Ingersoll Rand HH1-VSW7/8 Hose Swivel Inlet | Heavy-Duty | 7/8" x 24" NPT x 1/2" Hose Barb

Managing compressed-air hose movement is an important consideration when operating pneumatic chipping hammers and construction tools. The Ingersoll Rand HH1-VSW7/8 Heavy-Duty Hose Swivel Inlet provides a swiveling connection between a pneumatic tool and its air supply hose, helping reduce hose twisting and strain as the operator changes working positions. Listed in the manufacturer's Air Line Accessories range, this swivel inlet features a 7/8"-24 threaded connection and a 1/2-inch hose barb. A hose barb is a ribbed connection designed to accept a properly sized flexible hose secured using an appropriate retention method.

The HH1-VSW7/8 is identified by Ingersoll Rand as a heavy-duty swivel inlet, distinguishing it from the general-duty HH1-SW7/8 with the same catalog-listed connection dimensions. Its swiveling arrangement allows relative movement between the hose connection and tool inlet, helping improve hose routing during repeated repositioning. This makes the accessory relevant to chipping, surface preparation, and construction maintenance operations where pneumatic tools are moved frequently. Buyers should verify the exact tool inlet thread and hose dimensions before installation, particularly because the manufacturer's catalog uses an unusual thread notation for this model.

Type: Hose Swivel Inlet | Manufacturer: Ingersoll Rand | Part Number: HH1-VSW7/8 | Duty Type: Heavy-Duty | Catalog Thread Designation: 7/8" x 24" NPT | Hose Barb Size: 1/2" | Connection Style: Threaded Swivel Inlet to Hose Barb | Category: Pneumatic Air Line Accessories

Features:

• Heavy-duty swivel inlet configuration is listed for pneumatic air line accessory applications.
• Swiveling connection allows the hose to move relative to the tool inlet, helping limit twisting during tool repositioning.
• 7/8-inch by 24-thread catalog designation identifies the tool-side connection for fitment verification.
• 1/2-inch hose barb provides a connection point for an appropriately sized compressed-air hose.
• Offers an alternative to a rigid hose connection where tool movement changes the direction of the air supply line.
• Separate heavy-duty and general-duty swivel options allow buyers to match the manufacturer-listed configuration to their equipment requirements.

Note: Other Ingersoll Rand Steels and accessories include Moil Points, Swivel Inlet, Ground Rod Driver, Spark-Resistant Chisels, Flat Chisel, Blanks, Capes, Gouges, Round Noses, Fullers, Caulkings, Tooth Chisels, Paper Box Stripping Chisels, Jack Rods, Bits, Diamond Points, Clay Spades, Cutters, Hoses, Lock Clips, Lock Springs, Rubber Bumpers, Shanks and Washer etc.

Applications:

• Pneumatic chipping hammer setups – connecting a compatible tool inlet to a flexible air supply hose.
• Construction tool maintenance – replacing worn or damaged swivel inlet accessories with the correct manufacturer-specified connection.
• Surface preparation operations – supporting hose movement during chipping and material-removal work.
• Industrial MRO – maintaining pneumatic tool air connections in workshops and construction equipment service departments.

FAQs:

• Q: What does the Ingersoll Rand HH1-VSW7/8 hose swivel inlet do? A: It provides a swiveling air connection between a compatible pneumatic tool and its supply hose. The movement can help reduce twisting and strain at the hose connection when the tool changes position.
• Q: What connection sizes does the HH1-VSW7/8 use? A: The Ingersoll Rand catalog identifies a 7/8-inch by 24 threaded tool-side connection and a 1/2-inch hose barb. The catalog prints the thread designation as 7/8" x 24" NPT; confirm the actual thread form before purchasing or installing the accessory.
• Q: How does the HH1-VSW7/8 differ from the HH1-SW7/8? A: Both have the same published connection description. Ingersoll Rand classifies the HH1-VSW7/8 as heavy-duty and the HH1-SW7/8 as general-duty. The catalog does not provide comparative load ratings or construction details.
• Q: Will this swivel inlet fit every Ingersoll Rand chipping hammer? A: No universal compatibility is established. The tool inlet must match the swivel's exact thread specification, and the hose must be appropriate for the 1/2-inch barb and operating conditions.
• Q: Does this swivel include a hose or hose clamp? A: The catalog identifies the swivel inlet itself but does not specify an included hose, clamp, or other installation accessories. Confirm any required connecting hardware separately.

Looking for more information about Ingersoll Rand Swivel Inlet? Click here to view the Catalog

For help selecting the correct Ingersoll Rand Swivel Inlets, please call (800) 608-5210 or email info@intlairtool.com