When front-end repairs, heavy exhaust work, and stubborn component removal require a longer hammer stroke, the Ingersoll Rand 132 Super Duty Air Hammer provides powerful pneumatic impact action for automotive and mechanical maintenance. Operating at 1,725 blows per minute (BPM) with a 4-inch (102 mm) piston stroke, this air hammer delivers repeated linear impacts for riveting, king pin removal, bushing driving, and bolt shearing. The long stroke refers to the distance the internal piston travels during operation, supporting forceful hammering action for suitable repair tasks. Its 0.56-inch (14 mm) bore diameter and round-shank configuration make the 132 a practical choice for technicians working with compatible chisels and driving accessories.
The Ingersoll Rand 132 features an alloyed steel barrel and heat-treated piston to help withstand repetitive impacts during workshop use. A built-in power regulator allows operators to adjust hammer output according to the application, while trigger control provides direct operation when separating components or removing material. Measuring 8.5 inches (216 mm) in overall length and weighing 3.4 lbs (1.54 kg), the tool offers a manageable pistol-grip configuration for automotive repair bays and mechanical workshops. Its 1/4-inch NPTF air inlet, 3/8-inch minimum hose size, and 11 CFM air consumption at load provide the key specifications for selecting an appropriate compressed-air supply.
Type: Super Duty Air Hammer | Model: 132 | Configuration: Pistol Grip | Actuation: Trigger | Shank Opening: Round | Blows Per Minute: 1,725 BPM | Stroke Length: 4" (102 mm) | Bore Diameter: 0.56" (14 mm) | Overall Length: 8.5" (216 mm) | Tool Weight: 3.4 lbs (1.54 kg) | Average Air Consumption: 3 CFM (85 L/min) | Air Consumption at Load: 11 CFM (311 L/min) | Air Inlet: 1/4" NPTF | Minimum Hose Size: 3/8" (10 mm) | Barrel Material: Alloyed Steel | Piston: Heat-Treated | Power Control: Built-In Power Regulator
Features:
- 1,725 blows per minute provides repeated pneumatic impacts for heavy exhaust repairs, riveting, and mechanical component removal.
- 4-inch piston stroke supports forceful hammering action for kingpin removal, bushing driving, and bolt shearing.
- Alloyed steel barrel provides durability for repetitive automotive repair and maintenance work.
- Heat-treated piston helps resist wear during repeated impact cycles.
- The built-in power regulator lets operators adjust hammer output to the workpiece and application.
- Trigger control provides direct operation when positioning and driving compatible air hammer accessories.
- Round shank opening accommodates properly sized chisels and driving attachments.
- Pistol-grip configuration provides familiar handling for technicians performing vehicle maintenance and component separation.
Applications:
- Automotive front-end service involving kingpin removal, bushing driving, and separation of suitable mechanical components.
- Heavy exhaust system maintenance requiring cutting, shearing, or removal of stubborn exhaust components.
- Vehicle repair workshops performing bolt shearing and removal of seized or damaged components using appropriate accessories.
- Riveting and mechanical assembly operations requiring repeated linear impact action.
- Fleet maintenance and equipment repair involving suitable chipping, punching, and component removal tasks.
FAQs:
- Q: What is the Ingersoll Rand 132 Super Duty Air Hammer used for?
A: The 132 is intended for front-end work, heavy exhaust repairs, riveting, king pin removal, bushing driving, and bolt shearing. Different tasks require appropriately selected and retained air hammer accessories. - Q: What does the 4-inch stroke length mean?
A: The stroke length describes the travel of the air hammer's internal piston, not the length of the installed chisel. The 132 combines its 4-inch stroke with a 1,725 BPM impact rate for mechanical repair tasks requiring repeated hammering action. - Q: What air compressor is required for the Ingersoll Rand 132?
