Ingersoll Rand 41SC17PSQ4 Inline Pneumatic Screwdriver | 1,700 RPM | 9.7 - 60.2 (in-lbs) Torque Range | Adjustable Cushion Clutch

When assembly work requires fast screw installation with straightforward tool activation, the Ingersoll Rand 41SC17PSQ4 Inline Pneumatic Screwdriver delivers controlled fastening performance for repetitive manufacturing operations. Part of the 41 Series, this air-powered screwdriver features a 1,700 RPM free speed for efficient fastener rundown and an adjustable 9.7–60.2 in-lbs (1.1–6.8 Nm) torque range for tightening screws in mechanical assemblies, equipment housings, and manufactured components. Its adjustable cushion clutch is a torque-limiting mechanism that helps reduce vibration and torque reaction as the fastener reaches the selected tightening level. The push-to-start actuation activates the tool when forward pressure is applied to the fastener, eliminating the need to operate a separate throttle lever during fastening.

The 41SC17PSQ4 combines its inline configuration with a 1/4-inch hex quick-change spindle, allowing operators to maintain direct fastener alignment while changing compatible screwdriver bits between assembly tasks. A simple push-button reverse provides convenient directional control when removing or repositioning screws. Its Skinsulate housing offers a comfortable gripping surface that requires less gripping force during repeated operation. With a 10.9-inch overall length and 3.1 lb tool weight, the screwdriver is suited to bench assembly and production workstations where repeated fastening is required. Ingersoll Rand reports that the 41 Series has been tested to one million cycles without failure, supporting its use in manufacturing environments with frequent tool operation.

Type: Inline Pneumatic Screwdriver | Model: 41SC17PSQ4 | Series: 41 Series | Clutch Type: Adjustable Cushion Clutch | Actuation: Push-to-Start | Free Speed: 1,700 RPM | Torque Range: 9.7–60.2 in-lbs (1.1–6.8 Nm) | Drive Size: 1/4" | Spindle Type: Hex Quick Change | Length: 10.9" (277 mm) | Weight: 3.1 lbs (1.4 kg) | Side-to-Center Distance: 0.8" (20 mm) | Air Consumption: 20 CFM | Air Inlet: 1/4" NPT | Sound Level: 78 dB(A) at Free Speed | Inlet Location: Standard

Features:

• Push-to-start actuation activates the screwdriver through forward pressure against the fastener, allowing tool operation without a separate throttle lever.
• Adjustable cushion clutch provides torque-limiting control while helping reduce vibration and torque reaction during repetitive screw installation.
• 1,700 RPM free speed supports efficient screw rundown in manufacturing and production assembly operations.
• 1/4-inch hex quick-change spindle allows convenient screwdriver bit replacement when switching between compatible fastener types.
• Simple push-button reverse enables directional changes for screw installation, removal, and fastener repositioning.
• Skinsulate housing provides a comfortable gripping surface that requires less gripping force during repeated use.
• Well-balanced inline configuration supports direct tool alignment with fasteners during workstation assembly.
• 41 Series construction has been tested to one million cycles without failure, demonstrating durability under repeated operation.

Made in USA:

Applications:

• Production assembly lines: Repetitive screw fastening at workstations where push-to-start operation simplifies tool activation.
• Appliance manufacturing: Installing threaded fasteners in appliance housings, covers, brackets, and internal mechanical assemblies.
• Automotive component assembly: Fastening suitable screws in interior components, trim assemblies, and manufactured subassemblies.
• Equipment and machinery manufacturing: Installing machine screws in mechanical components, mounting brackets, and equipment panels.
• Industrial maintenance and workshop assembly: Reinstalling compatible threaded fasteners during component servicing and repair operations.

FAQs:

• Q: How does push-to-start operation work on the Ingersoll Rand 41SC17PSQ4?

  A: The push-to-start mechanism activates the screwdriver when the operator applies forward pressure against the fastener. This eliminates the need to squeeze a separate throttle lever and makes the tool convenient for repeated fastening operations at assembly workstations.

• Q: What is the difference between the 41SC17PSQ4 and 41SC17LTQ4?

  A: Both models feature a 1,700 RPM free speed, adjustable cushion clutch, and the same published torque range. The main difference is actuation: the 41SC17PSQ4 uses push-to-start operation, while the 41SC17LTQ4 features a lever throttle. The preferred model depends on the operator's fastening method and workstation requirements.

• Q: Does the adjustable cushion clutch automatically stop the screwdriver?

  A: No. The cushion clutch limits transmitted torque but is not the same as an automatic shut-off clutch. For applications requiring automatic motor shut-off at a selected tightening torque, consider an Ingersoll Rand screwdriver equipped with a shut-off clutch.

• Q: What type of screwdriver bits fit the 41SC17PSQ4?

  A: This model uses a 1/4-inch hex quick-change spindle. Choose bits with a compatible shank and the correct fastening tip for the screws being installed. Verify bit suitability for the application before operation.

• Q: What compressed air supply is required for this screwdriver?

  A: The manufacturer lists air consumption at 20 CFM with a 1/4-inch NPT air inlet. The compressor and air distribution system should provide sufficient airflow at the recommended operating pressure, particularly when the screwdriver is used repeatedly throughout a production shift.

Looking for more information about the Ingersoll Rand Screwdriver? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Screwdrivers for your application, please call (800) 608-5210 or email info@intlairtool.com