Dotco 15LS282-62 Light Duty Head Right Angle Pneumatic Drill | 15LS Series | 0.6 HP | 3,370 RPM | Composite Housing | Rear Exhaust

Built for controlled drilling in restricted spaces, the Dotco 15LS282-62 Right Angle Pneumatic Drill pairs a 0.6 HP motor with a 3,370 RPM free speed for precise holemaking, countersinking, and spot-facing where straight drills cannot fit. Its 15LS Series right angle layout helps operators reach inside assemblies, around fixtures, and near structural obstructions, while the composite housing keeps the tool manageable during repetitive production work.

The rear exhaust directs air away from the work area, helping reduce chip movement and improve visibility during close-quarter drilling. With a 1/4"-28 internal thread termination and compact 11.5" overall length, this model is well suited for aerospace, transportation, fabrication, and industrial maintenance applications that require access, speed, and repeatable control.

Type: Right Angle Pneumatic Drill | Series: 15LS Series | Head Type: Light Duty | Power: 0.6 HP / 0.45 kW | Free Speed: 3,370 RPM | Housing: Composite | Exhaust: Rear | Termination: 1/4"-28 Internal Thread | Weight: 2.3 lbs / 1.05 kg | Overall Length: 11.5" / 292 mm | Air Inlet: 1/4"

Features:

• 3,370 RPM free speed provides a balanced speed range for controlled drilling and countersinking.
• 0.6 HP motor supports repetitive production drilling without excess tool bulk.
• Right angle head configuration improves access inside tight assemblies and fixture-mounted work areas.
• Composite housing reduces handling weight during extended use.
• Rear exhaust directs discharged air away from the workpiece and operator.
• 1/4"-28 internal thread termination accepts compatible threaded tooling and adapters.
• Locking lever throttle helps reduce accidental start-up during handling and positioning.

Made in USA:

Applications:

• Aerospace assembly work requiring access around ribs, frames, brackets, and panels.
• Transportation equipment manufacturing for drilling in confined structural areas.
• Metal fabrication shops performing controlled hole preparation and light countersinking.
• Industrial maintenance teams working around guards, housings, and installed machinery.
• Fixture-based drilling stations where a compact right angle pneumatic drill is required.

FAQs:

• Q: How is the 15LS282-62 different from the 15LS281-62?
  A: The 15LS282-62 runs at 3,370 RPM, while the 15LS281-62 runs at 5,430 RPM. Choose this model when a lower speed is preferred for greater control or larger drilling tasks within the same series.
• Q: What does right angle drill mean?
  A: A right angle drill uses a 90-degree head to reach into tight spaces where a straight drill body would interfere with the workpiece or fixture.
• Q: What does the 1/4"-28 internal thread termination do?
  A: It provides a threaded connection for compatible drill adapters, chucks, or tooling designed for 1/4"-28 internal thread use.
• Q: Is this drill used with compressed air?
  A: Yes. This is a pneumatic drill and should be operated with clean, dry, regulated compressed air.

Looking for more information about Dotco Drill? Click here to view the Catalog

Need help selecting the correct Dotco Drills for your application? Please call (800) 608-5210 or email info@intlairtool.com