Ingersoll Rand 2135QXPA Pneumatic Impact Wrench | 1/2" Square Drive | 11,000 RPM | 780 (ft-lbs) Max Torque

From stubborn automotive fasteners to equipment repair and facility maintenance, the Ingersoll Rand 2135QXPA Pneumatic Impact Wrench combines substantial fastening power with a compact, lightweight pistol grip configuration. Equipped with a 1/2" square drive with hog-ring retention, this air impact wrench delivers 780 ft-lbs (1,057 Nm) of maximum reverse torque and 1,100 ft-lbs (1,490 Nm) of nut-busting torque (the maximum loosening capability for breaking stubborn fasteners free). Its twin-hammer impact mechanism uses two hammers to deliver repeated rotational impacts, helping remove tight bolts without requiring the operator to supply the full turning force manually. With an 11,000 RPM free speed, the 2135QXPA supports rapid fastener rundown during automotive servicing, machinery repair, and general industrial maintenance.

Built on the established 2135 impact wrench platform, the Ingersoll Rand 2135QXPA features a reverse-bias seven-vane air motor that emphasizes torque delivery in reverse, where additional loosening force is often needed. Its four-position power regulator allows output adjustment for different fastening tasks, while a one-hand forward/reverse push button simplifies direction changes. Ingersoll Rand's Quiet Tool Technology reduces operating noise without sacrificing rated power. Weighing just 4.0 lbs (1.8 kg) and measuring approximately 7.5" (190 mm) long, the wrench is manageable for repeated handheld work. A 1/4" air inlet, 3/8" minimum air hose size, and 5 CFM average air consumption provide the key requirements for selecting an appropriate compressed-air supply.

Type: Pneumatic Impact Wrench | Model: 2135QXPA | Configuration: Pistol Grip | Actuation: Trigger | Drive Size: 1/2" | Drive Type: Square, Hog-Ring | Impact Mechanism: Twin Hammer | Maximum Forward Torque: 700 ft-lbs (949 Nm) | Maximum Reverse Torque: 780 ft-lbs (1,057 Nm) | Nut-Busting Torque: 1,100 ft-lbs (1,490 Nm) | Free Speed: 11,000 RPM | Blows Per Minute: 1,250 | Weight: 4.0 lbs (1.8 kg) | Length: 7.5" (190 mm) | Impacting Sound Pressure: 90.7 dB(A) | Air Inlet: 1/4" | Minimum Hose Size: 3/8" (10 mm) | Average Air Consumption: 5 CFM (142 L/min) | Operating Pressure: 90 PSI (6.2 bar)

Features:

• Twin-hammer impact mechanism delivers repeated rotational impacts to loosen and tighten fasteners during automotive and equipment maintenance.
• 780 ft-lbs maximum reverse torque provides substantial loosening power for tight bolts, while 1,100 ft-lbs nut-busting torque addresses stubborn fasteners.
• Reverse-bias seven-vane motor emphasizes torque delivery in reverse for fastener removal applications.
• Four-position power regulator allows adjustment of power output to suit the fastening task.
• One-hand forward/reverse push button enables convenient direction changes without repositioning the tool.
• Quiet Tool Technology reduces operating noise without sacrificing the manufacturer's rated power output.
• Lightweight 4.0 lb construction helps limit the amount of tool weight handled during repetitive service operations.
• Hog-ring square drive retains compatible impact sockets while allowing socket changes during maintenance work.

Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator (FRL)

Applications:

• Automotive repair and tire service – Removing and installing wheel fasteners, suspension bolts, and other suitable automotive hardware.
• Fleet and vehicle maintenance – Servicing fasteners on light trucks, service vehicles, and fleet equipment where a 1/2" drive impact wrench is appropriate.
• Heavy equipment repair – Loosening accessible machinery fasteners and supporting mechanical component removal within the tool's torque capability.
• Industrial maintenance and MRO – Removing bolts from equipment housings, machinery guards, brackets, and mechanical assemblies.
• Mechanical workshops and garages – Performing general nut and bolt removal, equipment servicing, and repair work using properly sized impact sockets.

FAQs:

• Q: What is the difference between the 780 ft-lbs maximum torque and 1,100 ft-lbs nut-busting torque?
  A: The 780 ft-lbs rating refers to the manufacturer's maximum reverse torque specification, while 1,100 ft-lbs is the nut-busting torque rating for loosening stubborn fasteners. Maximum forward torque is separately specified at 700 ft-lbs. These figures should not be treated as interchangeable or as recommended tightening torque settings.
• Q: What size air compressor is needed for the Ingersoll Rand 2135QXPA?
  A: The current manufacturer specification lists 5 CFM average air consumption at a 90 PSI operating pressure, with a 1/4" air inlet and minimum 3/8" hose. When selecting a compressor, account for the tool's actual duty cycle and pressure losses through hoses, fittings, and air preparation equipment. Do not confuse average consumption with the instantaneous airflow required during operation.
• Q: Does the 2135QXPA use a hog-ring or pin-retainer anvil?
  A: Model 2135QXPA has a 1/2" square drive with hog-ring socket retention, which uses a retaining ring to hold the socket on the anvil. The related 2135PQXPA uses a pin-retainer configuration. Select the version that matches your socket retention preference and service requirements.
• Q: Can the 2135QXPA be used for tightening vehicle lug nuts?
  A: Yes, it can be used for compatible wheel-fastener installation and removal. However, an impact wrench should not be relied upon to establish the vehicle manufacturer's final tightening torque. Finish tightening with a calibrated torque wrench to the vehicle manufacturer's final tightening torque, per the applicable specifications.
• Q: Is the Ingersoll Rand 2135QXPA suitable for regular garage and maintenance work?
  A: Yes. Ingersoll Rand identifies general automotive service, general industrial work, heavy equipment repair, and facility maintenance as applications for the 2135QXPA Series. Its 1/2" square drive, compact pistol grip configuration, and adjustable power regulator make it useful for appropriately sized service fasteners.

  Looking for more information about the Ingersoll Rand Impact Wrench? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Impact Wrenches, please call (800) 608-5210 or email info@intlairtool.com