Ingersoll Rand G4911 Cordless Tire Buffer | 7/16" Chuck Size | 20 Voltage | (Bare Tool Only, Battery Not Included)

Make tire repair easier with the Ingersoll Rand G4911 IQV20 Cordless Tire Buffer, designed for professional tire shops, fleet maintenance, and mobile service applications. Powered by the 20V IQV20 battery platform, this compact tool features a 7/16" hex quick-change chuck for switching between compatible reaming bits and buffing accessories. Its dedicated two-speed selector provides 1,000 RPM for reaming and 3,000 RPM for buffing, helping technicians prepare tire injuries and repair surfaces at appropriate speeds without the restrictions of an air hose.

The G4911 features a patented angled battery interface for improved access inside smaller tires, a low-profile lever throttle, and a 20-lumen LED work light for better visibility. Ingersoll Rand reports up to 45 tire repair cycles per charge with a 2.5Ah battery, along with up to 25% less noise and 50% less vibration compared with competitive pneumatic tools under its test conditions. Weighing just 1.83 lbs without a battery, the G4911 provides comfortable cordless handling.

Note: The above product image is for illustration purposes only. This product is a Bare Tool only and does not include any batteries and chargers. Please note this before ordering.

Type: Cordless Tire Buffer | Model: G4911 | Series: IQV20 | Configuration: Bare Tool Only | Voltage: 20V DC | Drive Type: Hex Quick Change | Chuck Size: 7/16" | Maximum Free Speed: 3,000 RPM | Lighting: 20-Lumen LED | Water-Resistance Rating: IPX6 | Length: 10.63" (270 mm) | Width: 3.15" (80 mm) | Height Without Battery: 3.94" (100 mm) | Weight Without Battery: 1.83 lbs (0.83 kg) | Sound Power: 74.1 dB(A) | Vibration Level: 1.7 m/s² | Compatible Batteries: BL2012, BL2022 | Battery and Charger: Not Included

Features:

• Dedicated two-speed selector provides separate operating ranges for reaming and buffing, helping technicians avoid using excessive speed during tire repair preparation.
• 7/16" hex quick-change chuck allows fast changes between compatible reaming bits and buffing cones without a conventional chuck key.
• Patented angled battery interface improves tool clearance inside smaller tires and eliminates the maneuverability restrictions associated with an air hose.
• Up to 45 tire repair cycles per charge with a 2.5Ah battery support repeated repair work under manufacturer test conditions.
• Low-profile lever throttle recesses into the slim handle to provide comfortable control during tire surface preparation.
• Bright 20-lumen LED work light illuminates the repair area inside the tire, improving visibility around punctures and innerliner surfaces.
• IPX6-rated construction provides resistance to powerful water jets under test conditions, supporting suitable outdoor service applications.
• Lightweight design and IQV20 battery compatibility make the tool convenient for technicians already using Ingersoll Rand cordless equipment.

Applications:

• Passenger vehicle tire repair – Preparing eligible puncture injuries and buffing innerliner surfaces before applying approved repair materials.
• Commercial tire service – Reaming and buffing suitable repair areas on truck and fleet tires using compatible accessories.
• Heavy equipment tire maintenance – Supporting puncture repair preparation on serviceable equipment tires where cordless mobility improves tool access.
• Mobile tire repair – Performing approved repair preparation procedures without requiring a compressed-air connection.
• Professional tire repair shops – Switching between reaming and buffing operations during repeated tire service procedures.

FAQs:

• Q: What are the operating speeds of the Ingersoll Rand G4911 tire buffer?
  A: The G4911 provides two dedicated speed ranges: 0–1,000 RPM for reaming and 0–3,000 RPM for buffing. These maximum speeds are designed to align with U.S. Tire Manufacturers Association tire repair guidance.
• Q: Does SKU G4911 include a battery and charger?
  A: No. This listing is for the G4911 bare tool only. A compatible IQV20 battery and charger are required for operation and must be purchased separately unless already available. Ingersoll Rand offers a separate G4911-K1 battery kit.
• Q: What size accessories can be used with the G4911?
  A: The tool features a 7/16" hex quick-change chuck. Ingersoll Rand specifies a maximum buffing accessory diameter of 3" and a maximum reaming accessory diameter of 3/8". Use appropriately rated and compatible tire repair accessories.
• Q: How many tire repairs can be completed on one battery charge?
  A: Ingersoll Rand reports up to 45 repair cycles with a fully charged 2.5Ah battery. Actual results depend on the repair process, accessory condition, tire characteristics, and battery condition.
• Q: What is the advantage of the angled battery design?
  A: The angled battery interface positions the battery away from the main working axis, improving clearance and maneuverability when preparing repair areas inside smaller tires.
• Q: Can the G4911 be used for both reaming and buffing?
  A: Yes. Its dedicated speed selector and quick-change chuck support both tasks with compatible accessories. Reaming prepares an eligible puncture injury, while buffing prepares the innerliner surface for the selected repair material. Always follow the tire and repair-material manufacturers' procedures.

Looking for more information about Ingersoll Rand Cordless Tire Buffer? Click here to view the Catalog.

For help choosing the correct Ingersoll Rand Cordless Tire Buffers for your application, please call (800) 608-5210 or email info@intlairtool.com