A: Ingersoll Rand specifies 11 CFM air consumption at load and 3 CFM average air consumption. The tool has a 1/4-inch air inlet and requires a minimum 3/8-inch hose according to the current manufacturer specifications. The compressor must maintain the required airflow and operating pressure during the intended duty cycle. - Q: What type of chisels fit the Ingersoll Rand 132?
A: The manufacturer identifies a round shank opening. Compatible replacement chisels are commonly specified with a 0.401-inch shank, but the actual shank size and retention arrangement should be verified against the tool's accessory instructions before ordering. - Q: Can the hammering power be adjusted?
A: Yes. The 132 incorporates a built-in power regulator and trigger control. These allow operators to manage hammer operation according to the workpiece and repair task while maintaining a secure grip and correct accessory positioning.
| SKU | Shank Opening in (mm) | bpm @ 90 psi | Bore Diameter in (mm) | Stroke Length in (mm) | Weight lb (kg) | Length in (mm) | Average Air Consumption cfm (L/min) | Air Consumption @ Load cfm (L/min) | Sound Pressure / Power dBA | Air Inlet NPTF in | Min Hose Size in (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 115 | 0.401" (10.1) | 5,000 | 0.75" (19) | 1.63" (41) | 2.6 (1.18) | 6.1" (155) | 2 (57) | 14 (396) | 101.3 / 114.3 | 1/4" | 3/8" (10) |
| 115K* | 0.401" (10.1) | 5,000 | 0.75" (19) | 1.63" (41) | 2.6 (1.18) | 6.1" (155) | 2 (57) | 14 (396) | 101.3 / 114.3 | 1/4" | 3/8" (10) |
| 116 | 0.401" (10.1) | 3,500 | 0.69" (17.5) | 2.63" (67) | 3.4 (1.54) | 7.8" (198) | 3 (85) | 15 (425) | 104.4 / 117.4 | 1/4" | 3/8" (10) |
| 116K* | 0.401" (10.1) | 3,500 | 0.69" (17.5) | 2.63" (67) | 3.4 (1.54) | 7.8" (198) | 3 (85) | 15 (425) | 104.4 / 117.4 | 1/4" | 3/8" (10) |
| 117 | 0.401" (10.1) | 2,000 | 0.69" (17.5) | 3.5" (89) | 4.1 (1.86) | 9.9" (251) | 3 (85) | 14 (396) | 103.5 / 116.5 | 1/4" | 3/8" (10) |
| 117K* | 0.401" (10.1) | 2,000 | 0.69" (17.5) | 3.5" (89) | 4.1 (1.86) | 9.9" (251) | 3 (85) | 14 (396) | 103.5 / 116.5 | 1/4" | 3/8" (10) |
| 121-K6 | 0.401" (10.1) | 3,000 | 0.75" (19) | 2.28" (58) | 3.5 (1.59) | 7.6" (194) | 3 (85) | 15 (425) | 98.3 / 111.3 | 1/4" | 3/8" (10) |
| 121/Q* | 0.401" (10.1) | 3,000 | 0.75" (19) | 2.28" (58) | 3.5 (1.59) | 7.6" (194) | 3 (85) | 15 (425) | 98.3 / 111.3 | 1/4" | 3/8" (10) |
| 132* | 0.401" (10.1) | 1,725 | 0.56" (14) | 4.00" (102) | 3.4 (1.54) | 8.5" (216) | 3 (85) | 11 (311) | N/A | 1/4" | 5/16" (8) |
Looking for more information about the Ingersoll Rand Hammer? Click here to view the Catalog
For help choosing the correct Ingersoll Rand Hammers for your application, please call (800) 608-5210 or email info@intlairtool.com
- Type
- Air Hammer
- Shank Type
- Round
- Shank Diameter (in.)
- 0.401
- Blows Per Minute (BPM)
- 1725
- Bore (in.)
- 0.56
- Stroke Length (in.)
- 4
- Air Consumption (CFM)
- 11
- Air Inlet
- 1/4" NPT
- Hose Size (in.)
- 5/16
- Configuration
- Pistol Grip
