Ingersoll Rand 50189570 5 - 1/2" Clay Spade | 16" Under Collar Length | 1 - 1/4" x 6" Hex Shank

For excavation crews working with firm clay and compacted soil, the Ingersoll Rand 50189570 Clay Spade provides a broad digging attachment for compatible pneumatic pavement breakers and diggers. With a 5-1/2-inch blade width, 16-inch length under the collar, and a 1-1/4" x 6" hex shank, this construction steel is designed for trench digging and trimming. The broad spade profile loosens and shapes soil across a wider working area than a narrow digging chisel, while the hex shank provides the attachment dimensions needed to match the receiving tool. Its larger shank configuration makes it distinct from the smaller clay spades offered in the same Ingersoll Rand product range.

The Ingersoll Rand 50189570 is the largest-shank configuration among the manufacturer's four listed 5-1/2-inch clay spades. With a catalog weight of 11 lbs and a manufacturer box quantity of 5, it is a specific replacement steel for contractors and maintenance departments operating pneumatic digging equipment. The 16-inch under-collar measurement refers to the length beneath the retaining collar, not the full attachment length. This distinction helps buyers compare replacement steels accurately when selecting an accessory for an existing pavement breaker or digger.

Type: Clay Spade | Manufacturer: Ingersoll Rand | Part Number: 50189570 | Category: Pavement Breaker and Digger Steels | Blade Width: 5-1/2" | Length Under Collar: 16" | Shank Size: 1-1/4" x 6" | Shank Type: Hex | Catalog Weight: 11 lbs | Manufacturer Box Quantity: 5 | Application: Trench Digging and Trimming

Features:

• 5-1/2-inch clay spade blade provides a wide working profile for trench digging and trimming operations.
• 16-inch under-collar length provides a defined attachment measurement for selecting compatible replacement construction steels.
• 1-1/4-inch by 6-inch hex shank matches pneumatic tools equipped with the corresponding hex holder and retention arrangement.
• Spade-shaped cutting end is intended for excavation and soil shaping rather than concentrated concrete demolition.
• 11 lb catalog weight identifies this larger-shank version and helps distinguish it from the other clay spades in the series.
• Manufacturer box quantity of five provides a packaging reference for contractor purchasing and maintenance inventory planning.
• Listed alongside three smaller-shank versions, allowing buyers to select the correct connection without changing the specified blade width or under-collar length.

Note: Other Ingersoll Rand Steels and accessories include Bushing tools, Moil Points, Spark-Resistant Chisels, Blanks, Capes, Gouges, Round Noses, Fullers, caulking, Ripper Chisels, Tooth Chisels, Paper Box Stripping Chisels, Carbide-Tipped Drill Steels, Jack Rods, Bits, Diamond Points, Couplers, Cutters, Drivers, Hoses, Lock Clips, Lock Springs, Retainers, Rubber Bumpers, Shanks, steels, and Washers etc.

Applications:

• Trench excavation – loosening and working clay or suitable compacted soil during utility and construction projects.
• Trench wall and bottom trimming – shaping excavation areas with a broad spade-shaped cutting edge.
• Utility installation work – assisting with localized digging where underground services have been identified and protected.
• Construction site preparation – removing soil around designated work areas using a compatible pneumatic digger.
• Municipal maintenance – supporting trenching and excavation tasks performed with appropriately equipped pneumatic breakers.

FAQs:

• Q: What is the Ingersoll Rand 50189570 clay spade used for? A: Ingersoll Rand identifies this 5-1/2-inch clay spade for trench digging and trimming. The broad blade is intended to work and shape soil, making it different from a pointed demolition steel or narrow chisel.
• Q: What shank does the 50189570 require? A: It has a 1-1/4-inch by 6-inch hex shank. The pneumatic tool must have a matching holder and appropriate retainer. Blade width alone is not sufficient to determine tool compatibility.
• Q: How does the 50189570 compare with the 50189562? A: Both have a 5-1/2-inch blade and a 16-inch under-collar length. The 50189570 uses a 1-1/4-inch by 6-inch hex shank and weighs 11 lbs, while the 50189562 uses a 1-1/8-inch by 6-inch hex shank and weighs 8.5 lbs.
• Q: Is 16 inches the overall length of this attachment? A: No. The manufacturer lists 16 inches as the length under the collar. This describes the portion below the retaining collar rather than the full overall length of the steel.
• Q: Does the box quantity of five mean five clay spades are included with every order? A: The catalog specifies five as the manufacturer's box quantity. It does not independently establish whether a distributor sells this item individually or by the full box. Confirm the selling unit before ordering.

Looking for more information about Ingersoll Rand Clay Spade? Click here to view the Catalog

For help selecting the correct Ingersoll Rand Clay Spades, please call (800) 608-5210 or email info@intlairtool.com