Ingersoll Rand 2135QXPA-2 Pneumatic Impact Wrench | 1/2" Square Drive | 11,000 RPM | 780 (ft-lbs) Max Torque

When wheel fasteners, recessed bolts, or machinery components are difficult to reach with a standard impact wrench, the Ingersoll Rand 2135QXPA-2 Pneumatic Impact Wrench provides additional access through its 2" extended anvil. This pistol-grip air impact wrench combines a 1/2" square drive with hog-ring socket retention, 780 ft-lbs (1,057 Nm) of maximum reverse torque, and 1,100 ft-lbs (1,490 Nm) of nut-busting torque for removing stubborn fasteners. Nut-busting torque refers to the tool's maximum fastener-loosening capability under specified test conditions. Its twin-hammer impact mechanism delivers repeated rotational impacts to transfer torque to the fastener while limiting the continuous reaction force experienced with conventional non-impact tools. The extended anvil helps position compatible sockets farther into recessed mounting locations, making this configuration particularly useful for automotive service, fleet maintenance, equipment repair, and general industrial fastening.

The Ingersoll Rand 2135QXPA-2 operates at 11,000 RPM free speed (rotational speed without fastening resistance) and delivers 1,250 blows per minute for rapid fastener rundown and removal. Ingersoll Rand's Quiet Technology reduces operating noise without sacrificing the manufacturer's rated power, while the tool's 4.3 lb (1.9 kg) weight keeps the extended-anvil model relatively manageable for handheld servicing. Measuring 9.5" (241 mm) in overall length, it provides approximately two inches of additional reach compared with the standard 2135QXPA. The wrench operates at a specified 90 PSI (6.2 bar) and uses a 1/4" NPTF air inlet with a 3/8" minimum hose diameter. Its extended drive configuration gives maintenance technicians additional working clearance without requiring a separate socket extension for every applicable fastening task.

Type: Pneumatic Impact Wrench | Model: 2135QXPA-2 | Series: 2135QXPA | Handle: Pistol Grip | Actuation: Trigger | Drive Size: 1/2" | Drive Type: Square, Hog-Ring | Anvil Configuration: 2" Extended | Impact Mechanism: Twin Hammer | Maximum Forward Torque: 700 ft-lbs (949 Nm) | Maximum Reverse Torque: 780 ft-lbs (1,057 Nm) | Nut-Busting Torque: 1,100 ft-lbs (1,490 Nm) | Free Speed: 11,000 RPM | Blows Per Minute: 1,250 | Weight: 4.3 lbs (1.9 kg) | Length: 9.5" (241 mm) | Impacting Sound Pressure: 90.7 dB(A) | Air Inlet: 1/4" NPTF | Minimum Hose Size: 3/8" (10 mm) | Average Air Consumption: 5.8 CFM (164 L/min), catalog rating | Operating Pressure: 90 PSI (6.2 bar)

Features:

• 2" extended anvil provides additional reach for recessed fasteners and fastening locations where a standard-length anvil offers limited access.
• 1/2" square drive with hog-ring retention helps hold compatible impact sockets securely while permitting socket changes during service work.
• 780 ft-lbs maximum reverse torque and 1,100 ft-lbs nut-busting torque provide substantial loosening capability for stubborn automotive and equipment fasteners.
• Twin-hammer impact mechanism delivers repeated rotational impacts for fastening and fastener removal applications.
• 11,000 RPM free speed and 1,250 blows per minute support rapid socket rotation and impact action during maintenance operations.
• Ingersoll Rand Quiet Technology reduces operating noise without compromising the manufacturer's rated power.
• 4.3 lb tool weight provides an extended-anvil configuration without the weight associated with many larger impact wrench models.
• 2135QXPA Series construction incorporates manufacturer-tested components and mechanisms for reliability during repeated service operations.

Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator (FRL)

Applications:

• Automotive repair and tire service – Removing and installing wheel fasteners and accessible suspension hardware where additional socket reach is beneficial.
• Fleet and commercial vehicle maintenance – Servicing recessed fasteners on trucks, service vehicles, and mechanical assemblies using appropriately sized impact sockets.
• Heavy equipment repair – Reaching bolts on machinery brackets, equipment housings, and mechanical components where a standard anvil may provide insufficient clearance.
• Industrial maintenance and MRO – Removing fastening hardware during pump, motor, machinery, and facility equipment servicing.
• Mechanical workshops and garages – Loosening stubborn nuts and bolts during general vehicle repair, equipment refurbishment, and maintenance projects.

FAQs:

• Q: What is the difference between the Ingersoll Rand 2135QXPA and 2135QXPA-2?
  A: The primary difference is the anvil configuration. The 2135QXPA-2 features a 2" extended anvil and measures 9.5" overall, while the standard 2135QXPA has a shorter anvil and measures approximately 7.4" in the manufacturer's catalog. Both models provide 780 ft-lbs maximum reverse torque, 1,100 ft-lbs nut-busting torque, and 11,000 RPM free speed. The extended version weighs 4.3 lbs compared with 4.0 lbs for the standard model.
• Q: Why would I choose a 2-inch extended-anvil impact wrench?
  A: An extended anvil positions the socket farther from the wrench body, helping operators reach fasteners located inside recessed wheel assemblies or around obstructing components. This can reduce the need for a separate extension in certain applications. Always ensure the socket can engage the fastener properly and that sufficient clearance exists for safe operation.
• Q: What is the difference between maximum reverse torque and nut-busting torque?
  A: Maximum reverse torque is the manufacturer's rated reverse torque output, listed at 780 ft-lbs for this model. Nut-busting torque is a separate loosening-performance measurement, rated at 1,100 ft-lbs. Neither value represents a precise final tightening torque, so use a calibrated torque wrench when a fastener must meet a specified tightening requirement.
• Q: What compressor and air hose does the 2135QXPA-2 require?
  A: Ingersoll Rand's impact tools catalog specifies 5.8 CFM average air consumption at 90 PSI, a 1/4" NPTF air inlet, and a minimum 3/8" hose diameter. Current manufacturer product data lists 5 CFM average consumption. Select a compressor based on actual tool usage, required operating pressure, and sufficient airflow during impact operation rather than average consumption alone.
• Q: Does the 2135QXPA-2 work with standard 1/2-inch impact sockets?
  A: The tool uses a 1/2" square drive with hog-ring retention and accepts compatible 1/2" drive impact-rated sockets. Socket depth, clearance, and retention fit should be checked for the application. Do not use ordinary hand-tool sockets in place of impact-rated sockets.

Looking for more information about Ingersoll Rand Impact Wrench? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Impact Wrenches, please call (800) 608-5210 or email info@intlairtool.com