Ingersoll Rand 41SD17LTQ4 Inline Pneumatic Air Screwdriver | 1,700 RPM | 65 (in-lbs) Torque Range | Stall Clutch

For assembly operations requiring controlled screw rundown with greater torque capability, the Ingersoll Rand 41SD17LTQ4 Inline Pneumatic Air Screwdriver delivers a 1,700 RPM free speed and a 0–65 in-lbs (0–7.3 Nm) torque range. Part of the Ingersoll Rand 41 Series, this tool features a stall clutch (direct-drive mechanism) that allows the air motor to continue driving until fastener resistance causes it to stall. This configuration suits soft-pull fastening applications, such as wood assembly and self-tapping screw installation, where critical torque control is not required. The 1/4-inch hex quick-change spindle accommodates compatible screwdriver bits and simplifies changes between fastening operations.

Built for repetitive pneumatic fastening, the 41SD17LTQ4 combines an inline body with lever-start actuation and a simple push-button reverse control. Its Skinsulate housing provides a comfortable grip surface that requires less force and pressure during operation. Measuring 8.9 inches in overall length and weighing 2.3 lbs, the screwdriver can be positioned along the fastener axis for straight-access assembly work. With 20 CFM air consumption and a 1/4-inch NPT air inlet, it can be integrated into a suitably sized compressed-air system. Compared with the 2,500 RPM 41SD25LTQ4, this model offers greater maximum torque at a lower free speed.

Type: Pneumatic Air Screwdriver | Series: 41 Series | Model: 41SD17LTQ4 | Configuration: Inline | Clutch Type: Stall / Direct Drive | Actuation: Lever Start | Torque Range: 0–65 in-lbs (0–7.3 Nm) | Free Speed: 1,700 RPM | Drive Size: 1/4" | Spindle Type: Hex Quick Change | Overall Length: 8.9" (226 mm) | Side to Center Distance: 0.8" (20 mm) | Weight: 2.3 lbs (1.0 kg) | Air Consumption: 20 CFM (565 L/min) | Air Inlet: 1/4" NPT | Minimum Hose Size: 5/16" | Sound Level: 78 dB(A)

Features:

• Stall-type direct-drive mechanism allows the air motor to run until fastening resistance causes it to stall, providing consistent operation on suitable soft-pull joints.
• 1,700 RPM free speed supports efficient screw rundown during repetitive assembly operations.
• 0–65 in-lbs torque capability accommodates fastening tasks requiring greater driving resistance than lower-torque models.
• Skinsulate housing provides a comfortable grip surface, requiring less force and pressure during operation.
• Inline configuration helps maintain direct alignment between the screwdriver spindle and fastener during installation.
• Lever-start actuation provides straightforward tool control during production fastening cycles.
• Simple push-button reverse enables convenient changes in rotational direction for driving and removing screws.
• 1/4-inch hex quick-change spindle simplifies switching between compatible screwdriver bits without a conventional drill chuck.

Made in USA 

Applications:

• Furniture and woodworking assembly – driving screws into wooden panels, frames, and manufactured wood components.
• Manufacturing and production lines – repetitive screw installation at assembly benches and workstations.
• Self-tapping fastener installation – driving compatible screws into materials where resistance changes during the fastening cycle.
• Equipment and component assembly – securing threaded parts in applications without critical torque-control requirements.
• General industrial maintenance – installing and removing suitable threaded fasteners during routine assembly and repair operations.

FAQs:

• Q: What is the maximum torque of the Ingersoll Rand 41SD17LTQ4?
  A: The screwdriver has a rated maximum torque of 65 in-lbs (7.3 Nm). Actual tightening torque depends on air pressure, joint resistance, and operating conditions. This rating should not be treated as a calibrated torque setting.
• Q: What does a stall clutch do on this pneumatic screwdriver?
  A: The stall-type direct-drive mechanism continues rotating until resistance from the fastener causes the motor to stall. Unlike an automatic shut-off clutch, it does not disengage at a calibrated preset torque. This makes it appropriate for noncritical fastening applications.
• Q: How does the 41SD17LTQ4 compare with the 41SD25LTQ4?
  A: The 41SD17LTQ4 provides 65 in-lbs maximum torque at 1,700 RPM, while the 41SD25LTQ4 provides 45 in-lbs maximum torque at 2,500 RPM. Choose the 41SD17LTQ4 for greater torque capability or the 41SD25LTQ4 when higher free speed is the priority.
• Q: What air supply is required to operate this screwdriver?
  A: The manufacturer specifies 20 CFM air consumption, a 1/4-inch NPT air inlet, and a minimum hose size of 5/16 inch. The compressor and air distribution system should meet the manufacturer's operating pressure and airflow recommendations.
• Q: Can the 41SD17LTQ4 be used for precision torque-controlled assembly?
  A: This model is intended for applications that do not require critical torque control. For fastening processes with specified torque tolerances, an appropriate adjustable shut-off clutch screwdriver is a better choice.

Looking for more information about the Ingersoll Rand Air Screwdriver? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Air Screwdrivers for your application, please call (800) 608-5210 or email info@intlairtool.com