support operation in space-limited applications.

Type: Lever Chain Hoist | Series: Kinetic Series | Model: KL075-15 | Capacity: 0.75 Metric Tons (1,650 lb) | Lift: 15 ft | Chain Falls: 1 | Pull to Lift Rated Load: 48.3 lb | Load Chain Type: Premium Grade 100 Electro-Galvanized | Chain Weight: 0.47 lb/ft | Shipping Weight with 10' Lift: 13.4 lb

Features:

• All-steel construction provides the specified Kinetic Series construction.
• Heavy-duty cast hook latches are designed for less latch replacement.
• Corrosion-resistant finish provides additional durability.
• Ergonomic handle grip helps reduce operator fatigue during manual operation.
• Single chain fall provides the specified lifting configuration for the 0.75 metric ton KL075.
• Full bearing construction on the load sprocket and pinion shaft reduces chain pull effort and supports longer service life.
• Fused brake disc provides the specified brake design for extended brake life.
• Premium-grade 100 electro-galvanized chain provides the specified corrosion-resistant load-chain construction.
• Compact design accommodates applications where available operating space is limited.
• Overload clutch is available as an option on all Kinetic Series capacities.
• CE-certified design meets or exceeds regional requirements including ASME B30.21 and HST-3M, according to the manufacturer catalog.

Applications:

• Manual load positioning — provides controlled lifting and positioning for loads within the 1,650 lb rated capacity.
• Maintenance and repair — suitable for positioning equipment, components, and machinery where a compact manual lever hoist is appropriate.
• Rigging operations — the single-chain-fall configuration provides the specified lifting arrangement for this capacity.
• Confined-space work — the compact design helps accommodate applications where available operating space is limited.
• Material handling — the 15 ft lift provides additional vertical travel for applications requiring more lift than shorter KL075 configurations.

FAQs:

• Q: What is the capacity of the KL075-15?
  A: The KL075-15 is rated for 0.75 metric ton, equivalent to 1,650 lb.
• Q: What does the 15 ft lift indicate?
  A: The SKU identifies the KL075 configured with a 15 ft lift.
• Q: How many chain falls does the KL075-15 have?
  A: The KL075 uses 1 chain fall.
• Q: How much pull is required to lift the rated load?
  A: The manufacturer specifies 48.3 lb of pull to lift the rated load.
• Q: What type of load chain does the KL075 use?
  A: The Kinetic Series uses premium-grade 100 electro-galvanized load chain designed for corrosion resistance and increased durability.
• Q: What is the chain weight?
  A: The manufacturer lists the KL075 chain at 0.47 lb per foot.
• Q: What is the shipping weight of the KL075-15?
  A: The manufacturer lists 13.4 lb shipping weight with 10 ft of lift. It does not provide a separate shipping-weight figure for the 15 ft configuration.
• Q: Does the KL075-15 include an overload clutch?
  A: The manufacturer states that an overload clutch is optional on all Kinetic Series capacities. The KL075-15 designation does not identify the optional overload-clutch suffix, so it has not been represented as included.
• Q: Can the KL075-15 be used in tight spaces?
  A: Yes. The manufacturer describes the Kinetic Series as having a compact design for the tightest of spaces.

Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Hoists for your assembly application, please email info@intlairtool.com or call (800) 608-5210