Ingersoll Rand ES60T High-Torque Inline Electric Screwdriver | 1,000 RPM | 4.4 - 17 (In-lbs) Torque Range

When an assembly process calls for controlled fastener engagement and a deliberate rundown speed, the Ingersoll Rand ES60T High-Torque Inline Electric Screwdriver delivers a 4.4 - 17 in-lb torque range for repetitive screw installation within its rated capacity. Its 1,000 RPM free speed provides a measured fastening rate for production work where slower rundown is preferred over the cycle speed of higher-RPM models. The inline configuration supports direct tool-to-fastener alignment at bench assembly stations and on vertically oriented workpieces.

The ES60T gives production teams an electric fastening option for component installation, enclosure assembly, and other repeated screwdriving tasks. Electric operation avoids the compressed-air connections required by pneumatic screwdrivers, while torque capacity up to 17 in-lb accommodates fastening requirements that exceed the range of lower-torque tools. For manufacturing operations selecting a screwdriver according to joint requirements, fastening speed, and torque capacity, the ES60T provides a focused combination of slower rundown and higher torque output.

Type: High-Torque Inline Electric Screwdriver | Model: ES60T | Configuration: Inline | Free Speed: 1,000 RPM | Torque Range: 4.4 - 17 in-lb

Features: High-torque electric screwdriver configuration supports controlled fastening requirements from 4.4 to 17 in-lb. 1,000 RPM free speed provides measured fastener rundown for repetitive assembly operations where a slower fastening rate suits the production process. Inline body profile supports straight alignment between the screwdriver, bit, and fastener during bench assembly and vertical fastening work. Electric operation eliminates the compressed-air supply, air hose, and air preparation requirements associated with pneumatic fastening tools. Torque capacity up to 17 in-lb supports component installation and production screwdriving tasks within the tool's specified operating range. Provides an alternative to higher-speed screwdriver models when assembly requirements favor slower rundown and increased torque capacity. Made in USA:

Applications:

• Electronics and electrical equipment assembly involving repetitive installation of screws and small fasteners within the rated torque range.
• Appliance and component manufacturing where controlled 1,000 RPM rundown suits the fastening process.
• Light equipment production involving enclosure fastening, hardware installation, and repeated component assembly.
• Bench assembly stations where a straight-body screwdriver helps maintain direct alignment with vertically positioned fasteners.
• Production facilities using electric fastening equipment to avoid compressed-air connections at individual assembly workstations.

FAQs:

• Q: What torque range does the Ingersoll Rand ES60T provide?
  A: The ES60T has a torque range of 4.4 - 17 in-lb. The required fastening torque should fall within this range, with final tool selection based on the fastener, joint characteristics, and production process.
• Q: What is the benefit of the ES60T's 1,000 RPM free speed?
  A: The 1,000 RPM rating provides slower fastener rundown than higher-speed models. This can be useful for assembly processes where production requirements favor a more measured fastening rate.
• Q: Why use an inline screwdriver for production assembly?
  A: An inline screwdriver has a straight body profile that aligns the tool with the fastener axis. This configuration is commonly used at bench stations and for vertically oriented fastening operations.
• Q: Does the ES60T require compressed air?
  A: No. The ES60T is electrically powered and does not require an air compressor, pneumatic hose, or Filter-Regulator-Lubricator equipment.
• Q: What types of fastening work are suited to the ES60T?
  A: The ES60T can be used for repetitive screw installation in electronics assembly, appliance manufacturing, component production, and light manufacturing when the required torque falls within the tool's specified 4.4 - 17 in-lb range.

Looking for more information about the Ingersoll Rand Screwdriver? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Screwdrivers for your application, please call (800) 608-5210 or email info@intlairtool.com