Ingersoll Rand 36QMAX Ultra-Compact Air Impact Wrench | Pistol Grip | 1/2" Drive Size | 8000 RPM | 470 (ft-lbs) Max Torque

When stubborn fasteners are tucked inside crowded engine compartments, suspension assemblies, or other difficult-to-reach areas, the Ingersoll Rand 36QMAX Ultra-Compact Air Impact Wrench provides high torque output in a short, maneuverable design. Featuring a 1/2-inch drive and delivering up to 470 ft-lbs (640 Nm) of maximum reverse torque, this pneumatic impact wrench helps technicians remove and install fasteners where larger tools may be difficult to position. It also produces 640 ft-lbs (870 Nm) of nut-busting torque (maximum breakaway capability for loosening resistant fasteners). Its 4.6-inch (117 mm) overall length provides access around obstructions, while the 8,000 RPM free speed supports quick fastener removal and installation during automotive repair and equipment maintenance.

The 36QMAX incorporates a twin-hammer impact mechanism, which uses two hammers to deliver rotational impacts to the drive for efficient torque transfer. A one-handed forward/reverse push button makes changing rotational direction convenient, while the 3-mode power regulator allows technicians to select an appropriate power setting for different fastening tasks. Its compact pistol-grip construction provides a practical combination of reach, handling, and fastening capability for technicians working around suspension components, engine bays, and subframe bolts. Ingersoll Rand reports that the tool has been tested to achieve twice the service life of competitive products under its test conditions.

Type: Ultra-Compact Air Impact Wrench | Model: 36QMAX | Configuration: Pistol Grip | Actuation: Trigger | Drive Size: 1/2" | Impact Mechanism: Twin Hammer | Forward Torque: 380 ft-lbs (520 Nm) | Maximum Reverse Torque: 470 ft-lbs (640 Nm) | Nut-Busting Torque: 640 ft-lbs (870 Nm) | Free Speed: 8,000 RPM | Blows Per Minute: 1,300 BPM | Length: 4.6" (117 mm) | Width: 2.4" (60 mm) | Height: 7.1" (181 mm) | Air Inlet: 1/4" | Minimum Hose Size: 3/8" (10 mm) | Air Consumption at Load: 19 CFM (538 L/min) | Impacting Sound Pressure: 91.3 dB(A) | Vibration Level: 8.1 m/s² | Manufacturer Flyer Weight: 2.4 lbs (1.1 kg)

Features:

• Ultra-compact 4.6-inch overall length improves access to fasteners around suspension systems, engine components, and other confined mechanical assemblies.
• Provides 640 ft-lbs of nut-busting torque for loosening stubborn bolts and nuts during automotive and equipment maintenance.
• Twin-hammer impact mechanism delivers rotational impact energy for efficient fastening and removal operations.
• One-handed forward/reverse push button allows operators to change rotational direction without complicated adjustments.
• 3-mode power regulator provides selectable power control for different fastening requirements.
• 8,000 RPM free speed supports rapid fastener rundown and removal when resistance is low.
• Compact pistol-grip configuration provides convenient handling when approaching fasteners from different positions.
• Manufacturer durability testing indicates twice the service life of competitive products under its testing conditions.

Tech Tip: To increase tool performance, extend tool life and lessen repair costs use it with a Filter-Regulator-Lubricator (FRLs)

Applications:

• Automotive suspension repair: Removing and installing bolts around suspension components, brackets, and other areas with limited tool clearance.
• Engine bay maintenance: Accessing fasteners near engine accessories and mechanical components where a full-size impact wrench may be difficult to position.
• Subframe and chassis service: Loosening and installing subframe bolts and other suitable vehicle fasteners during repair and maintenance.
• Automotive wheel service: Removing compatible wheel lug nuts and assisting with wheel-related maintenance within the tool's torque capabilities.
• Fleet maintenance and repair workshops: Performing general fastening and removal tasks on vehicles and equipment where compact pneumatic tools improve accessibility.

FAQs:

• Q: What is the difference between 470 ft-lbs of maximum reverse torque and 640 ft-lbs of nut-busting torque?
  A: The 470 ft-lbs rating represents the manufacturer's maximum reverse torque specification. The 640 ft-lbs nut-busting rating describes the tool's maximum breakaway capability for loosening stubborn fasteners. These are separate performance measurements and should not be treated as identical. The manufacturer also specifies 380 ft-lbs of forward torque.
• Q: Can the Ingersoll Rand 36QMAX reach tight spaces around an engine or suspension?
  A: Yes. Its 4.6-inch overall length makes it particularly useful around engine compartments, suspension components, and subframe assemblies. Actual accessibility depends on the fastener location, socket length, and surrounding clearance.
• Q: What air compressor is needed for the 36QMAX?
  A: The manufacturer specifies 19 CFM air consumption at load, a 1/4-inch air inlet, and a minimum 3/8-inch hose size. The published flyer specifies performance at 90 PSI (6.2 bar). Choose a compressor and air delivery system that can provide the required pressure and airflow during the intended duty cycle.
• Q: How does the 3-mode power regulator help during fastening?
  A: The 3-mode regulator allows operators to select different power settings instead of using maximum output for every task. This can be helpful when moving between fasteners with different resistance levels. Always use a calibrated torque wrench for final tightening when a specific torque value is required.
• Q: What is the difference between the Ingersoll Rand 36QMAX and 15QMAX?
  A: The 36QMAX features a 1/2-inch drive, 470 ft-lbs of maximum reverse torque, and 640 ft-lbs of nut-busting torque. The 15QMAX uses a 3/8-inch drive and provides 380 ft-lbs of maximum reverse torque and 475 ft-lbs of nut-busting torque. Both have a 4.6-inch overall length, but the 36QMAX offers higher torque output and a larger drive size.

Ingersoll Rand 36QMAX Impact Wrench Parts List

Looking for more information about Ingersoll Rand Air Impact Wrench? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Air Impact Wrenches for your application, please call (800) 608-5210 or email info@intlairtool.com